Vol. 58, No. 4, 2024

Theoretical Foundations of Chemical Engineering

Principles of Chemical Engineering As a Basis for the Development of the International Concept of Best Available Techniques

V. P. Meshalkin, T. V. Guseva, A. S. Malyavin, I. O. Tikhonova, A. V. Malkow, and C. C. Bhimani p. 943 abstract

Ion Exchange Processes on the H⁺ Cation for Water Hardness Reduction

A. V. Klinov, A. I. Razinov, A. E. Prokopovich, and E. V. Sablin p. 952 abstract

Modeling of Heat- and Mass-Transfer Processes during Convective Drying of Cotton Fabrics

M. K. Kosheleva, and O. R. Dornyak p. 965 abstract

Ultrasonic Liquid Extraction Using Advanced Cavitation in the Process of Disposal of Spent Lithium-Ion Batteries

O. M. Gradov, I. V. Zinov’eva, Yu. A. Zakhodyaeva, and A. A. Voshkin p. 973 abstract

Three-Dimensional Numerical Model of Ultrasonic Coagulation of PM2.5 Aerosol Particles in Vortex Acoustic Flows

V. N. Khmelev, A. V. Shalunov, and R. N. Golykh p. 980 abstract

Synthesis of a Nitride-Containing Composite by Nitriding a Ferrosilicon–Shungite Mixture in a Combustion Mode

O. G. Kryukova, and T. V. Tatarinova p. 993 abstract

Kinetics of Silica Leaching with Ammonium Hydrofluoride from Iron Ore Refinement Tailings

I. S. Medyankina, and L. A. Pasechnik p. 1000 abstract

Theoretical Substantiation of Concentration Polarization in Electrochemical Baromembrane Processes for the Purification of Copper-Containing Solutions from Galvanic Plants

K. V. Shestakov, S. I. Lazarev, M. S. Gessen, D. S. Lazarev, and N. N. Ignatov p. 1007 abstract

Structural Analysis of Phase Diagram and Assessment of Possibility for Distillation of Multicomponent Mixtures

A. V. Frolkova p. 1017 abstract

Methods of Mathematical Modeling of Desorption of Poorly Soluble Gases in Packed Devices

A. G. Laptev, E. A. Lapteva, O. V. Solovieva, and V. A. Klochkova p. 1027 abstract

Modeling of the Flotation Process in an Industrial Apparatus

N. A. Martsulevich, A. V. Kazakov, and O. M. Flisyuk p. 1036 abstract

New Hydrophobic Oil Sorbents Based on Silica Aerogels

L. A. Polevoi, D. A. Sandzhieva, A. E. Baranchikov, A. D. Gaizullin, B. V. Ubushaeva, V. K. Ivanov, V. M. Buznik, and A. G. Dedov p. 1042 abstract

Mathematical Modeling of the Process of Grinding Materials

E. M. Koltsova, M. A. Babkin, N. A. Popova, and A. V. Zhensa p. 1055 abstract

Application of Fractionation and Extractive Distillation for Separation of Butyl Propionate–Propionic Acid–Butyl Butyrate–Butyric Acid Mixture

T. V. Chelyuskina, F. N. Bedretdinov, and S. A. Potemin p. 1064 abstract

Features of Hydromechanical Calculation of an Apparatus with a Precessing Mixer

I. V. Domanskii, and V. A. Nekrasov p. 1073 abstract

Study of Micromixing in a Microreactor with Counter-Current Intensively Swirled Flows

R. S. Abiev, and A. K. Kudryashova p. 1082 abstract

Comparative Efficiency of Extraction Purification of Straight-Run Petroleum Fractions and Gas Oils of Secondary Oil-Refining Processes for Obtaining Marine Fuels

A. A. Gaile, A. V. Kameshkov, V. S. Karnaukh, M. Ahmad, and M. V. Shavrova p. 1098 abstract

Direct Numerical Simulation of Turbulent Thermal Diffusivity

Yu. G. Chesnokov p. 1105 abstract

Influence of Conditions of Microreactor Mixing of Reagent Solutions on the Formation and Photocatalytic Properties of BiVO₄

