Contents

Steel in Translation

Vol. 56, No. 6, 2026

Improving the Ductility of Non‑Ageing High‑Strength IF Steel for Automotive Applications by Annealing in Bell Furnaces

O. M. Gubanov, R. R. Adigamov, and V. S. Yusupov p. 503  abstract

Influence of Accounting for the Roll’s Elastic Deformation on the Grip Arc Length and Normal Contact Stresses during the Strip’ Cold Rolling

K. V. Ilin, G. L. Baranov, and E. Yu. Raskatov p. 513  abstract

The Effect of Materials on the Coefficient of Friction during Hot Deformation

A. V. Vydrin, A. V. Krasikov, B. N. Eremin, and V. I. Kuznetsov p. 519  abstract

Anticorrosive Oil Compositions Based on Combined Corrosion Inhibitors

L. G. Knyazeva, L. E. Tsygankova, N. A. Kur’yato, A. V. Dorokhov, and V. A. Kur’yato p. 523  abstract

The Effect of Gallium, Indium, and Thallium on the Anodic Behavior of E-AlMgSi Aluminum Conductor Alloy (Aldrey) in a Neutral NaCl Solution

I. N. Ganiev, F. A. Aliev, R. D. Ismonov, A. M. Safarov, and Dzh. Kh. Dzhayloev p. 531  abstract

Anti-Corrosion Protection of Steel with a Superhydrophobic Nickel-Based Coating

L. D. Rodionova, L. E. Tsygankova, and A. A. Uryadnikov p. 537  abstract

Determination of Operating Parameters during Restoration or Manufacture of Pipeline Fittings

V. A. Scriabin, N. V. Sorokina, and S. A. Gusev p. 543  abstract

Application of ARInZ© to Improve the Selection of a BelAZ Axle Shaft Housing Part Blank

S. L. Gorobchenko, V. B. Smirnov, I. V. Grigoriev, M. V. Taraban, N. A. Vokhmyanin, and E. A. Tikhonov p. 549  abstract

Using Coercivity Measurement in Assigning Parts to Restore Steel Life

A. B. Maksimov and A. V. Gadeev p. 560  abstract

Theoretical Studies of Tool Life Used for Applying Chrome Composite Coatings

S. Yu. Zhachkin, G. I. Trifonov, and V. I. Ivanchura p. 565  abstract

Investigation of the Effect of Corundum Content in a Protective Coating on Its Corrosion and Performance Properties

V. A. Markov, V. V. Trubnikov, S. V. Ganin, S. A. Blinov, A. M. Levitskii, E. A. Tikhonov, and O. A. Kunitskaya p. 569  abstract

Methods for Recycling Components of Road Vehicles Made from Polymer Composite Materials (Review)

V. V. Nekrasov and N. I. Baurova p. 575  abstract

Effect of Heat Treatment on the Wear Resistance of Low‑Alloy Steels

S. M. Gaidar, S. M. Vetrova, A. S. Barchukova, and A. M. Pikina p. 581  abstract

Analysis and Assessment of the Role of Ultrafine Filler Particles on the Performance Characteristics of Electrochemical Coatings Based on Chromium and Copper

V. N. Gadalov, O. M. Gubanov, I. V. Vornacheva, S. A. Voinash, I. N. Gar’kin, V. A. Sokolova, and O. A. Kunitskaya p. 587  abstract

Application of Polymer Composite Materials with Various Types of Fillers for the Manufacture of Hybrid Vehicle Structural Members

D. A. Kharitonov and N. I. Baurova p. 596  abstract

Development of the Design and Manufacturing Technology of a Tool for UltraJet Dispersion of Suspensions Based on Selective Laser Melting Technology

A. L. Galinovskii, E. S. Ivanova, A. S. Filimonov, E. S. Alekperov, and A. A. Baurov p. 601  abstract

Modernization of CNC Milling Machines

V. A. Scriabin p. 608  abstract