Contents

Russian Journal of Non-Ferrous Metals

Vol. 60, No. 6, 2019

Mineral Processing of Nonferrous Metals

An Increase in Process Characteristics of Flotation of Low-Grade Fine-Disseminated Scheelite Ores

V. A. Ignatkina, E. D. Shepeta, L. A. Samatova and V. A. Bocharov p. 609  abstract

Metallurgy of Nonferrous Metals

Kinetic Evaluation of the Possibility of Aluminum and Magnesium Recovery from Aqueous Solutions of Their Salts as an Alternative to the Electrolysis of Melts

N. V. Nemchinova and A. A. Yakovleva p. 617  abstract

Formation of Side Ledge and Bottom Ledge in an Aluminum Electrolyzer

A. M. Ivanova, P. A. Arkhipov, A. V. Rudenko, O. Y. Tkacheva and Yu. P. Zaikov p. 624  abstract

Application of Polarization Measurements for the Calculation of the Current Efficiency

V. M. Rudoy, N. I. Ostanin, T. N. Ostanina, A. B. Darintseva, V. S. Nikitin and A. I. Cherepanova p. 632  abstract

Metallurgy of Rare and Noble Metals

Fabrication of Binary Niobium Alloys with Low-Melting Metals by the Deposition of Nanoparticles

V. N. Volodin, Yu. Zh. Tuleushev, S. A. Trebukhov, A. V. Nitsenko and N. M. Burabaeva p. 639  abstract

Sorption of Scandium from Sulfuric–Chloride Solutions by Activated Carbons

Wai Moe Aung, M. V. Marchenko and I. D. Troshkina p. 646  abstract

Foundry

Investigation into the Surface Layer Composition Formed on the Ml19 (Mg–Nd–Y–Zn–Zr) Magnesium Alloy during Melting under Protective Gas Atmospheres

V. E. Bazhenov, A. V. Koltygin, A. Yu. Titov, A. A. Rizhskiy and V. D. Belov p. 652  abstract

Physical Metallurgy and Heat Treatment

Comparative Study of Coatings formed by Electrospark Alloying Using TiC–NiCr and TiC–NiCr– Eu2O3 Electrodes

Ph. V. Kiryukhantsev-Korneev, A. D. Sytchenko and E. A. Levashov p. 662  abstract

Phase Composition of D16 and V95 Deformable Aluminum Alloys with the Quantitative Assessment of Metal Burning at Various Stages of Development

R. A. Vorob’ev, S. A. Sorokina and V. V. Evstifeeva p. 673  abstract

On the 85th Anniversary of the Birthday of Academician V.N. Antsiferov

Revisiting Some Prospects for the Further Development of Ideas by Academician V.N. Antsiferov in the Field of Structural Powder Materials

V. Yu. Dorofeyev p. 682  abstract

Production Processes and Properties of Powders

Influence of Gas Atomization Parameters of the KhN60M Alloy on the Powder Characteristics for Laser Surfacing

K. V. Kalinin, S. A. Oglezneva and M. S. Nagaev p. 687  abstract

Fabrication of Metal Powders for Energy-Intensive Combustible Compositions Using Mechanochemical Treatment: 2. Structure and Reactivity of Mechanically Activated Al–Modifier–SiO2 Mixtures

N. N. Mofa, B. S. Sadykov, A. E. Bakkara and Z. A. Mansurov p. 694  abstract

Self-Propagating High-Temperature Synthesis

Influence of Aluminum Additives on the Content and Parameters of the Fine Structure of Titanium Silicon Carbide in SHS Powders

T. L. Talako, A. I. Letsko, Yu. A. Reutsionak, A. P. Abramchuk, S. A. Oglezneva, M. N. Kachenyuk and A. A. Smetkin p. 704  abstract

Magnesiothermal Synthesis and Consolidation of the Multicomponent Powder Ceramics in the Zr–Si–Mo–B System

A. N. Astapov, Yu. S. Pogozhev, M. V. Lemesheva, S. I. Rupasov, V. I. Vershinnikov, I. P. Lifanov and L. N. Rabinskiy p. 710  abstract

Refractory, Ceramic, and Composite Materials

High-Strength Aluminum-Based Composite Materials Reinforced by Microstructures and Nanostructures (Mini Review)

A. S. Konopatsky, Kh. U. Yusupov, S. Corthay, A. T. Matveev, A. M. Kovalskii and D. V. Shtansky p. 720  abstract

Influence of the Concentrate of Rare-Earth Elements on the Stabilization of High-Temperature Phases and Properties of the ZrO2–7Y2O3-Based Ceramics

V. B. Kulmetyeva and D. S. Vokhmyanin p. 730  abstract

Investigation into the Influence of the Structure Dispersion and Homogeneity on the Properties of Powder Metastable Austenitic Carbide Steels and Diamond Tools

S. A. Oglezneva, K. L. Saenkov and A. A. Knyazev p. 738  abstract

Physicochemical Processes of Fabricating Ceramic Materials Based on Nanopowders of Zirconium, Yttrium, Cerium, and Aluminum Oxides

E. N. Makarova and I. V. Antsiferova p. 745  abstract

Nanostructured Materials and Functional Coatings

Growth Features of Diamond Films on the Tungsten Carbide Surface with a Copper Sublayer

D. S. Vokhmyanin and S. A. Oglezneva p. 754  abstract

Phase Transformations and Properties of Concentration-Inhomogeneous Magnetic Materials Based on the Fe–30% Cr–27% Co System

V. A. Kozvonin, A. A. Shatsov, I. V. Ryaposov, K. N. Generalova and L. V. Spivak p. 762  abstract

Materials and Coatings Fabricated by Additive Technologies

Structure and Properties of Corrosion-Resistant Steels Fabricated by Selective Laser Melting

A. A. Smetkin, S. A. Oglezneva, K. V. Kalinin and E. F. Khanipov p. 770  abstract

Application of Powder Materials and Functional Coatings

Powder Metallurgy in Belarus and Global Developmental Trends

P. A. Vityaz, A. Ph. Ilyushchanka and V. V. Savich p. 775  abstract