Vol. 57, No. 5, 2023
Separation of an Industrial Mixture of Decalin or Naphthalene Fluorination Products. Purification of Perfluoro(7-methylbicyclo[4.3.0]nonane) from Close-Boiling Impurities by Heteroazeotropic Distillation
p. 779 abstract
Liquid and Gas Hydrodynamics in Film Regular Sprayed Packings in a Cocurrent Downflow Regime
p. 791 abstract
Analysis of Extraction Separation and Chromatographic Separation in a Cascade of Mixer–Settler Extractors
p. 808 abstract
Additive Technologies for Medicine, Pharmacy, and Chemical Industry: Applications and Outlook
p. 816 abstract
Theory of a Solid–Liquid Heterogeneous Reaction to Form a Gas Phase
p. 828 abstract
Isolation of Ti(IV) Concentrate from Spent Lithium-Ion Batteries
p. 835 abstract
The Role of Energodynamics in the Scientific Bases of Chemical Technology
p. 844 abstract
The Stability Analysis of a Chemical Process in a Flow Reactor
p. 861 abstract
Enhancement of Heat Transfer in a Tube Channel of a Tubular Heat Exchanger
p. 869 abstract
Prediction of the Anticancer Activity of the Fullerene Nanostructure’s Derivatives: DFT Calculations
p. 876 abstract
Kinetically Investigation of Ibuprofen Ozonation Catalyzed by Graphene Oxide/Fe3O4: A Monte Carlo Simulation
p. 889 abstract
Possibilities for Prediction And Evaluation of the Carbon Footprint in Furnace Fuel Oil Combustion in Medium- and Low-Power Boilers
p. 898 abstract
Prediction of Smoke Points of Kerosene Distillates Using Simple Laboratory Tests: Artificial Neural Network versus Conventional Correlations
p. 908 abstract
Design and Control of Ethyl Acetate–Ethanol Separation via Pressure-Swing Distillation
p. 917 abstract
Optimization Study of Calophyllum inophyllum Methyl Ester using Statistical Analysis
p. 933 abstract
Parametric Analysis of a Mathematical Model of a Catalytic Oscillator
p. 946 abstract
Mathematical Description of Electric Mass-Transfer Processes Based on Substance Transfer Equation
p. 952 abstract
Mathematical Modeling and Simulation of Methane Steam Reforming Membrane Reactor
p. 957 abstract
Comparative Calculation of the Interphases Heat and Mass Transfer in Spray Apparatus for the Regimes of Cocurrent and Countercurrent of Phases with Consideration of the Drag Crisis and Heat and Mass Transfer Crisis
p. 967 abstract
Synthesis of Biodegradable Film Made from Sodium Alginate Embedded with Magnesium Nanoparticles for Food Packaging Applications
p. 977 abstract
Synthesis of Pd(0)/C by Pyrolysis of the Cellulose–Saccharose–Palladium Nitrate Powder Composite
p. 985 abstract
On the Additivity of the Impact of Solar Spectrum Quanta Separately and after the Preliminary Proton Irradiation on the Optical Properties of a SiO2-Nanoparticle-Modified Barium Sulfate Powder
p. 991 abstract
Phase Equilibria in Water–Salt Systems Containing Sodium and Calcium Chlorides and Urea at Temperatures below 0°C
p. 997 abstract
Stratiform Anorthosite Associations of Differentiated Basitic Massifs in Russia. Part 1. Deposits and Mineral Composition
p. 1002 abstract
High Temperature Phosphate Investment Material for Precise Casting
p. 1012 abstract
Stratiform Anorthosite Associations of Differentiated Basitic Massifs in Russia. Part 2. Genesis
p. 1016 abstract
The Effect of a Nanotechnogenic Aluminoalkaline Sludge on the Phase Composition, Physicomechanical, and Chemical Characteristics of Earthquake-Proof Brick
p. 1025 abstract
Basalt of Kanzafarova Open Pit Mine: Raw Material for Production of Mineral Fiber
p. 1031 abstract
New Method for the Preparation of NASICON (Na3Zr2Si2PO12) by Pyrolysis of Organic Solutions
p. 1034 abstract
