Contents

Russian Journal of Non-Ferrous Metals

Vol. 58, No. 5, 2017

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Russian Journal of Non-Ferrous Metals ISSN 1067-8212.

Metallurgy of Nonferrous Metals

Using Acoustic Field Energy to Decrease Dust Discharge from the Working Space of the Vanyukov Furnace

V. I. Matyukhin, V. A. Goltsev, S. Ya. Zhuravlev and V. A. Dudko p. 457  abstract

Metallurgy of Rare and Noble Metals

An Increase in Purity of Ammonium Perrhenate Solutions with Respect to Molybdenum(IV) with the Sorption Recovery of Rhenium(VII) from Mo-Containing Solutions

E. E. Maltseva, A. A. Blokhin, Yu. V. Murashkin and M. A. Mikhaylenko p. 463  abstract

Foundry

Influence of Melting Conditions of Aluminum Alloys on the Properties and Quality of Castings Obtained by Lost Foam Casting

V. B. Deev, K. V. Ponomareva, A. I. Kutsenko, O. G. Prikhodko and S. V. Smetanyuk p. 470  abstract

Influence of Various Types of Treatment on the Structure, Density, and Electrical Conductivity of Deformed Alloys of the Al–Mg System

K. V. Nikitin, V. I. Nikitin, D. S. Krivopalov, V. A. Glushchenkov and D. G. Chernikov p. 475  abstract

Simulation of the Temperature Distribution on the Mold Surface and Inside Casting during High-Gradient Directional Solidification

Yu. A. Bondarenko, A. B. Echin, V. E. Bazhenov and A. V. Koltygin p. 481  abstract

Investigation of Spherisation in Microstructures of Aluminium Casting Alloys for Thixoforging Process

Kerem Altug Guler, Ridvan Gecu, Alptekin Kisasoz and Ahmet Karaaslan p. 489  abstract

Pressure Treatment of Metals

Calculation of Parameters of Drawing-Out the Half-Sphere Parts in the Stamp with an Elastic Element

E. S. Nesterenko and F. V. Grechnikov p. 495  abstract

Physical Metallurgy and Heat Treatment

Effect of Bake Hardening Treatment on the Mechanical Behaviors of Aluminum Alloy Spot Welding Joints

C. Ren, W. J. Dan, R. B. Gou and W. G. Zhang p. 500  abstract

Development and Characterization of Nickel–Titanium–Zirconium Shape Memory Alloy for Engineering Applications

Aun Nawaz Khan, Mohsin Muhyuddin and Abdul Wadood p. 509  abstract

Corrosion and Protection of Metals

Corrosion Behavior on the Different Zones of AA2014 Welded Aluminum Alloy by AA5554 Filler Aluminum Alloy with TIG Process: before and after Solution Heat Treatments Followed by Ageing

Nacer Zazi, Madjid Ifires, Sofiane Mehala and Jean Paul Chopart p. 516  abstract

Production Processes and Properties of Powders

Investigation into the Solubility of Nanopowders of the ZrO2–Y2O3–CeO2–Al2O3 System in the Aqueous Medium at Various pH

E. N. Makarova and I. V. Antsiferova p. 525  abstract

Self-Propagating High-Temperature Synthesis

Nanomaterials of SHS Technology for Tribological Applications: A Review

A. P. Amosov p. 530  abstract

Study of the Mechanism and Regularities of Nitriding the Complex Ferrosilicoaluminum Ferroalloy in the SHS Mode

K. A. Bolgaru, Lu. N. Chukhlomina and Yu. M. Maksimov p. 540  abstract

Refractory, Ceramic, and Composite Materials

Revisiting the Structure of SiC–B4C–MedB2 Systems and Prospects for the Development of Composite Ceramic Materials Based on Them

S. S. Ordan’yan, D. D. Nesmelov, D. P. Danilovich and Yu. P. Udalov p. 545  abstract

Experimental Investigations and Thermodynamic Calculations of the Structural and Phase Composition in the Ti–Si–C System

V. V. Popov, I. I. Gorbachev, A. Yu. Pasynkov, M. N. Kachenyuk and O. V. Somov p. 552  abstract