Vol. 51, No. 5, 2017
A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Theoretical Foundations of Chemical Engineering ISSN 0040-5795.
Influence of Solid-Surface Vibrations on Mass Transfer
p. 633 abstract
Separation and Energy Efficiency of Packed Apparatuses for Purifying Gases from Aerosols
p. 639 abstract
Mathematical Model of Formation of Carbon Dioxide Hydrate upon Injection of Carbon Dioxide into a Methane Hydrate Stratum
p. 647 abstract
Experimental Investigation of Trajectory of Motion of Water Drops in a Flow of High-Temperature Gases
p. 658 abstract
Simulation of Heat and Mass Transfer in the Coalescence of Droplets in a Gas-Drop Flow
p. 667 abstract
Filtration Combustion of Viscous Hydrocarbon Liquids
p. 673 abstract
Stokes–Brinkman Flow and Diffusional Deposition of Nanoparticles onto a Layer of Porous and Composite Granules
p. 680 abstract
Role of the Scaling Factor in the Process of SHS Extrusion Based on the Example of a TiC + Co System
p. 686 abstract
On the Shape of the Boundary of a Feasibility Set for Heat-to-Work Converters
p. 694 abstract
Simulation of Systems with Chaos in the Chemical Composition Using Stochastic Methods
p. 703 abstract
Comparison of Distributed Heat Supplies along the Height of Fractionating Columns with Conventional Fractionation
p. 708 abstract
Full Calculation of a Chemical-Technological Complex for Processing of Cracking and Pyrolysis Gases Based on the Kinetic Models of the Processes
p. 716 abstract
Rheology of Structural Oil Disperse Systems
p. 729 abstract
Gas-Dynamic and Thermal Processes in a High-Frequency Induction Plasma Torch with Tangential Stabilization of the Gas Flow
p. 736 abstract
Methods for Calculating the Evaporation Heats of Hydrocarbons and Their Mixtures in a Wide Temperature Range
p. 742 abstract
Morphosyntactic Algorithm for Computer-Assisted Analysis of Systematic Names of Fundamental and Modified Aliphatic Compounds
p. 752 abstract
The Application of Titanium Dioxide Coatings by the Extraction-Pyrolysis Method
p. 759 abstract
Composition, Structure, and Morphology of Nanostructured Aluminosilicates
p. 763 abstract
A New Method for Modifying the Elemental-Phase Composition of Gabbro-Basalt Raw Materials
p. 769 abstract
Application of Magnetic Separation for Modifying the Composition of Basalt Raw Materials
p. 775 abstract
The Effect of Glass Composition and Structure on Photochromic Properties of LiF–Al2O3–B2O3 Glassy Materials
p. 781 abstract
Extraction of Carboxylic Acids with Neutral Extractants
p. 786 abstract
Producing Low-Ash Crystalline Graphite from High-Carbon Rocks of the Far East South
p. 795 abstract
Effect of Indifferent Electrolyte Concentration, Sorbent Thermal Treatment, pH, and the Nature of Ligands on the Sorption of Cu(II) Cations by Glauconite from Nitrate Solution
p. 798 abstract
Development of the Formulation for a Detergent Composition Based on Mixture of Surfactants and Binary Complex Former
p. 804 abstract
Application of Solvent Extraction in the Preparation of Metal Nano- and Microparticles
p. 809 abstract
Nanomodified Textile Materials with Biocidal Properties: Development and Pilot Testing of Manufacturing Technology
p. 815 abstract
Synthesis and Optic Properties of Titanium Dioxide Nanostructures Doped with Alkali Metals
p. 820 abstract
Sulfur-Reduction Additives Based on Ordered Hexagonal Mesoporous Silica in the Catalytic Cracking of Vacuum Gas Oil
p. 825 abstract
Two-Stage Oxidative Desulfurization of Material Containing Oil Sludge
p. 830 abstract
Development Trends of the Rare-Earth Industry in the Russian Federation
p. 835 abstract
Extraction-Pyrolysis Synthesis and Luminescence Properties of Europium Polyniobates
p. 841 abstract
Scandium Extraction from Sulfuric Acid Solutions by Mixtures of D2EHPA and MTAA Sulfate in Toluene
p. 846 abstract
Extraction of Gd, Tb, and Dy from Nitrate Media with a Mixture of Technical Di-2-Ethylhexyl Phosphoric Acid and Tributylphosphate
p. 850 abstract
Process Design of Complex Systems of Rectification Columns and the Evaluation of Their Effectiveness with the Assumption of the Range of Feed Composition
p. 858 abstract
Functional Modeling of Basic Organic Synthesis Using the Case of Vinyl Acetate Production
p. 867 abstract
Theoretical Study of Dynamic Countercurrent Cyclic Extraction Processes for the Separation and Concentration of Components of a Liquid Mixture
p. 872 abstract
Analysis of the Possible Applications of the Acoustic Flow Effect for the Breakup and Transfer of Liquid Substances in a Cylindrical Volume
p. 876 abstract
Extraction Separation of the Components of Leach Liquors of Batteries
p. 883 abstract