Contents

Glass Physics and Chemistry

---

Vol. 48, No. 6, 2022

---

Structural Chemistry of Intermetallic Compounds: Geometric and Topological Analysis, Icosahedral Cluster Precursors K45 = Hg@Hg₁₂@Cs₁₂Hg₂₀ and K81 = Hg@Hg₁₂@Hg₃₂@Hg₃₆, as Well as the Self-Assembly of Crystal Structures Cs₆Hg₄₀–cP46 and Cs₁₂Hg₁₆₂–cI174

V. Ya. Shevchenko, V. A. Blatov and G. D. Ilyushin p. 461  abstract

Cluster Self-Organization of Crystal-Forming Systems: Precursor Clusters K13 = Pu@Pu₁₂, K8 = 0@Pu₈, and K4 = 0@Pu₄ for the Self-Assembly of Crystal Structures Pu₄(Pu₁₃)-MS34, Pu₈-mp16, and Pu₄-hP8

V. Ya. Shevchenko and G. D. Ilyushin p. 468  abstract

Cluster Self-Organization of Intermetallic Systems: New Cluster-Precursors K12 = 1Zn@11(Mg₅Zn₆), K5 = 0@5(LiZn₄), K4 = 0@4(Li₂Al₂) in the Li₁₂Mg₂₀Al₈Zn₆₀-oC100 Crystal Structure and K3 = 0@3(CaMgGe), K4 = 0@4(LiCaMgGe), K4 = 0@4(Ca₂Ge₂) in the Li₄Ca₃₂Mg₈Ge₃₂-oP76 Crystal Structure

V. Ya. Shevchenko and G. D. Ilyushin p. 478  abstract

Low-Frequency Light Scattering and Superstructural Groupings in Alkali Borate Glasses

A. A. Osipov and L. M. Osipova p. 487  abstract

Spectroscopic Investigations and Physical Properties of Alkali Arsenate Boro-tellurite Glasses

N. Pujari, A. Edukondalu, K. Birampally, M. Srinivasa Reddy and C. P. Vardhani p. 497  abstract

Theoretical Studies of the Local Structure and EPR Parameters of Tetragonally Distorted Tetrahedral Cu²⁺ Sites in Phosphate Glasses

B. F. Zhang, J. Z. Lin, Y. Zhao, Y. F. Zhang and Y. F. Han p. 511  abstract

Structure of Sodium Borosilicate Glasses: Models and Experiment

A. A. Osipov and L. M. Osipova p. 519  abstract

Solid Carbon Products of Isobutane Decomposition in Laser Plasma

A. V. Povolotskiy, T. I. Sheremet and Yu. S. Tveryanovich p. 537  abstract

Chemical Mass Transfer of Indium Oxide and In₂O₃−Me_xO_y Complex Systems

G. V. Colibaba p. 547  abstract

Phase Transformations and Electrochemical Properties of Heat-Treated Glasses with the Composition of Li-Aegirine

V. V. Rusan, I. P. Alekseeva, O. S. Dymshits, D. V. Agafonov, L. S. Polyakova and E. V. Sentsova p. 558  abstract

Influence of Stone Cutting Waste Addition on Technological Properties of Ceramic Sanitaryware Bodies

Zahide Bayer Ozturk, Nazim Kunduracı and Gulfem Binal p. 570  abstract

Study of Migration Processes and Structural and Chemical Features of Glasses of the Ag–As–Se System as Promising Materials for the Laser Writing of 3D Optical Structures

E. V. Bochagina, V. A. Klinkov, V. A. Markov, V. V. Polyakova and I. A. Sokolov p. 576  abstract

Formation of a Deep Surface Relief in Photo-Sensitive Silicate Glasses

V. P. Kaasik, E. S. Babich, V. V. Zhurikhina, A. A. Lipovskii and D. K. Tagantsev p. 584  abstract

Infrared Spectroscopy of Composite Materials Based on High-Silica Porous Glasses Activated by Bismuth and Yttrium Ions

M. A. Girsova, G. F. Golovina and L. N. Kurilenko p. 588  abstract

Optical Properties of New Cesium-Containing Quartzoid Glasses

T. A. Tsyganova, M. A. Girsova, O. A. Pshenko and L. N. Kurilenko p. 594  abstract

Composition, Structure, and Transport Properties of Bismuth Containing Porous Glasses in KNO₃ Solutions

A. S. Kuznetsova, L. E. Ermakova, M. A. Girsova, I. N. Anfimova, L. N. Kurilenko, A. V. Volkova and T. V. Antropova p. 598  abstract

Phase Formation in the GdFeO₃–SrO System at 1200–1400°С

E. A. Tugova p. 614  abstract

Crystal Structure and Thermal Expansion of a Solid Solution of Sr_1.5Ba_1.5Bi₂(BO₃)₄

A. P. Shablinskii, R. S. Bubnova and S. K. Filatov p. 622  abstract

Phase Equilibrium in NaCl–NaBr–Na₂CO₃ and NaCl–NaBr–Na₂SO₄ Systems

A. A. Finogenov, I. K. Garkushin and E. I. Frolov p. 630  abstract

Comparative Study of Surface Acid-Base Properties of SiO₂ and Al₂O₃ Nanoparticles Prepared by Different Methods

V. V. Syzrantsev, S. V. Mjakin and P. A. Katashev p. 636  abstract

Effect of Temperature–Time Parameters on the Structure and Properties of Glass–Ceramic Composites Based on Molybdenum Disilicide

D. V. Kolovertnov, I. B. Ban’kovskaya and M. V. Sazonova p. 642  abstract

Chemical-Thermal Alloying of Steel Powders for 3D Printing

S. P. Bogdanov, N. A. Khristyuk, K. A. Ogurtsov, S. N. Petrov and S. V. Mjakin p. 646  abstract

Increasing the Corrosion Resistance of Metal Powders for 3D Printing by Creating the Core-Shell Structure

S. P. Bogdanov, K. A. Ogurtsov, N. A. Khristyuk and M. M. Sychov p. 653  abstract

Analysis of Microstructure and Fractal Characteristics of Polymer Based Dielectric Composites with Graphene-Modified Barium Titanate Filler by Box-Counting Method

A. G. Chekuryaev, M. M. Sychov, S. V. Mjakin, V. P. Britov and V. V. Belyaev p. 659  abstract

Microwave Processing of Diamond–Carbide Silicon Composite

A. S. Dolgin, M. V. Keskinova, S. P. Bogdanov and M. M. Sychev p. 664  abstract

Brief Message

Sol-Gel Synthesis of MgO–Al₂O₃–ZrO₂–SiO₂ Coatings on Quartz Ceramics

A. S. Saratovskii, S. K. Evstropiev, K. V. Dukel’skii and V. M. Volynkin p. 669  abstract

Effect of Acid Activation on the Sorption Properties of Synthetic Montmorillonite

O. Yu. Golubeva, E. Yu. Brazovskaya and Yu. A. Alikina p. 673  abstract

Obtaining Solid Solutions Based on Sr₃B₂SiO₈, Doped with Eu³⁺

O. L. Belousova, D. S. Ershov, E. S. Derkacheva and V. L. Ugolkov p. 676  abstract

Effect of Heat Treatment on the Morphology of Montmorillonite Particles

O. Yu. Golubeva p. 680  abstract

Adsorption of Alkali Metal Cations from Model Solutions by Alumosilicate Sorbents with Different Particle Morphologies

E. Yu. Brazovskaya, L. N. Kurilenko and O. Yu. Golubeva p. 683  abstract

---