Vol. 58, No. 2, 2024
Synthesis and Structural Study of Sodium Dodecyl Sulfate–Butanol-1–Kerosene–Aqueous Acid Solution Emulsions Suitable for the Chemical Polishing of Copper and Aluminum Surfaces
p. 233 abstract
Chemical and Mineral Composition of Dolerite of the Dergamysh Deposit
p. 240 abstract
Statistical Regularities of Forming Porosity in Plane-Parallel Basalt-Plastic Composite Materials during Climatic Degradation and Forecasting Their Properties
p. 243 abstract
Anticorrosion Hydroxyapatite-Containing Coatings for the Functionalization of Bioresorbable Magnesium Alloys
p. 250 abstract
The Effect of Na, Si, and P on the Phase Composition of Zirconium and Sodium Silicophosphates (NASICON)
p. 261 abstract
New Hybrid Coatings for Controlling the Degradation Rate of MA8 Magnesium Alloy
p. 266 abstract
Carbon Molecular Sieves for the Sorption Recovery of Gold from Cyanide Solutions
p. 277 abstract
Spodumene Pegmatites of the Tastyg Deposit as a Promising Source of Lithium
p. 281 abstract
Composite Material Based on Mineral Fibers and Gabbro from the Navolokskoye Deposit
p. 284 abstract
Controlled-Release Fertilizers—A New Development in the Fertilizer Market (a Review)
p. 287 abstract
Extraction of Carboxylic Acids with Binary Extractants and Bifunctional Ionic Liquids
p. 295 abstract
Adsorption Accumulation of Natural Methane Gas
p. 300 abstract
Production of Sea Buckthorn Oil via Supercritical Carbon Dioxide Extraction of Sea Buckthorn Fruit Pressed Cake with Subsequent Centrifugation
p. 303 abstract
Rates of Formation of Silaethylene and the Methyl and Silyl Radicals by the Pyrolysis of Methylsilane
p. 308 abstract
Localization of the Products of Gas Conversion of the Tokem-308 Resin
p. 316 abstract
Aerobic Oxidation of Organosulfur Compounds in the Presence of Fe3O4 Nanoparticles
p. 323 abstract
Development of a Sorbent Based on Chitosan and Vermiculite for Textile Wastewater Treatment
p. 330 abstract
Chemical Destruction of Tokem-308 Cationite (Analog of KU-2x8) in the HNO3(vapor)–Air Atmosphere
p. 334 abstract
Method for Obtaining Aqueous Colloidal Dispersions of Magnetically Sensitive Polymer Microspheres Resistant to Organic Solvents
p. 341 abstract
Comparative Analysis of the Effect of HDPE and UHMWPE on the Properties of Nitrile Butadiene Rubber
p. 346 abstract
Study of the Properties of Polyamide-6 Prepolymer Granulate
p. 353 abstract
Processing of Caps and Fixing Rings of Plastic Bottles: A New Approach
p. 355 abstract
Static Sorption of Petroleum Products by a Sorbent Made from Ash-and-Slag Waste of the Thermal Power Industry
p. 363 abstract
Problems and Prospects of Production of “Green” Hydrogen (a Review)
p. 370 abstract
Nitric Acid Processing of Perovskite Concentrate under Atmospheric and Autoclave Conditions
p. 379 abstract
Implementation of an Integrated Technology for Processing Brines of the Calcium Chloride Type to Obtain a Bromineless Lithium Concentrate
p. 386 abstract
Mn and Cr Extraction from the Secondary Wastes of Metallurgical Combines by Gas-Phase Conversion in Nitriding Media
p. 391 abstract
Extraction Purification of Concentrated Nickel Chloride–Sulfate Solutions from Impurities at AO Kola Mining and Metallurgical Company
p. 397 abstract
Decomposition of a Lean Yttrofluorite Concentrate by the Method of Sorption Conversion
p. 403 abstract
Doping of Lanthanum(III) Orthoborates and Metaborates with Europium(III) and Yttrium(III) Ions
p. 409 abstract
Decomposition of a Waste Catalyst Containing Palladium in the Surface Layer
p. 417 abstract
Features of the Extraction of Rare Earth Elements from Igneous and Sedimentary Phosphate Ores
p. 421 abstract
Rational Technology for Separation of Rare Earth Elements Isolated from Monazite
p. 425 abstract
The Use of Mixtures of Extractants for the Recovery and Separation of Rare Earth Elements
p. 432 abstract
Extraction of Cesium and Strontium from Nitric Acid Solutions with Crown Ethers in Heavy Diluents
p. 438 abstract
Studying the Process of Gold Leaching after the Oxidative Roasting of a Refractory Gold-Bearing Concentrate
p. 444 abstract
Effect of Supercritical Carbon Dioxide Compression Heating in Both Stationary and Flow Regimes
p. 450 abstract
Comparison of Algorithms and Results of Design and Verification Versions for Calculation of Chemical Technology Apparatuses
p. 456 abstract
Mathematical Simulation and Optimization of Continuous Dihydrate–Semihydrate Production of Wet Process Phosphoric Acid From Low-Grade Ores
p. 463 abstract
Study of the Efficiency of Using an Electrochemical Module to Generate Ferrates while Treating Wastewater from Meat Processing Plants
p. 469 abstract
Flow Structure of Bead Mills with a Centrifugal System for Separating Beads from a Crushed Suspension
p. 475 abstract
Static Optimization of the Process of Separation of Marketable Ethylene from Pyrolysis Products in a Multi-Column Rectification Unit
p. 480 abstract