D. P. Elovikov, I. V. Makusheva, S. M. Tikhanova, M. V. Tomkovich, O. V. Proskurina, R. Sh. Abiev, and V. V. Gusarov p. 1112 abstract

Production, Porous Structure and Sorption Properties of Carbon–Mineral Mesoporous Material from Technogenic Waste

E. A. Spiridonova, V. V. Samonin, M. L. Podvyaznikov, E. D. Khrylova, and S. P. Khokhlachev p. 1123 abstract

Energy-Efficient Engineering of Technologies in the Field of Electrochemical Treatment of Oil-Containing Soils

V. P. Meshalkin, N. S. Shulaev, V. V. Pryanichnikova, and R. R. Kadyrov p. 1135 abstract

Extraction of Li(I), Al(III), and Fe(III) from Hydrochloric Solutions with Hydrophobic Eutectic Solvent TIBPS/Menthol

I. V. Zinov’eva, A. M. Salomatin, Yu. A. Zakhodyaeva, and A. A. Voshkin p. 1143 abstract

Comparison of Selective Agents in the Distillation of a Methanol–Ethanol–Water Mixture

D. A. Ryzhkin, and V. M. Raeva p. 1155 abstract

Intensification of Mass Transfer in a Gas–Liquid Apparatus with a Mixer

N. A. Voinov, A. S. Frolov, A. V. Bogatkova, and O. P. Zhukova p. 1166 abstract

Synthesis of ACS Digital Equivalent by the Ethylbenzene Dehydrogenation Process

A. P. Popov, S. G. Tikhomirov, S. L. Podvalny, O. V. Karmanova, V. K. Bityukov, and O. G. Neizvestny p. 1176 abstract

Critical Phenomena of Rheodynamic Origin in the Process of One-Sided Cold Pressing of Powder Materials

A. M. Stolin, P. M. Bazhin, L. S. Stelmakh, and P. A. Stolin p. 1187 abstract

Viscous Fingering in Supercritical Fluid Extraction

A. A. Salamatin, A. S. Khaliullina, and M. V. Kalinina p. 1193 abstract

Synthesis of Clinoptilolite Zeolite and Investigation the Influence of Various Factors on the Crystallization Process in Natural System Obsidian-Halloysite

A. D. Abbasov, and G. A. Mamedova p. 1206 abstract

The Electrodynamic Separation of Conducting Materials Using Inductors with a Variable Pole Pair Number

Yu. V. Afanas’ev, A. Yu. Demin, D. Yu. Pashali, O. A. Yushkova, and A. I. Shaikhlislamov p. 1218 abstract

Method of Thermal Design of Branched Two-Phase Circuits of Thermal Management Systems

N. O. Borshchev p. 1223 abstract

Thermal Mathematical Model of a Two-Phase Circuit with Mechanical Pump and Thermal Hydraulic Accumulator

N. O. Borshchev p. 1230 abstract

Mathematical Description of the Reciprocating Compressor Taking Into Account the Influence of Suspension Parameters on Its Output Characteristics

M. Yu. Elagin, and R. N. Khmelev p. 1239 abstract

Kinetics of Absorption of Gases with Low Concentrations from Gas–Air Mixtures

R. G. Galimullin, E. V. Garifullina, V. V. Bronskaya, and T. V. Ignashina p. 1245 abstract

Experimental Study of Physical Absorption of Gases at Low Concentrations with Different Solubilities

R. G. Galimullin, V. V. Bronskaya, T. V. Ignashina, E. V. Garifullina, M. I. Kondratieva, and O. S. Kharitonova p. 1252 abstract

Study of the Influence of Speed and Method of Melt Casting on the Development of the Axial Zone in Model Ingots

S. B. Gamanyuk, D. V. Rutskii, N. A. Zyuban, M. V. Kirilichev, D. S. Afonin, and N. A. Burlakov p. 1258 abstract

Computer Simulation of the Flow of Non-Newtonian Two-Phase media in Areas of Complex Geometry

