Contents

Surface Engineering and Applied Electrochemistry

Vol. 61, No. 4, 2025

Modification of Composite Oligomer in a Microwave Electromagnetic Field

S. G. Kalganova, Yu. A. Kadykova, A. S. Sivak, G. V. Sakhadzhi, and E. Yu. Vasinkina p. 413  abstract

Methods for Separating Cathode Material from Aluminum Foil of Lithium-Ion Batteries

S. I. Bagaev, A. A. Parshuto, I. P. Smyaglikov, E. A. Stepanova-Parshuto, E. A. Klimova, and V. N. Kohnyuk p. 421  abstract

About the Efficiency of Using Modern Technologies for the Formation of Hardened Coatings from Self-Fluxing Alloys in Combination of Gas Thermal Spraying and High-Frequency Current Melting

O. G. Devoino, I. I. Vegera, V. G. Zaleski, A. Yu. Rudnitskii, A. V. Gorbunov, and A. S. Volod’ko p. 427  abstract

Influence of Laser Treatment Parameters on the Stress State of Parts Made of Grey Cast Iron SCh20

O. G. Devoino, A. P. Pilipchuk, M. A. Kardapolova, I. M. Kosyakova, and A. S. Lapkovskii p. 441  abstract

Development of Induction Heating Systems in the Metallurgical Industry Using Digital Twin Technology

V. B. Demidovich p. 447  abstract

Mechanochemical Synthesis of G-Phases: Ni/Co–Ti–Si and Al–Ti–Fe/Co Systems

M. A. Eryomina, and S. F. Lomayeva p. 453  abstract

Formation of Optically Absorbing Coatings on Titanium by High-Voltage Electrochemical Oxidation

E. A. Klimova, A. A. Parshuto, E. A. Stepanova-Parshuto, I. P. Smyaglikov, S. I. Bagaev, V. N. Kokhnyuk, A. A. Izyumov, and E. V. Mochaylo p. 459  abstract

Morphology of the Surface of Natural Leather after Laser Exposure

T. Zh. Kodirov, A. P. Laskovnev, M. I. Markevich, A. G. Anisovich, V. I. Zhuravleva, and U. O. Khudanov p. 464  abstract

Effect of Deposition Modes on Micromechanical Properties of Nanostructured TiAlSiN and TiAlSiCN Coatings

S. V. Konstantinov, F. F. Komarov, I. V. Chizhov, and V. A. Zaikov p. 470  abstract

Formation of Molybdenum-Containing Layers by Induction-Thermal Vacuum Spraying

V. A. Koshuro, and A. A. Fomin p. 480  abstract

Study of the Process of Formation of Corrosion-Resistant Coatings of the Ti–Cu–N System Obtained by the Vacuum Arc Deposition Method for Medical Products

S. D. Latushkina, O. I. Posylkina, I. N. Zhoglik, and I. A. Sechko p. 486  abstract

Features of Chip Formation and Wear of Blades Made of Superhard Materials Based on CBN during Turning Hardened Steels

V. Ya. Lebedev, V. E. Babich, Yu. A. Ziziko, and N. V. Lebedev p. 492  abstract

Microdroplet Phase of Cathode Erosion of a Stationary Vacuum Arc

A. P. Laskovnev, V. G. Zaleski, G. V. Markov, A. A. Shegidevich, A. P. Ralko, and E. A. Azarkova p. 500  abstract

Structure of the Cathode Spot of a Vacuum Arc of Alloys

V. G. Zaleski, A. T. Volochko, G. V. Markov, A. P. Ralko, and Zh. E. Makarova p. 506  abstract

A Study of the Effect of Magnetic Field Pulse Duration on Residual Stress and Surface Hardness of 40Kh13, R6М5, and 40KhМFА Steels

A. N. Matyas, A. M. Milyukova, and A. A. Lyakh p. 511  abstract

The Criteria for Selecting a Hardening Treatment Mode for Ion Nitriders

M. N. Bosyakov, A. N. Moiseenko, and O. V. Silina p. 519  abstract

Increase in Durability of Adjustment Mechanisms of Boring Cutting Tools

N. N. Popok, E. M. Tikhon, V. A. Kukareko, and V. S. Anisimov p. 527  abstract

Reduction of Nonuniformity of the Magnetic Field of an Elongated Magnetron Sputtering System with a Rotating Cathode

V. M. Komarovskaya, A. S. Pologov, O. I. Tereshchuk, and I. A. Sechko p. 532  abstract

Optimization of the Process of Surfacing Coatings Based on Aluminum Alloys Using the Centrifugal Induction Method

M. A. Belotserkovsky, A. A. Kurilyonok, and I. A. Sosnovsky p. 540  abstract

Study of the Fe–Ni–C–Cr Electrochemical Coating Formation Process

S. V. Yakubovskaya, A. A. Korbit, and A. A. Bezhik p. 547  abstract

Elaborating the Theory of Cross Rolling and Theories of Metal Fracture under Plastic Flow

G. V. Kozhevnikova, V. Ya. Shchukin, and S. S. Dubienets p. 553  abstract

Methods of Processing High-Carbon Wire and Metal Cord with Straightening Devices

Yu. L. Bobarykin, Yu. V. Martyanov, and O. Yu. Khodosovskaya p. 560  abstract

Pressure on the Surface of a Well Casing Created by an Electrical Discharge in Water

V. M. Kosenkov p. 564  abstract

Towards the Identification of the Energy Source Used to Emit Acoustic and Electromagnetic Waves by an Oscillating Charged Drop

A. I. Grigoriev, N. Yu. Kolbneva, and S. O. Shiryaeva p. 572  abstract

Study of the Scattering Capacity of Sulfate Electrolyte for Electrolytic Plasma Polishing

S. A. Silkin p. 581  abstract

Features of Local Plasma Electrolytic Treatment of the Lateral Surface of a Rotating Cylinder

S. A. Kusmanov, S. Yu. Shadrin, I. V. Tambovskiy, T. L. Mukhacheva, T. M. Golubeva, N. L. Smirnova, and S. N. Grigoriev p. 586  abstract

Electrode Processes in Deep Eutectic Solvent Containing Dissolved Chromium(III) Chloride and Evaluation of Electrocatalytic Activity of Deposited Coatings

V. S. Protsenko, L. S. Bobrova, and F. I. Danilov p. 598  abstract