Study of Thermal Decomposition of Layered Double-Magnesium Aluminum Hydroxide
p. 1039 abstract
Use of Ionic Liquids and Binary Extractants in Extraction
p. 1045 abstract
Analysis of Chemical Deposition in the Ca(OH)2–H3PO4–H2O System
p. 1053 abstract
Synthesis of Magnesium Thermal Molybdenum Powders with a Highly Developed Surface
p. 1058 abstract
Pilot-Plant Production of Titanosilicate Sorbents
p. 1066 abstract
Studying the Effect of Successive Irradiation by Electrons and Solar Spectrum Quanta on the Optical Properties of a Nanoparticle-Modified Barium Sulfate Powder
p. 1073 abstract
Study of the Viscosity of Arsenic Acid Solutions
p. 1079 abstract
Study of Reactions in the Na2MoO4–ZrOCl2–ErCl3–H2O System
p. 1083 abstract
Study of the Antimicrobial Resistance of ZnO-Nanocoated Fabrics in Tropical Climates
p. 1088 abstract
Ammonium Salts in the Production of Emulsion Rubbers
p. 1094 abstract
Interaction of Reactive Dyes with Tetraalkylammonium Halides in Aqueous Solutions
p. 1098 abstract
Study of the Possibility of Using Aniline Production Waste to Produce Electrically Conductive Polymers
p. 1104 abstract
Physical and Mechanical Properties of Modified Continuous Basalt Fiber for the Production of Polymer Composite Materials: Experimental Study
p. 1111 abstract
Measurement of the Dynamic Viscosity of Filled Composites on the Basis of Thermosetting Cast Polyurethane
p. 1116 abstract
Composite Photocurable Materials for Repair Purposes
p. 1120 abstract
Metalloporphyrins of Oil from the Severnoe Buzachi Oil Field: UV, IR, and EPR Studies
p. 1126 abstract
Processing of Ancylite-Containing Raw Materials by Sorption Conversion
p. 1133 abstract
Phase Composition of Ceramic Materials Based on Waste of the Fuel and Energy Complex
p. 1141 abstract
Decomposition of Mineral Raw Materials Using a Mixture of Ammonium Hydrodifluoride and Sulfate
p. 1149 abstract
Integrated Technology for Processing of Apatite Concentrate
p. 1154 abstract
Improvement of the Integrated Processing of Lead-Containing Gas-Cleaning Products from the Nickel Production of JSC Kola MMC
p. 1165 abstract
The Effect of Aluminum-Containing Sludge from Chromium Metal Production on Physicochemical Processes upon Burning of Acid-Resistant Wares
p. 1172 abstract
Interaction of Tungsten-Containing Mineral Raw Materials with a Mixture of Ammonium Bifluoride and Sulfate
p. 1181 abstract
Extraction of Rare-Earth Elements from Chloride and Nitrate Solutions in Multicomponent Systems with Di(2-ethylhexyl)phosphoric Acid
p. 1187 abstract
Inorganic Luminophores Synthesized by the Extraction Pyrolytic Method on the Basis of Rare-Earth and Rare Elements
p. 1192 abstract
Sorption of Rare-Earth Metals, Uranium, and Thorium on Phosphor-Containing Solid Extragents of Russian Manufacturing
p. 1206 abstract
On Separation of Rare-Earth Metals in Cascade of Sieve Tray Extraction Columns in the Liquid–Liquid Chromatography Mode
p. 1211 abstract
Simulation of a Fuel Reactor for Chemical Looping Combustion with Oxygen Uncoupling
p. 1215 abstract
Minimizing Specific Energy Consumption of System for the Allocation of Isoprene Based on the Step-by-Step Decomposition Method
p. 1225 abstract
Vibratory Mixing Devices: Constructions and Development Trends
p. 1230 abstract
On the Feasibility of Distributed Heat Supply in Distillation Columns
p. 1242 abstract
Technologies for Rapid Monitoring and Treatment of Oil to Remove Impurities in a Mechatronic Plant Controlled by a Hardware and Software System Using PMR Relaxometry
p. 1249 abstract
Separation of Concentrated Fractions of Target Components from Solutions by Recycling Liquid–Liquid Chromatography
p. 1254 abstract