Contents
Russian Journal of Non-Ferrous Metals


Vol. 55, No. 3, 2014

A simultaneous English language translation of this journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Journal of Non-Ferrous Metals ISSN 1067-8212.


Mineral Processing of Nonferrous Metals

Thermodynamic Aspects of the Selection of Sulfur-Containing Collectors
during Flotation of Sulfide Ores

Sh. K. Amirkhanova, R. M. Shlyapov, and A. S. Uali p. 219  abstract


Metallurgy of Nonferrous Metals

Calculation of the Reduction Rate of Copper, Nickel, and Cobalt from Oxide Melts
by Carbon(II) Oxide

S. A. Lyamkin, E. N. Selivanov, and N. S. Semenova p. 225  abstract

Synthesis of Nanostructured Aluminum Oxide Granulate

I. M. Verbovenko, V. N. Rychkov, and V. V. Kartashov p. 229  abstract

Preparation of Active Aluminum Hydroxide and Its Use for Production
of Finely Dispersed Alumina

I. V. Loginova and A. A. Shoppert p. 234  abstract


Metallurgy of Rare and Noble Metals

Investigation into the Mechanism of Formation and the Structure of High-Porous Spongy Silver

M. I. Natorkhin, A. P. Garshin, A. V. Bobyl’, V. N. Naraev,
D. V. Agafomov, and R. V. Sibiryakov
p. 238  abstract

Sorption of Rhenium and Vanadium from Mineralized Solutions by Fibrous Ionites

Nway Shwan Oo, I. D. Troshkina, Aye Min, and A. V. Shilyaev p. 242  abstract

Sugar Industry Fly Ash: an Additive for Molding Sand to Make Aluminium Castings

P. Karunakaran, C. Jegadheesan, P. Dhanapal, and P. Sengottuvel p. 247  abstract


Pressure Treatment of Metals

Physical Fields Evolution and Microstructures for Compound Extrusion
of AZ31 Magnesium Alloy

H-J Hu, J-Z Fan, Z-Y Zhai, H Wang, Y-Y Li, and X-B Gong p. 254  abstract


Energy Saving and Environmental Protection

Environmental Pollution Due to Gaseous Emissions during Non-Ferrous Extraction Processes

Manojit Ghosh, P. S. Banerjee, and H. S. Ray p. 263  abstract


Economics and Management

Modern State of the World Market of Gallium

A. V. Naumov p.270  abstract


Theory and Processes of Forming and Sintering of Powder Materials

Investigation into the Influence of Pushing-Out Regulation during the Formation
of Powders on the Quality of Uranium Dioxide Wares

A. V. Gorbushin, B. V. Syrnev, Yu. G. Rusin, and G. M. Shevchenko p. 277  abstract

Investigation into Laser Cladding of Steel–Titanium Carbide Powder Mixtures
on a Steel Substrate

V. K. Narva, A. V. Marants, and Zh. A. Sentyurina p. 282  abstract

Fuel Pellets Based on Uranium Dioxide and Alloyed with Nanodispersed Additives
of Al(OH)3 and TiO2

V. S. Panov, V. Yu. Lopatin, L. V. Myakisheva, V. V. Malovik, and V. V. Martynov p. 289  abstract


Refractory, Ceramic, and Composite Materials

Structural Investigations of Diamond Composites Prepared by the Infiltration
of the Diamond Compact near the Line of Thermodynamic Equilibrium
of Graphite with Diamond

A. V. Elyutin, M. Yu. Belomytsev, A. A. Laptev, N. I. Polyshin, M. N. Sorokin, and A. I. Laptev p. 294  abstract


Nanostructured Materials and Functional Coatings

Gas-Dynamic Spraying of Hydroxyapatite on Medical Instruments from Titanium Alloy

D. A. Pervushin, I. V. Shishkovsky, and I. Yu. Smurov p.298  abstract


Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.