Vol. 59, No. 5, 2025
Selection and Justification of Hardware Design for Flexible Low-Tonnage Multiproduct Chemical Technology Systems in the Paint and Varnish Industry
p. 1083 abstract
Application of Axial Heat Pipes in Increasing the Isothermicity of Endothermic Chemical Reactors
p. 1093 abstract
Treatment of Industrial Wastewater from Reinforced Concrete Plants in a Hydrocyclone-Filtration Station
p. 1101 abstract
Anticorrosion PEO Coatings Impregnated with Corrosion Inhibitors on AMg3 Alloy
p. 1107 abstract
Influence of Longitudinal Diffusion on the Technological Parameters of a Drum Dryer
p. 1119 abstract
Extraction of Surfactants Using Sorption Materials Based on Energy Production Waste
p. 1133 abstract
Mathematical Simulation of Binary Coalescence Process of Water–Oil Emulsion Droplets
p. 1142 abstract
Crystallization and Solubility of KSc(SO4)2 to Increase the Efficiency of Scandium Extraction
p. 1152 abstract
Experimental and Theoretical Basis of an Energy-Efficient Process of Extraction of a Valuable Component from Natural Matrix Ores
p. 1159 abstract
Plasma-Chemical Synthesis of Benzene During Methane Pyrolysis in a Bubble Column Reactor with a Melt
p. 1166 abstract
Modified Criterion Equation of Convective Mass Transfer in the Process of Adsorption–Alkaline Regeneration of Turbine Oil
p. 1177 abstract
Phase Equilibria and Extraction Properties of Deep Eutectic Solvents in the Ethanol–Benzene System
p. 1183 abstract
Laser-Induced Modification of Carbon Nanomaterials to Create a Conductive Phase in a Polymer
p. 1189 abstract
Modeling the Conversion of Alkanethiols into Disulfides Using Ionic Liquids
p. 1197 abstract
Calculation of Interphase Heat and Mass Transfer in a Spraying Apparatus with a Conical Phase-Mixing Chamber and One Nozzle
p. 1207 abstract
High-Efficiency Continuous Microreactors for Controlled Synthesis of Nanosized Particles of Functional Materials (Review)
p. 1216 abstract
Extraction of Rare Earth Elements with D2EHPA Solution Using a Microcontactor
p. 1223 abstract
Stochastic Analysis of Bulk Charge Component Mixing in a Drum-and-Blades Unit
p. 1230 abstract
Selection of Modes of Cultivation of Methane-Oxidizing Bacteria in a Bioreactor with a Modified Ejector
p. 1243 abstract
Mathematical Model for Gas Cooling in Scrubbers under Diverse Gas-Liquid Interaction Regimes on Trays
p. 1249 abstract
Study of Processes of Strengthening Roasting of Phosphorite Pellets with the Addition of Coke Breeze
p. 1260 abstract
Selection of Temperature–Time Modes for Vacuum Freeze-Drying of Peptide-Based Medicinal Preparations
p. 1269 abstract
Effect of Diesel Fraction Injection Rate on Silicon Removal by a Protective Layer Catalyst
p. 1277 abstract
Heat and Mass Transfer in Continuous Infrared Drying of a Spherical Body
p. 1285 abstract
Vapor Capture of Molybdenum and Tellurium Oxides and their Mixtures on Ceramic Block-Cellular Contact Elements of Optimized Compositions
p. 1292 abstract
Investigation of Micro-Mixing and Energy Dissipation in a Microreactor with Coaxial Chambers and Counter-Current Swirling Flows
p. 1304 abstract
Simulation of the Process of Producing Nanofibers by Solution Blown Spinning
p. 1318 abstract
Structure of Flow during Rising of a Single Bubble in Liquid with a Dissolved Surfactant
p. 1327 abstract
Synthesis of Esters of Pentaerythritol and Isomeric Carboxylic C6 Acids
p. 1338 abstract
Unsteady Mass Transfer in Graphene Oxide Hydrogels in Relation to 3D-Bioprinting Technologies
p. 1345 abstract
Development of the Mineral Fertilizer Industry in the Context of Increasing Resource Efficiency and Ensuring Technological Sovereignty
p. 1354 abstract
Testing the Adsorption Properties of NiMo/Al2O3 Protective Layer Catalyst in the Process of Hydrotreating of Diesel Fuel with Increased Silicon Content
p. 1362 abstract
Energy-Saving Schemes for Extractive Distillation of Crude Methylal
p. 1369 abstract
Synthesis Methods, Purification, and Composition Analysis of Hexafluoroethane: A Review
p. 1383 abstract
Cost-Effective Reconstruction of Existing Two-Stream Heat Exchanger Systems
p. 1416 abstract