Contents

Russian Journal of Non-Ferrous Metals


Vol. 59, No. 6, 2018

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Russian Journal of Non-Ferrous Metals ISSN 1067-8212.


Metallurgy of Nonferrous Metals

Study on Pure Mercurous Chloride Leaching with Sodium Thiosulfate

Chao Han, Wei Wang, Feng Xie, Guangxin Wang, Alex Volinsky and Moses Gekhtman p. 589  abstract

Experimental and Kinetic Study of Magnesium Extraction and Leaching from Laterite Nickel Ore by Roasting with Ammonium Sulfate

Jie Li, Yandong Li, Huamei Duan, Xueyi Guo and Yuchun Zhai p. 596  abstract


Metallurgy of Rare and Noble Metals

Solvent Extraction of Copper Using TBP, D2EHPA and MIBK

Mehdi Irannajad, Zahra Afzali and Hossein Kamran Haghighi p. 605  abstract

Investigation into the Carbothermic Method of Digestion of Titanium Raw Materials by the Example of Artificially Synthesized Perovskite

O. N. Budin, A. N. Kropachev, D. G. Agafonov and V. V. Cherepov p. 612  abstract


Foundry

Prediction of Misruns in ML5 (AZ91) Alloy Casting and Alloy Fluidity Using Numerical Simulation

A. V. Petrova, V. E. Bazhenov and A. V. Koltygin p. 617  abstract

Investigation into the Structure and Properties of Solders Based on Aluminum and Zinc in the Form of Cast Rods of a Small Cross Section

K. V. Nikitin, I. Yu. Timoshkin and V. I. Nikitin p. 624  abstract


Pressure Treatment of Metals

Simulation of the Final Stage of the Direct Extrusion Method of Large-Size Rods at Small Elongations

V. R. Kargin and A. Yu. Deryabin p. 632  abstract


Physical Metallurgy and Heat Treatment

Study of the Structural Evolution of a Two-Phase Titanium Alloy during Thermodeformation Treatment

A. Yu. Churyumov, V. V. Spasenko, D. M. Hazhina, A. V. Mikhaylovskaya, A. N. Solonin and A. S. Prosviryakov p. 637  abstract


Theory and Processes of Forming and Sintering of Powder Materials

Contact Interaction Peculiarities at the Boundary of Layers of Structural Steel–High-Speed Steel Hot-Forged Powder Bimetal

Yu. G. Dorofeyev, V. Yu. Dorofeyev, A. V. Babets, E. N. Bessarabov, O. N. Romanova and A. N. Sviridova p. 643  abstract

Experimental and Computational Determination of the Heating Temperature of a Powder Mixture during Explosive Compaction

S. V. Khaustov, A. V. Krokhalev, V. O. Kharlamov, M. A. Tupitsin, S. V. Kuz’min and V. I. Lysak p. 653  abstract


Self-Propagating High-Temperature Synthesis

Conductive TiB2–AlN–BN-Based Composite SHS Ceramics

A. V. Karpov, S. V. Konovalikhin, I. P. Borovinskaya, N. V. Sachkova, D. Yu. Kovalev and A. E. Sytschev p. 658  abstract


Refractory, Ceramic, and Composite Materials

Regularities of Metallurgical Reactions of Ti1 – n${\text{Me}}_{n}^{{\text{V}}}$C0.5N0.5 Carbonitrides with the Ni–Mo Melt

V. A. Zhilyaev and E. I. Patrakov p. 664  abstract

Fabrication of the Nb–16Si Alloy Powder for Additive Technologies by Mechanical Alloying and Spheroidization in Electric-Arc Discharge Thermal Plasma

A. A. Popovich, N. G. Razumov, A. V. Grigoriev, A. V. Samokhin, V. Sh. Sufiiarov, I. S. Goncharov, A. A. Fadeev and M. A. Sinaiskii p. 671  abstract

Development of the Aluminum Powder Composite Based on the Al–Si–Ni System and Technology of Billet Fabrication of This Composite

V. V. Vasenev, V. N. Mironenko, V. N. Butrim, O. E. Osintsev and S. Ya. Betsofen p. 677  abstract


Materials and Coatings Fabricated by Additive Technologies

Comparative Study of the Structural-Phase State and Mechanical Properties of Ni–Cr(X) and Fe–Cr(X) Heat-Resistant Alloys Fabricated by Additive Technologies

Yu. R. Kolobov, A. N. Prokhorov, S. S. Manokhin, A. Yu. Tokmacheva-Kolobova, D. I. Serebryakov and V. V. Afanasiev p. 685  abstract


Modification of the Surface, Particularly by Beams of Charged Particles and Photon and Plasma Fluxes

Investigation into the X-Radiation Effect on the Structure and Microhardness of the Tungsten Powder-Filled Composite

A. A. Lozovan and F. E. Vilkov p. 693  abstract


Nanostructured Materials and Functional Coatings

Structure, Mechanical Properties, and Oxidation Resistance of MoSi2, MoSiB, and MoSiB/SiBC Coatings

Ph. V. Kiryukhantsev-Korneev and A. Yu. Potanin p. 698  abstract

Conceptual Protection Model for Especially Heat-Proof Materials in Hypersonic Oxidizing Gas Flows

V. S. Terentieva and A. N. Astapov p. 709  abstract