Contents
Steel in Translation


Vol. 39, No. 1, 2009

Simultaneous English language translation of the journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Steel in Translation ISSN 0967-0912.


Influence of the Cooling Rate on the Restructuring of Metal Melt

A. M. Skrebtsov, G. A. Ivanov, Yu. D. Kuz’min, and E. G. Bozhkova p. 1  abstract

Calculating the Geometry of the Pipe Blank in Shaping

S. V. Samusev and A. V. Lyuskin p. 4  abstract

Rational Configuration of Finishing Group and Winding Unit
for a Continuous Broad-Strip Mill

A. V. Aldunin p. 7  abstract

Stamping Complex Surfaces by Rolling

I. G. Roberov, L. S. Kokhan, Yu. A. Morozov, and A. V. Borisov p. 11  abstract

Improving the Properties of a Gas-Thermal Coating by Brushing

A. G. Radyuk, A. E. Titlyanov, and D. P. Kuzuev p. 15  abstract

Short-Term Creep in Electrical-Engineering Steel

S. V. Smirnov, L. M. Zamaraev, and P. P. Matafonov p. 17  abstract

Continuous Automatic Monitoring of the Coating and Lining of Rotating Furnaces

Z. G. Salikhov, R. T. Gazimov, and M. V. Shubin p. 19  abstract

Gas Emissions of Metallurgical Enterprises in Industrial Regions

K. V. Vishnyakova, A. L. Petelin, and Yu. S. Yusfin p. 25  abstract

Wear of Lurgi-552 Gratings when Roasting Pellets with Alkaline Bentonite Binder

M. I. Gasik, A. D. Uchitel, A. N. Panchenko, V. V. Khmel, and E. D. Solov’ev p. 28  abstract

Influence of the Softening and Melting Zone on Blast-Furnace Smelting

I. G. Tovarovskii, V. I. Bol’shakov, D. N. Togobitskaya, and A. F. Khamkhot’ko p. 34  abstract

Stabilizing the Composition of Blast-Furnace Products from Titanomagnetites
with a Nonconical Loading Trough

K. B. Pykhteeva, S. A. Zagainov, B. S. Tleugabulov, V. V. Filippov,
F. P. Nikolaev, and V. V. Belov
p. 45  abstract

Heat-Insulating Properties of Slag Mixtures for the Intermediate Ladle

V. A. Kapitanov, A. V. Kuklev, E. G. Polozov, and A. M. Toptygin p. 50  abstract

Conducting Mold for Electroslag Surfacing of Plane Blanks

Yu. M. Kuskov and K. A. Tsykulenko p. 53  abstract

The Electrosmelting of Steel: An Overview

V. M. Safonov and A. N. Smirnov p. 59  abstract

Optimal Electrical Conditions in Smelting Ferrosilicomanganese

V. S. Kutsin, V. A. Gladkikh, S. N. Kuz’menko, A. V. Nikolenko,
V. I. Zhurbenko, V. F. Lysenko, and V. I. Pogorelyi
p. 64  abstract

More Efficient Production of Small-Batch Ferroalloys and Complex Alloys

S. I. Gil’varg, N. V. Kuz’min, Yu. B. Mal’tsev, I. V. Shaderkin, and L. I. Leont’ev p. 67  abstract

Lubricant Supply and Frictional Coefficient in Rolling

V. L. Mazur and S. V. Mazur p. 69  abstract

Quality of Seamless Hot-Rolled Pipe, Taking Account of Mandrel Oscillations

V. N. Danchenko and S. R. Rakhmanov p. 72  abstract

Production of Cold-Deformed Pipe for Power-Industry Machinery

A. A. Tereshchenko, A. P. Golovchenko, V. S. Dekhtyarev, and Ya. V. Frolov p. 76  abstract

Deformation and Thermohardening of Reinforcement for Ferroconcrete Crossties

A. G. Korchunov p. 80  abstract

Extending the Life of Disk Cutters for Thick Strip

E. A. Mazhirin, N. A. Chichenev, and V. D. Zadorozhnyi p. 84  abstract

New Thermostable Steels for Hot Dies

E. I. Ponkratin, D. V. Lenartovich, and A. B. Steblov p. 86  abstract

Acceleration of Iron-Powder Sintering by Nickel Nanoparticles

A. G. Meilakh p. 90  abstract

Processing Slag from Ferroalloy Production

L. A. Smirnov, A. A. Grabeklis, and B. L. Demin p. 93  abstract


Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.