Vol. 53, No. 5, 2019
Intelligent Logical Information Algorithm for Choosing Energy- and Resource-Efficient Chemical Technologies
p. 709 abstract
Conditioning Heavy-Oxygen Water by Rectification under Vacuum
p. 719 abstract
Modeling n-Pentane Hydroisomerization over a TsVM-Type Palladium-Containing Zeolite Catalyst
p. 725 abstract
Extraction of Iron(III) Chloride Complexes Using the Polypropylene Glycol 425–NaCl–H2O System
p. 735 abstract
Improving the Technological Scheme of Isolation of Butane–Butylene Fraction by Chemisorption Using Tubular Turbulent Apparatus
p. 741 abstract
Calculation of Equilibrium for Multicomponent Mixtures Using the Parameters of Models for Binary Pairs of Pure Components
p. 747 abstract
Increasing the Homogeneity of Liquid Aerated Concrete Mixtures from Dispersed Brittle Materials by Their Vibromixing in the Manufacture of Building Products
p. 760 abstract
Interaction of Water and Suspension Droplets during Their Collisions in a Gas Medium
p. 769 abstract
Modeling and Optimization of Cyclic Adsorption Enrichment of Gas Mixtures with Hydrogen
p. 781 abstract
Bottom Bed in Circulating Fluidized Bed Combustor
p. 793 abstract
Theoretical Foundations of Technology for the Production of Lithium Carbonate by the Ammonia Method
p. 815 abstract
Synthesis of Selective Sorbent LiCl ⋅ 2Al(OH)3 ⋅ nH2O
p. 821 abstract
Application of Layered Double Magnesium–Aluminum Oxides for the Purification of Aqueous Solutions from Dyes
p. 827 abstract
New Deicing Calcium Nitrate–Based Agent
p. 832 abstract
Comparative Characteristics of the Li–Fe–O and Li–Fe–Р–O Powders Obtained by Pyrolytic Extraction
p. 837 abstract
Purification of Crude Ammonium Perrhenate from Potassium by Recrystallization, Sorption, and Membrane Electrodialysis
p. 841 abstract
Production of Chemically Pure Zirconia-Based Nanoceramics in the ZrO2(Y2O3)–Al2O3 System for Restorative Dentistry
p. 848 abstract
Preparation of Nanosized Powder Aluminum, Magnesium, and Zinc Oxides
p. 855 abstract
Copolymerization of Styrene with Methacrylates in Petroleum Bitumen and Properties of Resulting Composites
p. 860 abstract
Methods of Preparing Epichlorohydrin
p. 864 abstract
Extraction of Monocarboxylic Acids from Diluted Solutions with Polyethylene Glycol
p. 871 abstract
The Development of a Method for the Production of Structural Polymeric Materials on the Basis of Norbornene Derivatives
p. 875 abstract
Regularities of Initiated Goudron Cracking in a Flow Reactor
p. 880 abstract
Increasing the Efficiency of Hydrocarbons С5+ Extraction from the Gas of Condensate Fields by a Low-Temperature Absorption Process
p. 886 abstract
Chemistry of Nepheline Formation in the Batch Mixture in Ceramic Production
p. 893 abstract
Physicochemical Properties and Metallurgical Evaluation of Magnesium—Strontium-Containing Limestones
p. 899 abstract
Developing Approaches to Creating a Resource-Saving Technology for the Recovery of Valuable Components (Ultra-Pure Graphite, Diamondlike Carbon, and Strategic Metals) from High-Carbon Rocks
p. 908 abstract
Modification of the Composition of Andesite Raw Material for the Production of Mineral Fibers and Stone Casting
p. 913 abstract
The Distribution of Carbon in a Tungsten–Cobalt Alloy during Heat Treatment in a Gaseous Medium of Carbon Oxides
p. 916 abstract
Interphase Distribution of Lanthanide Salts in Multicomponent Aqueous–Organic Two-Phase Systems
p. 921 abstract
Development and Pilot Testing of New Flow Diagrams for Plutonium Purification at the RT-1 Plant
p. 925 abstract
Prospects for the Development of the Kola Chemical Technological Cluster in Transition from a Resource-Based Economy to an Innovative Economy
p. 933 abstract
Analysis of Extraction Chromatographic Separation of a Binary Mixture in a Series of Multistage Columns
p. 939 abstract
Calculation Studies of the Separation of Rare-Earth Metals by Countercurrent Liquid–Liquid Chromatography
p. 945 abstract
Investigation into the Extraction–Chromatographic Separation of a Binary Mixture in a Series of Multistage Columns
p. 950 abstract