Contents
Russian Journal of Non-Ferrous Metals

Vol. 54, No. 3, 2013

A simultaneous English language translation of this journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Journal of Non-Ferrous Metals ISSN 1067-8212.

Metallurgy of Nonferrous Metals

Dissolution Rate of Lead(II) Oxide in an Equimolar KCl–PbCl₂ Melt

P. S. Pershin, A. A. Kataev, N. I. Shurov, P. A. Arkhipov, and Yu. P. Zaikov p. 195  abstract

Metallurgy of Rare and Noble Metals

Sorption of Gallium from the Alkali Solutions Based on Anionites

D. E. Chirkst, E. A. Cheremisina, O. V. Cheremisina, and M. A. Ponomareva p. 201  abstract

Foundry

Intracrystallite Liquation in Ternary Alloys–Solid Solutions

V. E. Bazhenov and M. V. Pikunov p. 209  abstract

Features of the Low-Frequency Treatment of Melts

I. E. Ignat’ev, E. A. Pastukhov, L. E. Bodrova, E. V. Ignat’eva, and E. Yu. Goida p. 215  abstract

Pressure Treatment of Metals

Computer Simulation of the Production Process for Isothermal Forging of Profiled Panels
Made of Aluminum Alloys

I. L. Konstantinov, I. Yu. Gubanov, and Yu. V. Gorokhov p. 220  abstract

Physical Metallurgy and Heat Treatment

Influence of the Annealing Temperature on the Phase Composition of Al–0.55 wt % Zr Cast Alloy

N. A. Belov, A. N. Alabin, and A. A. Yakovlev p. 224  abstract

Investigation into the Surface Damage of Pure Metals Allowing for the Cyclic Loading Frequency

V. V. Myl’nikov, D. I. Shetulov, and E. A. Chernyshov p. 229  abstract

Corrosion and Protection of Metals

Influence of the pH of the Medium on the Anodic Behavior of Scandium-Doped Zn55Al Alloy

Z. R. Obidov, A. V. Amonova, and I. N. Ganiev p. 234  abstract

Production Processes and Properties of Powders

Synthesis of Nanocrystalline Zirconium Dioxide Stabilized with Yttrium Oxide
for Low-Temperature Sintering

V. B. Kul’met’eva, S. E. Porozova, and E. S. Gnedina p. 239  abstract

Synthesis of the Nanodimensional Powder of Tungsten Carbide for the Development
of Functional Nanocomposite Coatings

D. V. Onishchenko, A. A. Popovich, and Wang Xin Shen p.246 abstract

Theory and Processes of Forming and Sintering of Powder Materials

Solid-Phase Sintering of Al–Cr(Si,Ti) Powder Foundry Alloys Obtained
by Self-Propagating High Temperature Synthesis

G. A. Pribytkov, V. V. Korzhova, and E. N. Korosteleva p. 252  abstract

Organometallic Compound as a Plasticizer to Form Powders

A. G. Ermilov, Yu. A. Instrunina, V. S. Levchenko, and V. Yu. Lopatin p. 261  abstract

Self-Propagating High-Temperature Synthesis

Granulation in the Powder Technology of Self-Propagating High-Temperature Synthesis

A. P. Amosov, A. G. Makarenko, A. R. Samboruk, B. S. Seplyarskii, A. A. Samboruk,
I. O. Gerasimov, A. V. Orlov, and V. V. Yatsenko p. 267  abstract

Self-Propagating High-Temperature Synthesis Metallurgy of Pipes
with Wear-Resistant Protective Coating with the Use of Industrial Wastes of Metallurgy Production

V. N. Sanin, D. E. Andreev, and V. I. Yukhvid p.274 abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.