Vol. 58, No. 3, 2017

Russian Journal of Non-Ferrous Metals

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Russian Journal of Non-Ferrous Metals ISSN 1067-8212.

Mineral Processing of Nonferrous Metals

Application of Immiscible Magnetic Liquids of Different Densities as the Separation Medium for Magnetic Liquid Separation

V. S. Evdokimov and S. I. Evdokimov p. 181 abstract

The Effect of Particle Size, Irrigation Rate and Aeration Rate on Column Bioleaching of Uranium Ore

H. Zare Tavakoli, M. Abdollahy, S. J. Ahmadi and A. Khodadadi Darban p. 188 abstract

Investigation into Flotation Properties of New Collectors when Concentrating Scheelite–Sulfide Ores

L. A. Samatova, V. I. Ryaboy and E. D. Shepeta p. 200 abstract

Metallurgy of Nonferrous Metals

Principal Processing Flowsheet of Copper–Brass Wastes of Metallurgical Brass Production

E. S. Kondratyeva, A. F. Gubin and V. A. Kolesnikov p. 206 abstract

Improving the Precipitation of Arsenic Trisulfide from Washing Waters of Sulfuric-Acid Production of Copper Smelteries

S. V. Mamyachenkov, O. S. Anisimova and D. A. Kostina p. 212 abstract

Effect of Titanium Additives on Carbon Anode Reactivity

Zhiying Li, Nianbing Zhang and Liangying Wen p. 218 abstract

Metallurgy of Rare and Noble Metals

Sorption Technology of Recovery of Indium from Solutions of Zinc Production

K. L. Timofeev, G. I. Maltsev, A. V. Usol’tsev and S. S. Naboichenko p. 225 abstract

Foundry

Investigation of Operational Characteristics of Special-Purpose Alloy Castings

R. K. Mysik, S. P. Pavlinich, B. A. Kulakov, S. V. Bakerin, S. V. Brusnitsyn and A. V. Sulitsin p. 231 abstract

Influence of Orbital Shaking on Microstructure and Mechanical Properties of A380 Aluminium Alloy Produced by Lost Foam Casting

Alptekin Kisasoz, Kerem Altug Guler and Ahmet Karaaslan p. 238 abstract

Physical Metallurgy and Heat Treatment

Boriding of Titanium OT4 from Powder Saturating Media

S. G. Ivanov, M. A. Guriev, M.V. Loginova, V. B. Deev and A. M. Guriev p. 244 abstract

Pressure Treatment of Metals

Computational Methods of the Superplastic Forming Duration of a Round Membrane

A. A. Kruglov, V. R. Ganieva, O. P. Tulupova and F. U. Enikeev p. 250 abstract

Energy Saving and Environmental Protection

Feasibility Study for Recovering Waste Heat in Reduction System of Kroll Process: Energy Analysis and Economic Valuation

Wenhao Wang, Fuzhong Wu and Qingbo Yu p. 258 abstract

Production Processes and Properties of Powders

Microstructures and Mechanical Properties in Powder-Based Additive Manufacturing of a Nickel-Based Alloy

Liting Luo and Xibing Gong p. 269 abstract

A Comparative Study on Physicochemical Properties of Hydroxyapatite Powders Derived from Natural and Synthetic Sources

Soheila Sadat Rahavi, Omid Ghaderi, Ahmad Monshi and Mohammad Hossein Fathi p. 276 abstract

Electrochemical Synthesis of Powders of Holmium and Nickel Intermetallic Compounds in Halogenide Melts

Kh. B. Kushkhov and R. A. Kardanova p. 287 abstract

Preparation Methods and Production of Initial Materials to Prepare Gadolinium Oxide Pellets Used in Fabrication of Composite Uranium–Gadolinium Fuel

T. M. Aldazharov, Yu. G. Rusin, Zh. V. Eremeeva and T. A. Ryspaev p. 292 abstract

Theory and Processes of Formation and Sintering of Powder Materials

Identification of the Modified Drucker–Prager Yield Condition and Modeling of Compaction of the Plasticized Titanium Feedstock

I. M. Berezin, A. V. Nesterenko and A.G. Zalazinskii p. 297 abstract

Self-Propagating High-Temperature Synthesis

Reaction Synthesis of the Ti₂AlN MAX-Phase

D. Yu. Kovalev, M. A. Luginina and A. E. Sytschev p. 303 abstract

Role of Powder Precursors in Production of Composite Alloys Using Liquid-Phase Methods

E. S. Prusov, A. A. Panfilov and V. A. Kechin p. 308 abstract

Nanostructured Materials and Functional Coatings

Temperature Dependence of Heat Capacity of Fe–M Powder Nanomaterials (M—C, Ge, Sn)

L. D. Zagrebin, A. M. Artanov, S. M. Perevozchikov and I. Yu. Mukhametshina p. 317 abstract

Contents