Vol. 60, No. 2, 2026
Preparation of Titanosilicate Compositions by Heterogeneous Synthesis
p. 223 abstract
Influence of Ammonia Vapor on the Catalytic Removal of N2O from Air Streams
p. 231 abstract
Influence of Water Absorption of Perlite Rock on the Properties of Expanded Perlite and Thermal Insulation Materials Based on It
p. 237 abstract
Chemical and Mineral Composition of Rhyolite from the Kizilskoe Deposit
p. 243 abstract
Codeposition of a Nickel–Vanadium Alloy from a Sulfate–Chloride Electrolyte
p. 248 abstract
Optimization of Cerium Carbonate Precipitation from Nitric Acid Solutions
p. 253 abstract
Adsorption of Lithium from Aqueous Solutions by Layered Double Magnesium Aluminum Hydroxide
p. 263 abstract
Chemical Processing of KU-2×8-Ag Cation-Exchange Resin in a Nitrating Atmosphere
p. 270 abstract
Anti-Icing Compositions Based on Urea and Ethanol
p. 277 abstract
Oxidative–Extractive Desulfurization of Straight-Run Diesel Fraction Using the Ionic Liquid [BMIM][BF4]
p. 280 abstract
Phase Equilibria in Cross-Sections of the Urea–Isopropanol–Water System at Subzero Temperatures
p. 283 abstract
Optimization of the Recovery Process of Nitrile Butadiene Rubber from Latex
p. 286 abstract
Application of Alcohols in Mixtures with Urea as Liquid Deicing Compositions
p. 291 abstract
Deposition Rate of Chromium-Based Nanocomposite Coatings
p. 295 abstract
Morphological Study of Polyethylene Glycols and Polyethylene Oxide with Different Molecular Weights
p. 300 abstract
Using the DeepSeek Neural Network to Model the Formation of a Porous Surface Structure of Flat Basalt Fiber-Reinforced Polymer Composite Materials at the Initial Stage of Climatic Degradation
p. 305 abstract
Chemical Treatment of the Near-Wellbore Zone for Enhanced Oil Recovery
p. 310 abstract
Effect of Heat Treatment Time on the Mechanical Properties of Basalt Fiber Composite Material
p. 315 abstract
Investigation of Processing of Copper–Molybdenum Concentrator Tailings for Recovery of Valuable Components
p. 318 abstract
The Influence of Slag from Ferrotitanium Smelting on the Chemical Resistance of Acid-Resistant Materials
p. 322 abstract
Effect of Temperature Conditions of Heat Treatment on the Mechanical Properties of Basalt Fiber Composite Material
p. 329 abstract
Static Sorption of Ammonium Ions by Zeolite Derived from Ash and Slag Waste from Thermal Power Plants
p. 332 abstract
Necessity of Selective Mining of Perlite Rock for Producing Homogeneous Perlite Raw Material
p. 340 abstract
Effect of NaOH on the Synthesis of Cobalt-Doped Willemite
p. 345 abstract
Study of Processing of Molybdenum Concentrate with Caustic Soda in the Absence of Air
p. 354 abstract
Development of a Method for Clarification of Triuranium Disilicide Spent Nuclear Fuel Solutions Using a Modified Contact Filter
p. 358 abstract
Technological Efficiency of Capturing Model Mixtures of Surrogate Compounds of Volatile Fission Products Using Ceramic Honeycomb Contact Elements
p. 362 abstract
Removal of Impurities from Uranium Product via Crystallization Refining in a Linear Crystallizer
p. 374 abstract
Study of the Possibility of Concentrating Micro- and Nanogold in Refractory Sulfide Ores
p. 381 abstract
Specific Heat Consumption in Distillation Depends Only on the Reflux Ratio and Does Not Depend on the Vapor Ratio
p. 387 abstract
Influence of Coagulation–Filtration Processes on the Turbidity Dynamics of Natural Water
p. 395 abstract
Service Life of a Hydrodynamic Filter during Removal of Mechanical Impurities from Rheologically Complex Liquids
p. 403 abstract
Analytical Calculation of a Condenser Taking into Account the Longitudinal Thermal Conductivity of the Liquid Being Heated
p. 413 abstract
Technological Efficiency of Reverse Osmosis Treatment of Chromium-Containing Industrial Solutions
p. 421 abstract
Technology for Application of a New Proton Magnetic Resonance Relaxometer for Rapid Monitoring of Oils and Gas Condensate
p. 428 abstract