R. I. Ibyatov, F. G. Akhmadiev, R. A. Galimov, and D. M. Galiev p. 1265 abstract

Injection of Superheated Water Vapor into a Porous Reservoir Saturated in the Initial State with Methane and Its Hydrate

M. K. Khasanov, and M. V. Stolpovskii p. 1272 abstract

The Effect of Unsteadiness of Gas Flow in the Matrix Channel of a Rotating Heat Exchanger on its Thermal Parameters during Laminar Flow

A. V. Kostyukov, L. A. Kosach, and V. G. Merzlikin p. 1279 abstract

On the Possibility of Implementing CCS Projects in the Carbonate Reservoirs of the Siberian Platform

A. N. Nikitenkov, D. A. Novikov, A. A. Maksimova, A. V. Penigin, I. V. Varaksina, and E. A. Zhukovskaya p. 1283 abstract

Methodical Approach to Studies of Magnetic Interaction of Fine Particles in an Aqueous Suspension Using Computer Simulation

S. P. Ostapenko, and A. S. Opalev p. 1293 abstract

Analytical Solution to the Equation for the Simplest Natural Circulation Loop of Working Fluid in a Steam Boiler

K. A. Pleshanov, and A. V. Luk’yanov p. 1300 abstract

Design of Pump Stations for Contaminated and Aggressive Liquid Media Based on Digital Information Models

A. I. Repnikov, A. A. Yakovlev, and M. P. Kukhtik p. 1307 abstract

Modeling of Hydrodynamic Processes Occurring inside Separation Equipment Used in Gas-Condensate Fields

R. R. Shafikov, M. M. Farahov, E. V. Garifullina, V. V. Bronskaya, and V. A. Alekseev p. 1311 abstract

Control over the Ratio between Mono- and Divalent Ions in Drinking Water Treatment by Nanofiltration

D. V. Spitsov, A. G. Pervov, and I. A. Abrosimova p. 1316 abstract

Choosing Rational Technologies for the Final Purification of Wastewater from the Production of Protective Coatings and Printed-Circuit Boards

E. A. Uretskii, I. V. Nikolenko, V. V. Moroz, and T. I. Akulich p. 1327 abstract

Capillary Effect in the Layers of Rubber-Fabric Composites

S. Yu. Yamilinets, I. V. Gubanova, M. D. Kozlova, and A. P. Kondratov p. 1334 abstract

Pulse Regulation of the Fluidized Bed in Heat- and Mass-Transfer Devices

O. A. Zalipaeva, T. N. Sinenko, P. P. Zalipaev, and S. G. Postupaeva p. 1340 abstract

On Simulation of Thermal Perturbations Introduced into a Rarefied Plasma by Stationary Canonical Bodies

V. V. Cherepanov p. 1343 abstract

Achievements in the Field of Chemistry of Macroheterocyclic Compounds at the Department of Technology of Fine Organic Synthesis

E. A. Danilova, N. E. Galanin, M. K. Islyaikin, V. E. Maizlish, G. R. Berezina, T. A. Rumyantseva, Yu. V. Suvorova, S. A. Znoiko, and T. V. Kustova p. 1350 abstract

Evolution of Mathematical Models of Non-stationary Heat (Mass) Conductivity Processes in Bodies of Canonical Form

S. V. Fedosov, and M. O. Bakanov p. 1359 abstract

Estimating Expected Variability of the Quality of a Commercial Concentrate on a Processing Plant of a Mining and Processing Enterprise upon Variation in the Mixing Bin Volume

O. D. Ivashchuk, O. O. Ivashchuk, and S. R. Gzonyan p. 1370 abstract

Automating the Evaluation of the Efficiency of Averaging a Commercial Ore Concentrate

O. D. Ivashchuk, S. R. Gzonyan, O. O. Ivashchuk, E. V. Nesterova, S. V. Igrunova, and V. I. Fedorov p. 1375 abstract

Accounting for Fluid Flow when Determining the Pressure Drop in Layers Separated by a Clayey Interlayer

