Vol. 58, No. 6, 2024
Analysis of the Separation Processes of Rare-Earth Elements in the Cascade of Mixing and Settle Extractors by Liquid–Liquid Chromatography Methods
p. 1795 abstract
Mechanochemical Processing Technology of Natural Materials for Plugging Oil Wells in Remedial and Isolation Operations
p. 1810 abstract
Sol-Gel Powder Synthesis for Fabrication of Zircon-Based Ceramic Composites in a Two-Stage Microreactor
p. 1819 abstract
Thermodynamic Analysis of Liquid–Vapor Phase Equilibrium in Binary Systems with One Associating Component
p. 1833 abstract
Steam Reforming Natural Gas in a Membrane Reactor with a Nickel Catalyst at High Temperatures
p. 1839 abstract
Intensification of Vacuum Sublimation Drying of Alginate–Chitosan-Based Matrixes at Various Stages of the Process
p. 1865 abstract
Dynamics of Two-Stage Catalytic Reactions with Marcelin-de Donde Kinetics in an Open System
p. 1875 abstract
Solution of the Inverse Coefficient Problem of Heat and Mass Transfer from the Results of Temperature Measurements in a Horizontal Well
p. 1883 abstract
Polythermal Study of Component Solubility and Phase Equilibria in the Ternary Water–Dipropylamine–Diisopropylamine System for Extraction Applications
p. 1890 abstract
Computer Modeling of Hydrocarbon Fluid Flow in a Chemical Reactor with a Catalyst Layer
p. 1900 abstract
Optimal Organization of Chemical-Technological Systems with Multiple Levels of Aggregation
p. 1908 abstract
Comparative Analysis of Extractive Distillation Systems with Different Phase States of Side Withdrawal from an Extractive Distillation Column
p. 1916 abstract
Study of Surface Wettability in a Modular Contact Device
p. 1929 abstract
Modeling of Production Processes of Polyvinyl Chloride and Caustic Soda, Chlorine, and Hydrogen by Electrolytic Method
p. 1936 abstract
Mechanism of Degradation of Polymer Fuel Cell Cathode Catalyst: Research and Modeling
p. 1945 abstract
Modern Approaches to Development of Flexible Pressure Swing Adsorption Units for Separation of Hydrogen-Containing Gaseous Mixtures
p. 1957 abstract
Experimental Study and Modeling of Dispersion in Spray Drying for Producing Powdered Pharmaceutical Compositions
p. 1980 abstract
Development of a Mathematical Model for Predicting the Physical and Mechanical Properties of Rubber When Introducing a Complex Vulcanization Activator
p. 1991 abstract
Mathematical Model of a Closed Water-Circulation System of Wastewater from Small-Scale Chemical Production
p. 1999 abstract
Application of Magnetic Liquids as Cooling Agents in Condensers of Rectification Columns on the Example of Hydrogen Peroxide Production
p. 2003 abstract
Extraction of Rare-Earth Elements with Deep Eutectic Solvent Di(2,4,4-trimethylpentyl)phosphinic Acid/Phenol
p. 2009 abstract
Self-Healing Coatings Containing Layered Double Hydroxides Impregnated with a Corrosion Inhibitor for Anti-Corrosion Protection of Magnesium Alloys
p. 2017 abstract
Desorption Kinetics of Heavy-Metal Cations onto Titanium Phosphate
p. 2028 abstract
Influence of Distributions of Specific Energy Dissipation Rate on Mass-Transfer Efficiency in Apparatus with Liquid-Phase Media
p. 2034 abstract
Fast Molecular Reconstruction of the Chemical Composition of Complex Hydrocarbon Mixtures
p. 2053 abstract
Physical and Chemical Principles of Increasing the Efficiency of the Methanol Desorption Process
p. 2061 abstract