Contents
Steel in Translation


Vol. 39, No. 4, 2009

Simultaneous English language translation of the journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Steel in Translation ISSN 0967-0912.


Influence of the Initial Granulometric Composition
of Solid Fuel on Its Final Size in Sintering

A. A. Odintsov and V. A. Dolinskii p. 289  abstract

Powder Injection into Slag in a Converter

E. V. Protopopov, T. R. Galiullin, A. G. Chernyatevich, and P. S. Kharlashin p. 295  abstract

Stamping Axisymmetric Forgings

V. N. Peretyat’ko, A. V. Bakhaev, M. V. Filippova, and S. A. Vakhman p. 300  abstract

Formation of the Fine Structure and Phase Composition
of Structural Steel on Quenching

Yu. F. Ivanov, Yu. A. Kolubaeva, E. V. Kornet, and V. E. Gromov p. 302  abstract

Improving the Weldability of T1 Electrosteel Rail

A. B. Yur’ev, L. A. Godik, R. F. Nugumanov, and L. V. Korneva p. 307  abstract

Ore Enrichment Required for a Self-Organizing Jet-Emulsion Reactor

V. P. Tsymbal, S. P. Mochalov, M. S. Parovinchak,
I. A. Rybenko, and M. S. Kudoyarov
p. 310  abstract

Processing Wastes from Manganese-Alloy Production

O. I. Nokhrina, I. E. Proshunin, and I. D. Rozhikhina p. 314  abstract

Variation in Coke Properties within the Blast-Furnace Shop

E. N. Stepanov, I. I. Mel’nikov, V. P. Gridasov, and A. A. Stepanova p. 317  abstract

Influence of the Chemical Composition and Properties
of Iron Ore on the Coating Formation at the Furnace Wall

B. I. Bol’shakov, A. S. Nesterov, N. M. Mozharenko,
V. N. Loginov, and M. A. Gurkin
p. 321  abstract

Rational Ladle Treatment for Desulfurization of Hot Metal

V. I. Bol’shakov, A. F. Shevchenko, Lu Dun Ye, V. A. Aleksandrov,
Sun Ten Sen, A. M. Bashmakov, and E. A. Trotsenko
p. 326  abstract

Slag-Forming Mixtures for Nonsteady Casting
on a Continuous Bar-Casting Machine

D. B. Foigt, A. V. Shukan, A. N. Ivanov, and V. G. Vyachkin p. 334  abstract

Behavior of the Central Bath Region when Smelting Carbon
Ferrochrome in a Ferroalloy Furnace

A. I. Pashkeev, I. Yu. Pashkeev, and G. G. Mikhailov p. 336  abstract

Increasing the Productivity of Continuous Broad-Strip Hot-Rolling Mills
and Improving Strip Quality

V. N. Khloponin, S. A. Afanas’ev, and A. N. Tinigin p. 341  abstract

Improvement of Pipe, Strip, and Profile Production
on the Basis of the Theory of Pilger Rolling

B. N. Matveev p. 345  abstract

Production of High-Strength Reinforcing Wire with a Periodic Profile

V. P. Rudakov, E. A. Pudov, N. V. Litvinova, and A. A. D’yachkova p. 349  abstract

Introducing an Oil–Air Lubrication System at a Continuous-Casting Machine

E. A. Dudorov, A. I. Ruzanov, and Yu. V. Zhirkin p. 351  abstract

Universal Steels for Hot-Deformation Tools

E. I. Ponkratin, D. V. Lenartovich, and A. B. Steblov p. 355  abstract

Production of Cold-Resistant Reinforcement 10–40

O. Yu. Efimov, V. Ya. Chinokalov, E. G. Belov,
E. A. Ivanov, and N. V. Myskova
p. 359  abstract

Modifying Continuous-Cast Steel with Refractory Nanopowder

V. P. Komshukov, D. B. Foigt, A. N. Cherepanov, and A. V. Amelin p. 363  abstract

Processing Alumina-Bearing Ferroalloy Slags

L. I. Leont’ev, V. M. Rytvin, S. I. Gil’varg,
V. A. Perepelitsyn, and V. A. Rovnushkin
p. 366  abstract


Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.