G. R. Izmailova, and A. A. Mugatabarova p. 1380 abstract

An Experimental Procedure for Determining the Equivalent Clearance for Cylinder Piston Seals of a Low-Speed Long Stroke Stage in Dynamic Formulation

R. E. Kobilskiy, and S. S. Busarov p. 1386 abstract

Topological and Physico-Chemical Analysis of Deposits on the Working Surfaces of Heat-Exchange Equipment

A. M. Lasitsa, P. A. Batrakov, A. P. Averchenko, M. S. Peshko, K. N. Poleshchenko, and N. A. Semenyuk p. 1392 abstract

Improving the Efficiency of Surface-Active Substances for Fluid Removal from the Bottom Hole of a Gas Well

N. G. Musakaev, V. A. Ogai, A. Y. Yushkov, and S. L. Borodin p. 1398 abstract

Influence of Internal Heat Exchange Conditions on the Process of Thermal Decomposition of Carbonates in Phosphorus-Containing Raw Materials

V. A. Orekhov, and V. I. Bobkov p. 1402 abstract

Modeling of the Chemical and Energy Technological Process of Roasting Ore Phosphate Raw Materials in a Dynamic Dense Layer of a Roasting Conveyor Machine

V. A. Orekhov, V. I. Bobkov, and M. I. Dli p. 1408 abstract

Improving the Low-Temperature Properties of Fuels with the Addition of Rapeseed Oil for Tractor Diesels

S. A. Plotnikov, Sh. V. Buzikov, I. S. Kozlov, E. G. Zykov, and N. Yu. Kutergin p. 1414 abstract

Development of an Enlarged Adsorber for the Processing of Productive Solutions

G. V. Popov, and V. A. Iodis p. 1422 abstract

Justification of Energy Conservation in the Drying Part During the Modernization of Circulation Bearing Lubrication

V. P. Sivakov, A. V. Vurasko, S. N. Isakov, and K. S. Isaeva p. 1428 abstract

Basic Simulation Methods for Collisions in Particle-Saturated Flows

D. V. Stenko, A. B. Kapranova, I. S. Sheronina, N. V. Badaeva, and S. L. Mazurovsky p. 1435 abstract

Experimental Investigation of the Recovery Coefficient when Polymer Particles Impact with a Baffle Surface

D. V. Stenko, A. B. Kapranova, A. V. Ermolov, E. R. Novikov, and N. N. Maurin p. 1443 abstract

An Experimental Study on the Formation of Rarefied Flows of Granular Polymer Components

D. V. Stenko, and A. B. Kapranova p. 1448 abstract

Analysis of Methods for Simulating the Mixing Process of Granular Components in Rarefied Flows

D. V. Stenko, A. B. Kapranova, and A. V. Ermolov p. 1452 abstract

Study of Anisotropic Properties of Polymer Products Manufactured by FDM Technology

D. V. Stenko, A. A. Khapov, A. B. Kapranova, N. V. Badaeva, and E. R. Novikov p. 1459 abstract

Analysis of Types of Modern Mixing Equipment for Processing Polymer Materials

D. V. Stenko, and A. B. Kapranova p. 1463 abstract

Analysis of Features of Electrical Properties of Polymer Dielectrics

D. V. Stenko, A. B. Kapranova, D. S. Dolgin, E. R. Novikov, and N. N. Maurin p. 1467 abstract

Study of the Combustion Process of Methane Hydrate Taking into Account the Incomplete Evaporation of Water

A. I. Valiakhmetov, and M. V. Stolpovsky p. 1473 abstract

A Conservative Semi-Lagrangian Method for a Continuity Equation with Various Time Steps in Different Parts of the Computational Domain

A. V. Vyatkin, and A. D. Maltsev p. 1478 abstract

The Influence of the Separation Plate Angle on the Efficiency and Hydraulic Resistance of a Multivortex Separator

V. E. Zinurov, V. V. Kharkov, I. I. Nasyrova, A. V. Dmitriev, and A. M. Muginov p. 1488 abstract

Contents

Theoretical Foundations of Chemical Engineering