Vol. 58, No. 5, 2024
Technology for Producing Isophorone in a Microfluidic Reactor
p. 1495 abstract
Experimental Study of Hydrodynamics and Mass Transfer in Microchannels for Designing Microreactors and Microextractors
p. 1504 abstract
Two-Level Modeling of Phase-Formation Kinetics in the Synthesis of a Composite from Ti–Al–Fe2O3 Powders in 3D Technology
p. 1518 abstract
Approaches to Description of the Composition and Properties of Vacuum Gas Oil for Constructing Mathematical Models of Deep Oil-Refining Processes
p. 1532 abstract
Development of a Mathematical Model for Vacuum Gas Oil Hydrotreating Considering the Kinetics of Desulfurization and Denitrogenation
p. 1545 abstract
Optimal Reactor Regimes for Isoprene Polymerization Process in Bulk
p. 1558 abstract
Theoretical and Experimental Analysis of Granulation in a Fluidized Bed of Diammonium Sulfate Solutions
p. 1569 abstract
Hydrophobic Eutectic Solvents Based on Alcohol and Camphor in the Extraction of Fe(III) from Hydrochloric Solutions
p. 1575 abstract
Study of Favipiravir Micronization by Rapid Expansion of a Supercritical Solution
p. 1584 abstract
Navier–Stokes and Darcy–Brinkmann Models for Synthesis of Micron Particles of Magnesium–Zinc Ferrite
p. 1594 abstract
Localization of Cesium Iodide Vapor on Ceramic Block–Cell Contact Elements in a Nitrogen Environment
p. 1610 abstract
Integration of Turboexpanders into Reactor Blocks of the Dehydrogenation of Processes of Light Alkanes
p. 1619 abstract
Study of Kinetic Processes of the Dislocation of Iron-Containing Sulfates of Aggregated Ore
p. 1630 abstract
Erosive Ultrasonic Cleaning of Cathode Material of a Spent NMC Lithium-Ion Batteries
p. 1640 abstract
Modeling New Drying Processes That Use Supercritical Fluids
p. 1648 abstract
Temperature Dependence of Henry Constants of Radon Adsorption on Activated Carbons
p. 1662 abstract
Gas Fermentation: A Game-Changing Technology from Molecular Engineering to Bioreactors, Modeling, and Optimizing Processes and Apparatuses
p. 1671 abstract
Developing a Two-Phase Bubble Mathematical Model of the Oxidative Regeneration of a Cracking Catalyst
p. 1683 abstract
Developing and Implementing a Fermentation System for Cultivating Methane-Oxidizing Bacteria
p. 1694 abstract
Theoretical Estimates of the Porosity of Raschig Rings in the Wall Region of a Packed Column
p. 1700 abstract
Using Non-Equilibrium Mesoscopic Thermodynamics to Describe the Molecular Mass Distribution of Polymers
p. 1705 abstract
A New Approach to Formulating Low-Viscosity Marine Fuels
p. 1711 abstract
Heat and Mass Transfer when Heating and Drying a Spherical Body in Continuously Acting HF and Microwave Electromagnetic Fields
p. 1718 abstract
Two Types of Limitations in Modeling Chemical Processes at Elevated Pressures
p. 1727 abstract
Locally One-Dimensional Scheme for the Distribution Function Equation by Ice Particle Masses Considering the Interaction of Droplets and Crystals
p. 1745 abstract
Classification of Structural Components of Heterogeneous Fluid Flows
p. 1752 abstract
Droplet Size Distribution of the Liquid Phase in a Vortex Separation Device
p. 1755 abstract
Statistical Processing of Field Data to Predict Additional Production after the Use of Conformance Control Technology
p. 1760 abstract
Droplet Dynamics in the Rotating Layer of a Separator with a Tangent Swirler
p. 1766 abstract
Rapid Neutralization of Acetone Vapors with a Nanodispersed Aerosol of Titanium Dioxide
p. 1771 abstract
The Influence of Surface Tension of Intrapore Fluid on the Structural and Surface Properties of Silicon Dioxide Obtained from Nepheline-Containing Raw Materials
p. 1776 abstract
Thermal Disposal of Waste Oils
p. 1784 abstract
Capture of Fine Particles by a Multivortex Separator in a Paint Drying Chamber
p. 1790 abstract