Vol. 31, No. 4, 2022
Synthesis and Study of Structural, Microstructural, and Magnetic Properties of Europium and Scandium 1 Mol % Doped CuFe2O4 Prepared by Self-Propagating High Temperature Synthesis Method
p. 159 abstract
SHS Pressing of (Ti–Al–Mn)/Ti Metal–Intermetallic Layered Material
p. 164 abstract
Synthesis and Study of Highly Porous Nature Gadolinium Doped CoCr2O4: Focus on the Structural, Microstructural, Electric, and Humidity Sensing Properties
p. 169 abstract
Self-Propagating High-Temperature Synthesis for Disposal of Radioactive Waste
p. 179 abstract
High-Temperature Interaction between Carbon Fibers and Cu–Ag Eutectic Alloy
p. 188 abstract
Explanation of Increase in Combustion Velocity of Ti + C Powder Mixture upon Dilution with Nickel Using Convective–Conductive Combustion Model
p. 195 abstract
Thermal Explosion in Ti + Zr + Hf + Nb + Ta + 5С System: Effect of Mechanical Activation
p. 208 abstract
Nanoporous Yttrium-Based Ceramic Materials for Filtration Processes in Conditions of Aggressive Environments and Radiation
p. 215 abstract
The Effect of Correlation between Starting Reagent Size/Ratio and Structural Parameters on the Permeability of Porous Al2O3 Ceramics
p. 220 abstract
SHS and Study of Ni/TiC Catalysts for CO2 Hydrogenation to Methane
p. 230 abstract
Cryo-Milled Nickel–Aluminum Nanostructured Composites: Bifurcated Ignition Mode
p. 236 abstract
Forced SHS Compaction of NiTi
p. 247 abstract
Influence of Fuel on the SCS Temperature of Lithium Aluminate
p. 253 abstract
Synthesis of TiС–ZrC Composite with Submicron Structure by Electro-Thermal Explosion under Pressure
p. 261 abstract
Synthesis of TiZrHfVNb Multi-Principal Element Alloy using SHS Hydrides by “Hydride Cycle” Method
p. 268 abstract
Dielectric Properties of B–N and B–N–xSiO2 Nitride Ceramics by SHS
p. 273 abstract
Boron Combustion in CO2 Atmosphere
p. 276 abstract
Centrifugal SHS of High Cr Composite Materials
p. 279 abstract
On the Nature of the Multidirectional Change in Combustion Velocity of Ti-based Powder Mixtures When Diluted with Inert Additives
p. 283 abstract
On the Nature of the Pyrophoricity of Metal Nanopowders
p. 288 abstract
Erratum to: Mechanochemical Synthesis of Ni–Cr3C2 Nanocomposite
p. 292 abstract