Vol. 52, No. 4, 2018
A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Theoretical Foundations of Chemical Engineering ISSN 0040-5795.
Theory and Practice of Mixing: A Review
p. 473 abstract
Isotope Purification of Gases Containing Deuterium and Tritium by the Method of the Phase Isotopic Exchange of Water
p. 488 abstract
Mathematical Modeling and Experimental Studies of the Joint Electrodeposition of Gold and Silver from Sulfuric Acid Thiourea Solutions on Flow-Through 3D Electrode Taking into Account Its Nonstationary State
p. 495 abstract
Effect of the Porous Structure of a Catalyst on the Rate of Its Deactivation in the Claus Reaction
p. 506 abstract
Structure of a Viscoplastic Flow During the Mold-Filling Process
p. 514 abstract
Studying the Chemical and Energy Engineering Process of the Strengthening Calcination of Phosphorite Pellets Containing Free Carbon
p. 525 abstract
Simulation of Hindered Sedimentation of the Coarse Fraction of a Bidisperse Suspension in the Presence of Interfractional Coagulation
p. 533 abstract
Simulation of Hydroisomerization of n-Pentane into 2-Methylbutane on a Palladium-Containing Mordenite Catalyst
p. 545 abstract
Modeling Belt Press Filter Performance in Fine Suspension Dewatering
p. 554 abstract
On the Applicability of a Quasi-Stationary Solution of the Diffusion Equation for the Hydrate Layer Formed at the Gas–Ice (Water) Interface
p. 560 abstract
Polymer Degradation in a Solution: Monitoring and Predicting Quality Parameters
p. 568 abstract
Influence of Reagents Flow and Composition on Filtration Combustion Characteristics of Heavy Hydrocarbons-Containing Systems
p. 574 abstract
Study of the Composition, Structure, and Sorption Properties of Nanostructured Aluminosilicates
p. 581 abstract
Phase Equilibria in Water-Salt Systems Consisting of Potassium, Sodium, and Ammonium Carbonates and Anti-Icing Properties of Carbonate Compositions
p. 587 abstract
Functional Composites: Low-Temperature Extraction-Pyrolysis Synthesis and Its Properties
p. 591 abstract
The Preparation, Properties, and Application of Nanosilica Based on Hydrothermal Solutions
p. 599 abstract
Preparation of Silicon Dioxide with a Fixed Content of Fluorine from Fluorosilicic Acid
p. 607 abstract
Modern Classification of the Rocks of Gabbro-Basalt Raw Materials Occurring in Russia
p. 612 abstract
Preparation of Tungsten Carbide from Scheelite Concentrate using Concentrated Energy Fluxes
p. 619 abstract
Copper and Iron Extraction from Nickel Sulfate Electrolytes Using Binary Extractants
p. 624 abstract
Stabilization of Zinc Peroxide in the Combined Process of Granulation and Encapsulation
p. 628 abstract
Niobium and Tantalum Powders from Lithium Niobate and Lithium Tantalate Production Waste
p. 634 abstract
Experimental Study of Separating and Concentrating the Components of Liquid Mixtures by Dynamic Countercurrent Cyclic Extraction
p. 638 abstract
New Approach to Obtain Neutral Ester of Phosphoric Acid: Tris(2-chloroisopropyl) Phosphate
p. 643 abstract
Production of Cellulose from Oat-Processing Waste by the Hydrotropic Method Followed by the Synthesis of Cellulose Nitrates
p. 648 abstract
Cyclohexanone: The Main Methods of Obtaining and Extracting Target Products from a Reaction Mixture
p. 653 abstract
Investigation into the Process of Hydrotropic Delignification of Oat Straw in the Universal Thermobaric Unit
p. 661 abstract
Optimization of the Production Process of Biologically-Active Betulin Diacetate from Raw and Activated Birch Bark
p. 664 abstract
Polymer Composite Materials Based on Basalt
p. 670 abstract
Treatment of Sulfide Alkali Waste Waters from Mercaptans Using Distillation
p. 673 abstract
Peroxide Oxidative Desulfurization of a Diesel Fuel
p. 677 abstract
Activated Low-Temperature Viscosity Breaking of Heavy Oil with Additives of Iron Particles and Asphaltene and Paraffin Deposits
p. 681 abstract
Prospects for the Recovery of Finely Dispersed Gold Particles in the North
p. 686 abstract
Morphology and Properties of Red Iron Ore Powder
p. 690 abstract
Preparation of Brown Iron Oxide from Secondary Raw Material
p. 696 abstract
Scandium Extraction from Chloride Solutions by a Mixture of Tributyl Phosphate and Molecular Iodine
p. 701 abstract
Testing the Filtering Process for Spent Zinc Melt After Removal of Fuel Cladding with the BOR-60 Reactor SNF Nitride
p. 707 abstract
Variants of Electrochemical Processing of Rhenium-Containing High-Temperature Alloy
p. 711 abstract
Multi-Stage Recrystallization of Crude Ammonium Perrhenate
p. 717 abstract
Use of Modified Sorbents Based on Activated Carbon BAU-A for the Extraction of Nonferrous Metals from Aqueous Solutions
p. 725 abstract
Comparison of Heat Consumption in the Separation of Binary Mixtures Using Distillation and Rectification
p. 730 abstract
Analysis of the Operating Conditions of a Continuous Linear Crystallizer
p. 735 abstract
Separation of Liquid Mixtures and the Minimum Steam Rectification Stream
p. 743 abstract
Detailed Consideration of the Shock-Wave (Pulsation) Concept of the Ranque–Hilsch Vortex Effect
p. 751 abstract
Low-Concentration Nitrogen Oxide Recovery Unit
p. 760 abstract