Contents
Steel in Translation


Vol. 39, No. 10, 2009

Simultaneous English language translation of the journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Steel in Translation ISSN 0967-0912.


Assessing the Quality of Iron-Ore Sinter on the Basis of Its Chemical Composition

I. S. Bersenev, V. I. Klein, V. I. Matyukhin, and Yu. G. Yaroshenko p. 843  abstract

Automatic Monitoring of Slag Composition during Steel Treatment in a Ladle–Furnace Unit

I. V. Nekrasov, O. Yu. Sheshukov, A. V. Sysolin, V. T. Lutsenko, and V. N. Bondarenko p. 847  abstract

Localization of Plastic Deformation of Quenched Structural Steel

E. V. Kornet, Yu. F. Ivanov, and V. E. Gromov p. 851  abstract

Thermal-Mass Coefficient in Nonsteady Heat Conduction

A. D. Gorbunov p. 854  abstract

Influence of Structural Scale and Pulsed Current on the Mechanical Behavior
of TiNi Alloy with Shape Memory

V. V. Stolyarov p. 858  abstract

Structural Diagnostics of Amorphous, Nanocrystalline, and Submicrocrystalline
Magnetically Soft Materials

N. I. Noskova and A. G. Lavrent’ev p. 863  abstract

Structure and Microhardness of Plasma Coatings Hardened by Nanoparticles
after Electrochemical Treatment

V. P. Bagmutov, V. I. Kalita, I. N. Zakharov, A. Yu. Ivannikov, and E. B. Zakharova p. 870  abstract

Using Coke Fines in the Blast Furnaces at OAO MMK

S. N. Pishnograev, A. V. Chevychelov, V. A. Gostenin, N. S. Shtafienko, and V. P. Gridasov p. 878  abstract

Factors That Influence CSR and CRI

E. N. Stepanov, D. A. Mezin, O. A. Shashkov, I. I. Mel’nikov,
A. Yu. Roslyi, and O. V. Chuikina
p. 882  abstract

Multipoint Thermal-Probe Monitoring the Radial Gas Distribution
in Blast Furnaces with Nonconical Charging Systems at OAO MMK

V. M. Parshakov, R. S. Takhautdinov, Yu. A. Bodyaev, M. F. Gibadullin,
L. S. Kanin, A. V. Chevychelov, A. A. Polinov, and S. A. Zakharov
p. 886  abstract

Transition Section in Continuous Bar Casting during the Serial Casting of Different Steels

A. B. Velikii, D. V. Yurechko, A. M. Stolyarov, A. G. Alekseev, and V. V. Moshkunov p. 890  abstract

Formation of Flaws on Account of Nonmetallic Inclusions in the Slabs during Rolling

E. P. Lozovskii, S. N. Ushakov, D. V. Yurechko, T. S. Masal’skii, and A. V. Filippov p. 893  abstract

Microalloying of Steel with Boron and the Development of Ferrotitanium Boride

I. R. Manashev, I. M. Shatokhin, M. Kh. Ziatdinov, and V. A. Bigeev p. 896  abstract

Assessing Channel Rolling on a 450 Mill

D. V. Nazarov, E. A. Zakharov, S. V. Denisov, A. B. Moller, and K. A. Zav’yalov p. 901  abstract

Rational Controlled Rolling on a 5000 Pipe-Blank Mill at Reduced Temperature

V. M. Salganik, A. V. Shmakov, and V. V. Popov p. 906  abstract

Efficient Deformation in the Roughing Group of the 2000 Mill

M. A. Molostov, P. A. Stekanov, S. V. Dubovskii, V. M. Salganik,
A. M. Pesin, and D. O. Pustovoitov
p.912  abstract

Production of >16-mm Strip after Reconstruction of the 2000 Mill

P. A. Stekanov, I. V. Kazakov, V. V. Savenkov, V. M. Salganik,
A. M. Pesin, and D. O. Pustovoitov
p. 915  abstract

Production of Cold-Rolled Sheet of Increased Strength

A. V. Gorbunov, T. M. Kochneva, N. I. Malova, T. P. Polenkova, and R. G. Selivanov p. 918  abstract

Ongoing Control of the Transverse Thickness Fluctuation of Cold-Rolled High-Strength Strip

G. A. Kunitsyn, E. M. Golubchik, and P. N. Smirnov p. 920  abstract

Production of Superthin Tinplate by One-Time Rolling

V. V. Galkin, S. V. Denisov, O. N. Moleva, R. V. Faizulina, and A. A. Gofman p. 925  abstract

Large-Diameter Gas Pipe Produced at OAO Volzhskii Trubnyi Zavod

V. I. Stolyarov, I. Yu. Pyshmintsev, I. O. Struin, and I. L. Permyakov p. 927  abstract

Helical Rolling of Nonhollow Blank

B. I. Tartakovskii p. 930  abstract

Parkerizing Steel with Preliminary Surface Activation

O. A. Gul’tsina, A. A. Sokolov, E. V. Dyul’dina, and S. P. Klochkovskii p. 933  abstract

Promising Steel Sheet for the Auto and Construction Industries

A. D. Nosov, S. V. Denisov, A. V. Gorbunov, A. G. Vetrenko,
A. I. Shpak, and E. V. Zharkov
p. 935  abstract

Production of Coiled Pipe-Steel Sheet of Improved Reliability on the 2000 Mill

S. V. Denisov, M. A. Molostov, P. A. Stekanov, V. V. Kurban, and I. S. Vasil’ev p. 939  abstract

Improving the Annealing of Cold-Rolled 65frame0 Steel to Comply
with the ISO/TU 16949:2002 Standard

E. D. Zaletova, E. B. Yakovleva, V. V. Yashin, and D. V. Ektov p. 942  abstract

Correlation between the Readings of an IMPOK Instrument and Galvanization Parameters

L. S. Ivanova, I. Yu. Nadeina, and V. L. Kornilov p. 945  abstract

Improving the Wear Resistance of Hard-Alloy Rolling Disks by Pulsed-Plasma Treatment

Yu. N. Tyurin, S. N. Kul’kov, and O. V. Kolisnichenko p. 948  abstract

Monitoring the Activity of Claus Catalysts in the Byproduct Shop

E. N. Stepanov, A. Yu. Roslyi, V. G. Ol’khov, O. A. Shashkov, and I. I. Mel’nikov p. 952  abstract

Preparation of Iron-Bearing Wastes for Industrial Use

E. V. Sidorov, A. G. Valuev, N. A. Bosyakova, and E. V. Stepanova p.955  abstract


Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.