Contents
Steel in Translation

Vol. 37, No. 2, 2007

Simultaneous English language translation of the journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Steel in Translation ISSN 0967-0912.

Equilibrium Composition of Metal and Slag in Reductive Smelting
of Binary Batch Based on Chineisk and Korshunovo Concentrates

Yu. A. Deryabin p. 83  abstract

Standard Entropy of Crystalline Aluminum Oxides Al₂O, AlO, Al₃O₄

A. G. Ryabukhin and A. V. Roshchin p. 89  abstract

Thermodynamic Andgas-Dynamic Aspects of the Guniting of Converter Linings

E. N. Sigarev, A. G. Chernyatevich, and E. A. Chubina p. 92  abstract

X-ray Analysis of the Technological Quality of Silicocalcium

G. L. Borshchevskaya, G. M. Tirakov, V. I. Dmitrienko, and R. A. Gizatulin p. 99  abstract

Thermodynamic Properties of Aluminum and Iron Compounds

N. F. Yakushevich and I. V. Chuzhinova p. 101  abstract

Electroexplosive Boron–Aluminum Coating of Iron:
Phase Composition and Defect Substructure

O. A. Tsvirkun, Yu. F. Ivanov, E. A. Budovskikh, and V. E. Gromov p. 106  abstract

Influence of Tempering on the Phase Composition
of Cast Moderately Alloyed Structural Steel

O. V. Tikhon’kova, N. A. Popova, V. V. Tsellermaer, V. E. Gromov, and E. V. Kozlov p. 110  abstract

Thermal Characteristics of Three-Jet Plasma Reactor

V. V. Rudneva, G. V. Galevskii, S. G. Galevskii, and E. K. Yurkova p. 115  abstract

Express Quality Analysis of Coal Concentrates by Diffuse Reflection IR Spectroscopy

V. N. Egorov, I. I. Mel’nikov, N. A. Tarasov, V. I. Butakova, and Yu. M. Posokhov p. 119  abstract

Sintering with Variation in the Proportion of SSGPO Concentrate

M. F. Gibadulin, V. A. Gostenin, K. V. Sen’kin, S. K. Sibagatullin, and V. Yu. Savinov p. 122  abstract

Mechanism of Mineral Formation and Metallurgical Properties
of Sinter of Basicity 1.1–3.1 at OAO MMK

T. Ya. Malysheva, Yu. S. Yusfin, N. R. Mansurova, M. F. Gibadulin, and V. P. Lekin p. 126  abstract

Furnaces and Air Heaters in Blast Furnace Shop at OAO MMK

V. M. Parshakov, Yu. V. Yakovlev, G. P. Lezhnev, P. F. Fedotov, and V. A. Zabolotskikh p. 131  abstract

Reconstructing the Vacuum-treatment System in the Oxygen-converter Shop at OAO MMK

Yu. A. Bodyaev, V. M. Korneev, D. N. Chigasov, M. V. Burzaikin, and S. A. Samoilin p. 139  abstract

Evaluating the Microstructure of Continuous-Cast Bar Billet in the Electrosmelting Shop

A. F. Sarychev, D. V. Yurechko, V. G. Suspitsin, E. M. Shmeleva, and A. G. Alekseev p. 144  abstract

Converter Linings That Last for More Than 5000 Melts

V. F. D’yachenko, I. M. Zakharov, V. G. Ovsyannikov,
T. K. Prishchepova, and O. B. Voronina p. 146  abstract

Improvements in Steel Smelting at OAO MMK: the New Electrosmelting Shop

V. F. Rashnikov, R. S. Takhautdinov, A. V. Sarychev, Yu. A. Ivin, and N. V. Saranchuk p. 149  abstract

Radical Reconstruction of Bar Production at OAO MMK

V. F. Rashnikov, G. S. Senichev, A. V. Gasilin, O. P. Shiryaev, and V. G. Loginov p. 152  abstract

Calculating the Cooling of Steel Strip on the Exit Conveyer

G. S. Senichev, G. A. Medvedev, S. V. Denisov, and A. G. Medvedev p. 158  abstract

Continuous Nondestructive Monitoring of Galvanized Strip in the Hot-Galvanization Line

L. S. Ivanova, V. I. Belyakova, V. L. Kornilov, V. Yu. Bozhevalev, and F. V. Kaptsan p. 161  abstract

New Production System for Precision Hexahedral Rod

V. S. Slavin, S. M. Vershigora, and V. S. Panteleev p. 164  abstract

The Quantum Materials Science of Steel

V. F. Rashnikov, A. A. Morozov, V. N. Urtsev, and Yu. N. Gornostyrev p. 167  abstract

Producing Steel of Strength Classes K55 and K56 (Thickness up to 13 mm)

S. V. Denisov, E. A. Kudryakov, A. V. Titov, I. V. Kazakov, and G. N. Posazhennikov p. 170  abstract

Optimizing and Standardizing the Annealing of Cold-rolled 65 Steel Strip

Yu. P. Demidchenko, V. D. Naumenko, G. A. Kunitsyn,
V. L. Kornilov, and S. F. Parshikov p. 173  abstract

Quality Certification of Cold-Rolled 08 Strip

E. D. Zaletova, E. B. Yakovleva, L. S. Ivanova, V. V. Yashin, and S. F. Parshikov p. 176  abstract

Evaluating the Quality of New Microalloy Steel for Large-diameter Pipe

Yu. A. Bodyaev, O. A. Nikolaev, V. L. Kornilov, Yu. D. Morozov,
I. I. Lube, S. V. Denisov, and V. V. Frolov p. 180  abstract

Production of Tin Plate with New Coatings

O. Yu. Sidorova, O. A. Orlova, A. V. Papshev, A. L. Raspopov, and V. P. Vinogradov p. 185  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.