Contents
Steel in Translation

Vol. 37, No. 3, 2007

Simultaneous English language translation of the journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Steel in Translation ISSN 0967-0912.

In Memory of V.P. Elyutin (1907–2007) p. 187

Bath Hydrodynamics with Gas Injection in a Ladle–Furnace Unit:
Physical Modeling

S. A. Pis’menov, D. Ya. Povolotskii, and A. A. Ustyugov p. 189  abstract

Crystal-Chemical Stabilization of Dicalcium Silicate

D. V. Lopatin and V. M. Chizhikova p. 191  abstract

Confirmation of Mineral Formation in Slurry Storage

Yu. S. Yusfin, P. I. Chernousov, and M. V. Ushakova p. 196  abstract

Heat Transfer of Slab with Mold Wall in Continuous-Casting Machine

S. V. Lukin, N. I. Shestakov, and T. I. Strashko p. 198  abstract

Vacuum Treatment of Steel in Ladle

Z. K. Kabakov, P. Z. Kabakov, and L. V. Kuznetsov p. 202  abstract

Forces in Asymmetric Rolling

V. A. Nikolaev p. 205  abstract

Temperature Field of an Infinite Plate at Small Fourier Numbers

A. K. Sokolov p. 208  abstract

Temperature Distribution in Pipe Rolling on a System with a Pilger Mill

N. I. Fartushnyi, B. A. Romantsev, P. A. Alekseev, A. V. Goncharuk,
and R. N. Fartushnyi p. 214  abstract

Melting of Steel Scrap in Hot Metal

S. A. Krupennikov and Yu. P. Filimonov p. 217  abstract

Extending the Life of Cast Excavator Parts in Northern Climates

Yu. P. Solntsev, A. E. Serditov, and V. V. Lebedev p. 220  abstract

Electrodeposition and Properties of Composite Coatings
with Nanocomponents

V. V. Rudneva and G. V. Galeskii p. 224  abstract

Influence of the Chemical Composition on the Structure Formation
and Properties of Temperature- and Wear-Resistant Cast Iron

V. M. Kolokol’tsev, E. V. Petrochenko, and O. A. Mironov p. 229  abstract

Role of Carbon in the Crystallization of Duplex Steels
and the Solidification of Their Ingots

Z. Stradomski, D. Dyja, and A. M. Galkin p. 234  abstract

Optimal Control of Circulatory Vacuum Treatment

E. N. Ishmet’ev, S. M. Andreev, B. N. Parsunkin, and Z. G. Salikhov p. 238  abstract

Profitability Analysis of Markets for Metal Products
to Improve Marketing Policies

A. L. Khotomlyanskii, S. I. Savchuk, and T. N. Chernata p. 242  abstract

Key Factors in the Success of Large Corporate Structures

Yu. M. Tsygalov p. 245  abstract

Simulation of Social Costs and Corresponding Sources
of Financing in City (Regional) Budgets

N. A. Kharitonova, E. N. Kharitonova, and N. L. Levinson p. 248  abstract

Influence of Rolling on the Micromechanical Properties
of Titanium–Steel Composites

Yu. P. Trykov, O. V. Slautin, and S. A. Abramenko p. 252  abstract

Complex Titanium-Based Coatings on 8 and T15K6 Hard Alloys

V. G. Khishnyak, A. B. Bobin, and O. S. Serbul p. 253  abstract

Determining the Strain Resistance by Means of Conical Indentors

D. A. Konovalov, S. V. Smirnov, and D. I. Vichuzhanin p. 255  abstract

Loading Units for Sintering Machines

B. S. Tleugabulov p. 256  abstract

Reducing the Cost of Hot Metal

N. N. Kopot’, S. N. Evstyugin, V. A. Gorbachev, S. V. Shavrin^†,
J. Becerra, and P. Duarte p. 261  abstract

Russian Experience with Coatings on Copper Slab-Mold Walls

A. V. Kuklev, Yu. M. Aizin, A. A. Makrushin, A. V. Gudkov,
and E. Yu. Serebryakov p. 264  abstract

Improving Protective Slag-Forming Mixtures for Intermediate Ladles
of Continuous-Casting Machines

A. M. Toptygin, E. G. Polozov, Yu. M. Aizin, and I. V. Neklyudov p. 266  abstract

Proceedings of the Ninth Congress of Steel-Smelting Specialists p. 271  abstract

Using OOO Gruppa Magnezit Refractories in Steel Smelting

M. A. Chashkin, L. M. Aksel’rod, A. P. Laptev, Yu. F. Chunikhin,
S. I. Ivannitsa, D. S. Yakshuk, and M. G. Dzhundiet p. 280  abstract

Global and Russian Ferroalloy Production

L. I. Leont’ev, V. I. Zhuchkov, L. A. Smirnov, and V. Ya. Dashevskii p. 283  abstract

Electroerosive Machining of the Working Rollers for Trimming Auto-Industry Steel Sheet

Yu. A. Bodyaev, A. V. Gorbunov, A. F. Radionov, V. K. Belov,
D. O. Begletsov, and E. V. Gubarev p. 288  abstract

Development of Pipe Production in 2006

V. M. Lavrishchev and L. A. Kondratov p. 296  abstract

Obtaining the Required Range of Continuous-Cast Pipe Blanks for Piercing

S. G. Chikalov, E. D. Klempert, R. M. Golubchik, D. V. Merkulov,
and M. V. Novikov p. 305  abstract

Controlled Cooling of Strip Within a Coil and Its Influence
on Fine-Structure Formation

V. V. Chashchin, A. V. Kuklev, E. S. Popov, and V. I. Slavov p. 309  abstract

Selecting a Thermal-Hardening Technology For Rails

V. V. Pavlov, L. V. Korneva, and N. A. Kozyrev p. 313  abstract

Isothermal Deformation of High-Strength Materials

A. K. Davydov, S. A. Kononov, A. I. Baturin, and V. N. Chernyshev p. 316  abstract

New Approaches to Purification of Blast-Furnace Gas

I. E. Sperkach p. 320  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.