Contents
Steel in Translation

Vol. 39, No. 3, 2009

Simultaneous English language translation of the journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Steel in Translation ISSN 0967-0912.

Behavior of Phosphorus in the Blast Furnace in Smelting Hot Metal and Ferromanganese

L. A. Polulyakh, V. Ya. Dashevskii, A. Ya. Travyanov, Yu. S. Yusfin, and A. L. Petelin p. 187  abstract

Stress State in Nonuniform Tensile Deformation of a Multilayer Cylindrical Sample

G. N. Gur’yanov p. 190  abstract

Thinning of the Walls of Rolled Profiles

L. S. Kokhan, I. G. Roberov, Yu. A. Morozov, and A. V. Borisov p. 194  abstract

Improved Calculation of the Deformational and Rate Parameters
in Pipe Rolling on a Continuous Mill

B. A. Romantsev, A. V. Goncharuk, E. A. Davydova, I. I. Lube, and E. V. Stoppe p. 197  abstract

Calculating the Blan’s Parameters in the Production of Large-Diameter Pipe

S. V. Samusev and A. V. Lyuskin p. 200  abstract

Carbon Supersaturation of Widmanstatten Ferrite

E. Yu. Karpova, L. V. Kostyleva, and V. A. Il’inskii p. 203  abstract

Coherent Self-Sustaining Waste Processing by Means of a 25-MW Mini Cogeneration Plant

L. A. Shul’ts and A. G. Ershov p. 207  abstract

Wind Distribution of Pollutants from Metallurgical Enterprises

N. M. Durov, V. V. Korovushkin, G. S. Podgorodetskii, and Yu. S. Yusfin p. 217  abstract

Economic Analysis of the Combined Blast

F. N. Moskalina p. 222  abstract

Improving Converter-Steel Production at OAO ZSMK

V. P. Komshukov, V. V. Sokolov, V. M. Mashinskii, A. I. Shchipanov, and B. E. Yanak p. 227  abstract

Distribution System for Steel Fluxes in the Intermediate Ladle

S. N. Ushakov, A. A. Khomenko, K. N. Vdovin, and V. V. Tochilkin p. 229  abstract

Efficient Production Technology for High-Purity Low-Alloy Steel Used
in Special-Purpose Thick Sheet

A. N. Lutsenko, V. G. Ordin, A. G. Eroshkin, A. V. Kuklev, V. V. Tinyakov, and B. Ya. Baldaev p. 235  abstract

Slag Conditions in Arc Furnaces

V. A. Bigeev, A. E. Malofeev, A. V. Panteleev, O. A. Nikolaev, and Yu. A. Ivin p. 238  abstract

Optimizing the Oxygen Content in Rail Steel

L. A. Godik, N. A. Kozyrev, and L. V. Korneva p. 240  abstract

Production of Manganese Alloys from Rich High-Basicity Ore

V. P. Vorob’ev, A. D. Godunov, and A. V. Ignat’ev p. 243  abstract

Solid-Phase Reduction of Rai-Iz Chromium Ores by Heating with Carbon

K. I. Nevraeva, I. Yu. Pashkeeva, and G. G. Mikhailov p. 248  abstract

Automatic Control of Strip Planarity and Temperature by Contactless Methods

I. Yu. Prikhod’ko, P. P. Chernov, V. V. Raznosilin, A. A. Sergeenko, S. V. Trusillo,
V. A. Agureev, A. I. Sobolev, E. A. Parsenyuk, and Yu. A. Tsukanov p. 251  abstract

Progress in the Production of Seamless and Welded Pipe

B. A. Romantsev, A. P. Kolikov, and S. V. Samusev p. 257  abstract

Evaluating the Piercing Conditions for 12X18H10T Blanks in 140 Mills
on the Basis of Cyclic-Shaping Data

R. M. Golubchik, D. V. Merkulov, E. D. Klempert, E. K. Medvedev, and S. V. Titova p. 262  abstract

Production of Fuel Lines for Diesel Engines

A. M. Antimonov and A. A. Bersenev p. 267  abstract

Influence of Final Alternating Flexure on the Mechanical Properties
of Cold-Drawn Reinforcement

E. M. Kireev, M. N. Shulyak, and A. V. Stolyarov p. 270  abstract

Metallurgical System for Reinforcement and Wire-Rod Production

E. Kh. Shakhpazov, V. M. Parshin, M. N. Shulyak, A. V. Stolyarov, and G. S. Nikitin p. 273  abstract

Thermostability of Nitrided Layer on Die Steels

E. I. Ponkratin, D. V. Lenartovich, and A. B. Steblov p. 277  abstract

Influence of Normalization in Dome Furnaces on the Properties
of Isotropic Electrical-Engineering Steel with ~3% Si

A. A. Uvarkin, A. A. Zaveryukha, I. P. Gorbunov, M. Yu. Polyakov, and S. V. Bakhtin p. 280  abstract

Tests of New Purification System for Blast-Furnace Gas

D. V. Stalinskii, G. M. Kanenko, and V. V. Alkhasova p. 284  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.