Vol. 57, No. 5, 2016

Russian Journal of Non-Ferrous Metals

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Russian Journal of Non-Ferrous Metals ISSN 1067-8212.

Mineral Processing of Nonferrous Metals

Mineralization Kinetics of Air Bubbles Allowing for the Particle Detachment and Time of Buoying of Aggregates

V. D. Samygin p. 389 abstract

Metallurgy of Nonferrous Metals

Optimization and Dissolution Kinetics of Vanadium Recovery from LD Converter Slag in Alkaline Media

S. M. J. Mirazimi, F. Rashchi, E. Vahidi and N. Mostoufi p. 395 abstract

Metallurgy of Rare and Noble Metals

Sorption of Palladium(II) from Nitric Acid Solutions by Silica Modified with Amino Groups

E. V. Volchkova, I. V. Boryagina, T. M. Buslaeva, A. A. Ablizov, N. M. Bodnar and E. V. Ehrlich p. 405 abstract

Separation of Zirconium and Hafnium Fluorides by the Sublimation–Sorption Method

I. Yu. Rusakov, A. S. Buynovskiy, V. L. Sofronov and L. D. Ageeva p. 412 abstract

Foundry

Influence of Treatment of Melts by Electromagnetic Acoustic Fields on the Structure and Properties of Alloys of the Al–Si System

I. Yu. Timoshkin, K. V. Nikitin, V. I. Nikitin and V. B. Deev p. 419 abstract

Pressure Treatment of Metals

Temperature Modes and Critical Velocities when Drawing the Wire

G. L. Kolmogorov and N. A. Kosheleva p. 424 abstract

Physical Metallurgy and Heat Treatment

Influence of Annealing on Electrical Resistance and Hardness of Hot-Rolled Aluminum Alloy Sheets Containing up to 0.5% Zr

N. A. Belov, A. M. Dostaeva, P. K. Shurkin, N. O. Korotkova and A. A. Yakovlev p. 429 abstract

Influence of Small Additives of Calcium on the Structure and Properties of ML5 Alloy (AZ91)

I. V. Plisetskaya and A. V. Koltygin p. 436 abstract

Effect of Gd on Microstructure, Mechanical Properties and Wear Behavior of As-Cast Mg–5Sn Alloy

Mengqi Cong, Ziquan Li, Jinsong Liu, Xuefei Miao, Bijun Wang and Qingyang Xi p. 445 abstract

Optimization of Friction Stir Spot Welding Process Parameters of Dissimilar Al 5083 and C 10100 Joints Using Response Surface Methodology

S. Siddharth and T. Senthilkumar p. 456 abstract

Investigation on Effect of Pulse Correction on Structure Property in Dissimilar Welds of Galvanized Steel and Aluminum Alloy Obtained by Gas Metal Arc Welding Cold Metal Transfer

Ali Mehrani Milani and Moslem Paidar p. 467 abstract

Production Processes and Properties of Powders

Influence of Dispersed Microadditives on the Structure and Properties of Powder Carbon and High-Chromium Steels

L. N. Dyachkova and M. M. Dechko p. 477 abstract

Theory and Processes of Formation and Sintering of Powder Materials

Investigation into the Compaction of Nanopowders and Micropowders of Silicon Carbide in High-Pressure Apparatus

A. P. Garshin, S. P. Bogdanov and V. A. Ponomarenko p. 484 abstract

Self-Propagating High-Temperature Synthesis

Formation of the Structure and Phase Composition of the Ti–Al–Ta-Based Materials

O. K. Kamynina, S. A. Bozhko, O. D. Boyarchenko, S. G. Vadchenko, A. E. Sychev, L. M. Umarov, N. V. Sachkova, E. V. Golosov and A. A. Goryainov p. 489 abstract

Refractory, Ceramic, and Composite Materials

Kinetics and Contact Interaction Mechanism of Titanium Carbonitride with the Ni–Mo Melt

V. A. Zhilyaev and E. I. Patrakov p. 497 abstract

Fine Structure of Interphase Boundaries in Hard Alloys of the Chromium Carbide–Titanium System

A. V. Krokhalev, V. O. Kharlamov, S. V. Kuz’min, V. I. Lysak and B. A. Grinberg p. 504 abstract

Modification of Surface Including Beams of Charged Particles and Photon and Plasma Fluxes

Calculation of the Equilibrium State and Thermodynamic Characteristics of Plasma-Forming Gases and the Plasma–“Particle” System

S. A. Il’inykh, B. R. Gel’chinskii, V. A. Krashaninin and N. I. Il’inykh p. 509 abstract

Nanostructured Materials and Functional Coatings

Electrodeposition of Coatings of Double Carbides of Tungsten and Molybdenum from Tungstate–Molybdate–Carbonate Solutions

Kh. B. Kushkhov, F. Yu. Kuchmezova, M. N. Adamokova and A. M. Asanov p. 515 abstract

Contents