Vol. 52, No. 6, 2026
Specific Energy Characteristics of the Plasma-Electrolyte Process for Producing Hollow SiO2 Particles
p. 271 abstract
A Numerical Study of the Influence of Diffusion Transfer of Electrolyte through a Porous Layer on a Deposited Coating
p. 275 abstract
Stages of Formation of Thin-Walled Hollow SiO2 Particles in a Plasma-Electrolyte Discharge
p. 280 abstract
The Influence of Plasma Treatment on the Tribotechnical and Physicomechanical Characteristics of Leather Materials for the Interior Surface of Footwear
p. 284 abstract
Effect of a Nonequilibrium Low-Temperature Plasma on the Structure of Fish Skin Leather
p. 288 abstract
Electrolytic-Plasma Processing of the Surface of an Aluminum Part Manufactured by an Additive Method
p. 291 abstract
Investigating the Effect of Plasma Treatment and Surfactants on Acid Dyeing of Rabbit Skins
p. 294 abstract
A Plasma-Electrolyte Method of Obtaining Thin-Walled Hollow Particles of Silicon Oxide
p. 298 abstract
Modeling of Liquid Flow in Plasma-Electrolyte Surface-Treatment Systems
p. 302 abstract
An Investigation of the Structure and Physiochemical Properties of 20X13 and 40X13 Steels after Exposure to Unbalanced Low-Temperature Plasma
p. 307 abstract
Features of the Plasma-Electrolyte Process in the Vapor Phase over a Solution of Liquid Glass
p. 310 abstract
Jet Electrical Discharge with a Liquid Plasma-Forming Medium in Interaction with Aluminum
p. 314 abstract
Key Processes in the Formation of Hollow SiO2 Particle in Plasma-Electrolytic Spraying
p. 317 abstract
Doping Oxide Films and Forming Oxynitride Films in a Stream of a Low-Temperature Nitrogen Plasma
p. 322 abstract
Intensification of Diffusion Processes Using HF Capacitive Discharge Plasma and an Active Urethane Penetrator in Fur Technology
p. 325 abstract
Treatment of the Plasma High-Frequency Capacitive (HFC) Discharge of the Carbon-Containing Gas as a Method of Imparting to the Textile Materials the Hydrophobic Properties
p. 329 abstract
Spraying of Liquid Electrolyte at the Plasma–Liquid Interface during Gas-Discharge Combustion
p. 332 abstract
The Influence of the Concentration of Liquid Glass Solution on the Formation of Hollow SiO2 Particles with Plasma-Electrolyte Spraying
p. 336 abstract
Intensifying the Microfiber Dyeing Process with Disperse Dyes by Plasma Modification
p. 340 abstract
Numerical Simulation of a Shock Tube with a Low-Pressure Chamber Filled with an Electrically Neutral and Electrically Charged Gas Suspension
p. 344 abstract
Studying the Effect of Parameters of a High-Frequency Inductive Discharge on the Size of Silicon Dioxide Particles during Processing
p. 347 abstract
Study on Current Sheet Distortion in Pulsed Plasma Thrusters
p. 351 abstract
Simulation and Optical Characterization of Single Point Diamond-Turned Metallic Mirrors for the TACTIC Telescope
p. 361 abstract
A Study of the Operation of a Self-Acting Valve with Structural Elastomeric Elements of Low-Speed Long-Stroke Compressor Stages
p. 370 abstract
Evaluation of the Quality of the Process of Controlling the Process of the Front Journal of the Intermediate Shaft with a Caliper Gauge during Repairs of a ZMZ Engine
p. 378 abstract
Evaluation of the Variability of Measurement Processes in Control of Wear of Crankshaft Jack Diameters
p. 382 abstract
On the Question of Modeling Particles of Bulk Media Using the Example of Formalizing Arrays of Seeds of Some Row Crops
p. 387 abstract