Vol. 57, No. 4, 2023
Evaluation of the Efficiency of the Separation of Dust–Gas Flows in Uniflow Cyclones
p. 435 abstract
Extraction of Mn(II) and Co(II) from Chloride Solutions with the Di(2-ethylhexyl)phosphoric Acid/Menthol Deep Eutectic Solvent
p. 442 abstract
Method to Calculate the Limiting and Optimal Conditions of the Chemical and Energy Engineering Process of Calcination of Lump and Pelletized Phosphate Ore Raw Materials on the Grate of a Traveling-Grate Roasting Machine
p. 450 abstract
Heat and Mass Transfer in Spray Drying Processes with Convective-Radiant Energy Supply
p. 459 abstract
Mathematical Model and Experimental Data for Water Cooling in Counterflow Film Cooling Towers
p. 469 abstract
Semiempirical Method for Determining the Velocities of Phases During Fluidization and Settling in a Self-Similar Region
p. 478 abstract
Digital Twins for the Porous Structures of Aerogels with the Use of the Cellular Automation Approach and Bezier Curves
p. 482 abstract
Mathematical Modeling of the Flow of Two-Phase Media in Disc Stack Separators with Curvilinear Discs
p. 489 abstract
Reproducibility of the Results of the Conductometric Determination of the Degree of Dilution of the Essentuki-4 Mineral Water
p. 497 abstract
Distillation Separation of the Isobutyl Acetate–Acetic Acid–Isoamyl Acetate Industrial Mixture
p. 503 abstract
Generalized Dependence of the Viscosity of Particulate-Filled Polymer Composite Materials with Different Types of Structures
p. 515 abstract
Physical Feasibility and Synthesis of Heat Exchange Systems According to Thermodynamic Parameters
p. 524 abstract
Methods of Optimization Thermodynamics in Distillation Processes
p. 537 abstract
A Hybrid Membrane for the Simultaneous Selective Sorption of Cesium in the Ionic and Colloid Forms
p. 549 abstract
A Review on Different Treatment Possibilities of Dairy Wastewater
p. 563 abstract
Study Into Obtaining Biogas Through Aloe Vera Waste
p. 581 abstract
Reliability of Nanofiltration Membrane Process or Brackish Water Treatment in Baghdad City: Module Modeling and Simulation
p. 589 abstract
Absorption of Lanthanum Ions by the SrSO4 Crystal Matrix
p. 597 abstract
Production of Magnesium Carbonate and Magnesium Oxide from Brines of the Volgogradskoe Bischofite Deposit
p. 603 abstract
Study of the Effect of Urea on the Corrosivity of Sodium and Calcium Chlorides to Steel and Aluminum Alloys
p. 607 abstract
Regularities of the Transition from a Bi–Te Metal System to a Bi2O3–TeO2 Oxide System upon Oxidation
p. 611 abstract
Characteristics of Layered Double Magnesium–Aluminum Hydroxides in the Sorption of Complex Hexathiocyanochromate(III) Ions
p. 616 abstract
Physicochemical Modeling of Melting and Crystallization Processes of Latite and Trachyte
p. 624 abstract
Effect of Treatment Conditions of Capacitor Structures Based on Porous Silicon and Ferroelectric on Their Dielectric Losses in the HF and Microwave Ranges
p. 628 abstract
Studying the Dihydrate Stage of the Process of Preparation of Extractive Phosphoric Acid by the Dihydrate–Hemihydrate Method from Low-Grade Phosphorites
p. 633 abstract
Effect of the Pyrolysis Temperature of Precursors on the Luminescent Characteristics of Borates La0.95Eu0.05BO3 and La0.95Eu0.05(BO2)3
p. 638 abstract
Features of Methods to Produce High-Purity Arsenic
p. 644 abstract
Phase Equilibria in the Sodium Formate–Glycerol–Water System at Temperatures Below 0°С
p. 650 abstract
Choice of Conditions for Drying Fluxes for Magnesium Alloys Based on Thermal Analysis Data
p. 653 abstract
Flax Fibers: New Opportunities for “Green” Nanotechnology
p. 660 abstract
Preparation of Bismuth Ammonium Citrate
p. 670 abstract
Effect of an Alkaline Etching Sludge on the Technical Parameters and Phase Composition of Composite Acid-Resistant Ceramic
p. 675 abstract
Estimating the Ultimate Porosity of Basalt–Plastic Composites in Climatic Tests under Northern Conditions
p. 682 abstract
Estimation of the Porosity of a Bilayered Fibrous Composite Material by Various Methods of Digital Microstructure Processing
p. 689 abstract
Study on Processing of Copper-Sulfide Concentrate
p. 695 abstract
Preparation of Building Materials from Waste Aluminosilicate Rocks
p. 698 abstract
Studying the Hemihydrate Stage of the Process of Preparation of Extractive Phosphoric Acid by the Dihydrate–Hemihydrate Method from Low-Grade Phosphorites
p. 704 abstract
Application of Multicomponent Two-Phase Systems in Liquid–Liquid Chromatography
p. 709 abstract
Extraction of Rare Earth Elements from the Phosphate Concentrate of Apatite Processing
p. 714 abstract
On the Interphase Distribution of Nickel(II) and Vanadium(IV) Ions in a System Based on PEG-1500
p. 720 abstract
Calculation Algorithm of Volumes of Medium-Level Radioactive Wastes Solidified Into Cement or Magnesium–Potassium Phosphate (MPP) Matrix
p. 725 abstract
Complexation of Europium(III) with Acetylacetone and Trialkylbenzylammonium in Extraction Systems According to Luminescent Spectroscopy Data
p. 732 abstract
Developing a Hydrodynamic Model for the Mixing Chamber of a Centrifugal Extractor
p. 738 abstract
Trends and Prospects in the Development of Gas-Lift and Bubble Equipment Designs
p. 745 abstract
Purification of Phenol and Chloroform from Impurity Components by Extractive Rectification
p. 754 abstract
Influence of the Shape of Differential Response Curve on Design Calculations of Chemical Reactor
p. 760 abstract
On the Operation of a Cascade of Mixing and Settling Extractors in the Modes of Chromatography and in Free Liquid Membranes
p. 764 abstract
Efficiency of Heat Pumps in Extractive Rectification of the Allyl Alcohol–Allyl Acetate Mixture with Different Compositions of the Feed: Part 1. Application of Heat Pumps in Schemes with Two-Selection Columns
p. 770 abstract