Vol. 58, No. 1, 2024
A Study of the Phase Composition of a More than One-Hundred-Year-Old Ceramic Material
p. 1 abstract
Phase Equilibria in Calcium Nitrate–Propylene Glycol–Water System Sections at Temperatures from 0 to –60°C
p. 7 abstract
Physicochemical and Petrographic Studies of Perlite Rock Classified by Density
p. 10 abstract
Effect of the Synthesis Conditions and Nature of Precursors on the Phase Composition of Zirconium and Sodium Phosphatosilicates (NASICON)
p. 16 abstract
Anti-Icing Properties of Calcium Nitrate–Ethanol–Water Compositions at Temperatures below 0°C
p. 22 abstract
Phase Equilibria in CaCl2–CaCl2⋅4CO(NH2)2–H2O System Sections at Temperatures from 0 to –55°C
p. 25 abstract
Surface Tension of Arsenic Acid Solutions
p. 29 abstract
Processing of Sludge Waste to Produce Ceramic Materials
p. 33 abstract
Chemical and Mineral Composition of Anorthosite (Karelia, Russia)
p. 38 abstract
Effect of Rehydration Conditions on the Physicochemical Properties of Reduced Layered Double Hydroxides of Magnesium and Aluminum
p. 41 abstract
Oxide Films Produced by the Extraction–Pyrolytic Method with Different Transmission and Absorption Characteristics in the UV Range
p. 48 abstract
Removal of Organic Contaminants from Wastewater by Electrochemical Oxidation
p. 54 abstract
Features of Behavior of Acridinium Salt in the Production of Emulsion Rubbers
p. 60 abstract
New Azo Dyes Based on 2-Methylresorcinol for Polycaproamide Fibers
p. 65 abstract
Preparation of Bismuth Subsalicylate from Bismuth Subnitrate
p. 71 abstract
Prospects of Using Taurine in the Production of Emulsion Rubbers
p. 76 abstract
New Sulfoaluminate Matrices for Solidification of Radioactive Sodium Nitrate Concentrates
p. 81 abstract
Inhibition of Spontaneous Polymerization during the Synthesis of Epoxyacrylic Oligomer
p. 90 abstract
Effects of Desilication Conditions on the Formation of Wollastonite during the Autoclave Leaching of Silica–Titanium Concentrates
p. 95 abstract
On the Possibility of Using Silicon Dioxide Obtained from Mineral Raw Materials as an Enterosorbent
p. 101 abstract
Method of Integrated Processing of Copper Sulfide Concentrate
p. 109 abstract
Capabilities of an Instrumental Neutron-Activation Analysis for Determination of Scandium and Its Controlled Extraction from CHPP Ash Dumps
p. 114 abstract
A Study of the Process Kinetics of Acidic Decomposition of Eudialyte
p. 122 abstract
Perlite Processing Method
p. 132 abstract
Humate Agents based on Oxidized Brown Coal in the Flotation Enrichment of Impregnated Copper–Nickel Ores
p. 137 abstract
Physicochemical Processes in the Firing of Acid-Resistant Materials Based on Unenriched Kaolin and High-Alumina Ferrochrome Production Slag
p. 144 abstract
Extraction Separation of Molybdenum by Means of CYANEX®600 from Solutions for Nitric Acid Leaching of Industrial Products
p. 152 abstract
The Effect of the Conditions of Extractive–Pyrolytic Synthesis on the Luminescence Characteristics of Inorganic Luminophores Based on Mixed Oxides of Rare-Earth and Rare Elements
p. 159 abstract
Preparation of Mixed Uranium Oxide and Plutonium Powders Using a Thin-Film Rotary Apparatus
p. 169 abstract
On the Effect of Sensitizing Ions on the Spectral Luminescent Characteristics of the Eu3+ Activating Ion in Lanthanum Ortho- and Metaborates
p. 176 abstract
Estimation of Radiation Effect on the Process Parameters upon Extraction of Cm and Am by Displacement Complexation Chromatography
p. 182 abstract
Extraction of Lanthanides from Nitrate Solutions in Multicomponent Systems in the Presence of Cyanex 572
p. 188 abstract
Efficiency of Using Heat Pumps in the Extractive Rectification of an Allyl Alcohol–Allyl Acetate Mixture Depending on the Composition of the Feed. Part 2. Application of Heat Pumps in Column Complexes with Partially Coupled Heat and Material Flows
p. 192 abstract
Regularities of Extractive Distillation of the Methanol–Acetonitrile–Tetrahydrofuran–Water Mixture under Various Pressures
p. 202 abstract
Reagent-Free Technology for Intensifying the Process of Growing Microgreens in Aquaponic Systems
p. 211 abstract
Combining Special Techniques when Developing Separation Schemes for a Methanol + Water + Methyl Methacrylate Mixture
p. 217 abstract
Filter Replacement Modes for Respirators Protecting Workers from Exposure to Industrial Gases (Review)
p. 224 abstract