Vol. 59, No. 2, 2023
Effect of the Structure of Passive Oxide Films and Surface Temperature on the Rate of Anodic Dissolution of Chromium–Nickel and Titanium Alloys in Electrolytes for Electrochemical Machining: Part 1. Anodic Dissolution of Chromium–Nickel Steel in a Nitrate Solution
p. 107 abstract
Erosion of an Electrode during a High-Voltage Electric Discharge in a Liquid
p. 116 abstract
Influence of Liquid Composition and Discharge Energy on Process Productivity, Composition and Properties of Particles Produced by Electric Discharge Erosion of WC–5TiC–10Co Alloy
p. 127 abstract
Factors Affecting the Energy Efficiency of Exothermic Transformations during a Controlled High-Voltage Electrochemical Explosion
p. 140 abstract
Impact Assessment of Erosion Development on Medium Motion in a Microelectrode
p. 148 abstract
On Increments of Capillary Waves’ Instability on the Surface of the Charged Electroconductive Jet Moving Relative to Material Medium
p. 156 abstract
Physical and Chemical Properties of Aqueous Solutions of Diethanolamine Borate
p. 163 abstract
Plant Extracts: An Overview of Their Corrosion Mitigation Performance against Mild Steel in Sodium Chloride Solution
p. 172 abstract
Influence of Temperature on Corrosion Behavior of 90/10 Cu–Ni Alloys in Sulfide-Polluted Chloride Solutions
p. 185 abstract
Effect of Adding Y2O3 on Property of Zn Coatings via Pack Cementation
p. 192 abstract
Electrochemical Energy Storage Capacity of Surface Engineered Renewable Carbon Derived from Industrial Tea Waste by HNO3 and K2CO3
p. 199 abstract
Codiffusion of Gallium and Phosphorus Atoms in Silicon
p. 210 abstract
Effect of Manganese Atoms on the Magnetic Properties of Silicon
p. 216 abstract
Characterization of Tin Bronze Substrates Coated by Ag + B83 through Electro-Spark Deposition Method
p. 220 abstract
Study of an Al, Na, Li/Cl Three-Component System for Sodium–Nickel-Chloride Batteries
p. 231 abstract
Modification of Cellulose Acetate Membranes with Unipolar Corona Discharge to Separate Oil–Water Emulsion
p. 236 abstract
Practical Characteristics of Photosensors Based on Semiconductor–Electrolyte Contact
p. 243 abstract
Plasma-Capillary Effect in a Gap Formed by Two Vertically Mounted Cylindrical Rods
p. 251 abstract