Vol. 55, No. 9, 2025

Steel in Translation

Investigation of the Microstructure and Hardness of 35Kh Steel after Simulated Hot Rolling with Various Controlled Cooling and Coiling Regimes

I. D. Pospelov and D. V. Matveeva p. 885 abstract

Features of Asymmetric Sheet Rolling in Rolls with Different Diameters

A. V. Kozhevnikov, A. V. Samoilov, and I. A. Kozhevnikova p. 890 abstract

Evaluation of Protective Properties of Polymer Coatings Based on Organosilicon Binder with Various Fillers

A. A. Emelyanov p. 893 abstract

Application of Galfenol in Fastening Units

G. Yu. Timofeeva, P. E. Demin, and A. V. Kosachev p. 898 abstract

On the Durability of Heat-Resistant Nickel Alloy EI607A during Long-Term Operation

I. N. Tsareva, L. A. Krivina, O. B. Berdnik, and E. N. Razov p. 905 abstract

Ceramic Antifriction Coatings for Bearing Matings of Internal Combustion Engine Turbochargers

A. G. Ipatov, K. G. Volkov, and A. V. Malinin p. 913 abstract

Development of a Mobile Plasma Unit for the Restoration of Worn Parts and Assemblies of Special Equipment

G. I. Trifonov, I. N. Kravchenko, Ya. V. Komarov, and S. N. Kuznetsov p. 918 abstract

Methods of Intensified Cleaning of Component Parts in Submerged Washing Machines

N. V. Korneev, I. N. Kravchenko, and V. M. Korneev p. 925 abstract

Method for Assessing the Dispersion Quality of Polymeric Composite Solutions

R. I. Li, M. R. Kiba, and V. E. Erokhin p. 930 abstract

Study of Viscoelastic Properties of Parts Made Using 3D Printing Methods with Various Ways of Structure Hardening

I. S. Dolgolenko, I. S. Nefelov, and A. Yu. Konoplin p. 936 abstract

Evaluation of Influence of Subzero Temperatures on Current-Carrying Properties of Adhesive Materials

T. V. Shramkov p. 940 abstract

Balance of Pulling Forces in Roll Piercing

B. A. Romantsev, M. M. Skripalenko, A. S. Budnikov, V. S. Yusupov, V. A. Andreev, and V. P. Kuznetsov p. 944 abstract

Behavioral Features of a Multicomponent Hypereutectic Aluminum Alloy under Hot Three-High Radial-Shear Rolling

S. O. Rogachev, V. A. Andreev, E. A. Naumova, M. M. Skripalenko, and V. A. Shcherbakov p. 948 abstract

A Study of Titanium Alloy Broadening Peculiarities during Hot Rolling. Paper 1. α + β Alloys

A. Yu. Postylyakov, O. V. Kruchinina Vodopyanova, D. L. Shvarts, A. M. Mikhailenko, and A. A. Koksharov p. 957 abstract

Comparative Analysis of Cold Rolling Mills 2030 and 1770

D. S. Polunin, S. M. Belsky, and I. I. Shopin p. 964 abstract

Metal Heat Treatment in Rolling Shops at PJSC NLMK Aimed at Achieving Preset Properties: A Review

D. Yu. Pozharenko and S. M. Bel’skii p. 968 abstract

Modeling and Experimental Testing of VT1-0 and PT-7M Titanium Alloy Tube Rolling Technology on a 70-270 Tube Mill

V. A. Lakiza, Yu. V. Gamin, A. S. Aleshchenko, A. V. Korol, and A. L. Yakovlev p. 971 abstract

Study of Hardness and Structural Features of Hot-Rolled Chromium Vanadium Structural Steel after Cyclic Spheroidizing Annealing

I. D. Pospelov and D. V. Matveeva p. 978 abstract

Analysis of the Cooling of Two-Phase Titanium Alloys: Finite Element Modeling and Experiment

A. Mahmoud Alhaj Ali, A. N. Khakimova, D. A. Zlobin, and A. A. Kondrat’eva p. 985 abstract

Effect of Hydrogen on the Mechanical Properties of a Thin Strip of High-Entropy Fe–Cr–Co–Ni–Mn Alloy

A. Yu. Ivannikov, S. V. Gorbunov, M. A. Kaplan, R. D. Karelin, and V. S. Yusupov p. 992 abstract

Study of the Possibility of Improving the Microstructure of Metal during Hot Rolling of Steel 20 Sheets

A. M. Pesin, D. O. Pustovoitov, L. V. Nosov, I. A. Pesin, O. D. Biryukova, and A. M. Baryshnikova p. 996 abstract

A Review of Research in the Field of Analysis of Thermal Parameters of Steel Strip and Rolls during Cold Rolling

A. V. Kozhevnikov, D. L. Shalaevskii, I. A. Kozhevnikova, and S. V. Zhilenko p. 1001 abstract