Contents
Russian Journal of Non-Ferrous Metals


Vol. 55, No. 6, 2014

A simultaneous English language translation of this journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Journal of Non-Ferrous Metals ISSN 1067-8212.


Metallurgy of Nonferrous Metals

Influence of the Microheterogeneity and Crystallization Conditions of the Al–50% Sn Alloy
on the Mechanical Properties of Phase Components of the Ingot

O. A. Chikova, A. N. Konstantinov, E. V. Shishkina, and D. S. Chezganov p. 505  abstract

Principal Distinction of the Methods of Low-Frequency and Ultrasonic Effects on Melts

I. E. Ignat’ev, E. A. Pastukhov, and E. V. Ignat’eva p. 509  abstract

Thermodynamic Simulation of Silicon and Iron Reduction and Zinc and Lead Distillation
in Zincoligonite Ore–Carbon Systems

A. S. Kolesnikov p. 513  abstract

On the Possibility of Applying Sulfur for Sulfidization of Anthropogenic Wastes
of Copper Production

A. K. Serikbaeva, K. Kh. Zhumashev, F. A. Bedrikulova, and A. A. Suieubergenova p. 519  abstract

Investigation into the Properties of Germanium-Containing Raw Materials
of the Pavlovsk Brown-Coal Deposit

I. N. Tanutrov, M. N. Sviridova, and A. A. Babushkin p. 525  abstract

Preparation of Cupric Oxide by Isothermal Oxidation of Metallic Copper Powder Produced
by Electroless Deposition

Nizamettin Demirkiran and Mehmet Kayra Tanaydin p. 529  abstract

The New Technique on Separation of Cr and Fe as well as Ni–Co–Mn Impurity
in Leaching Sulfate Solution of Ferrochrome Alloy

Ji-jun Liu, Guo-rong Hu, Ke Du, Zhong-dong Peng, Wei-gang Wang, and Yan-bing Cao p. 533  abstract

An Investigation on the Kinetics of Lead Recovery from Smelting Furnace Slag
Using Hydrochloric Acid

M. Shirinbayan, H. Razavizadeh, and M. R. Aboutalebi p. 538  abstract

Effects of Extrusion Speeds on Grains Environment of Magnesium
by Combined Extrusion

Hongjun Hu, Li Yun Yang, Zhai Zhi Ye, Fan Jun Zhi, and Ou Zhongwen p. 542  abstract


Metallurgy of Rare and Noble Metals

Thermodynamic Properties of Alloys of Praseodymium with the Gallium–Indium Eutectic Melt

S. Yu. Melchakov, L. F. Yamshchikov, V. A. Ivanov, V. A. Volkovich,
S. P. Raspopin, and A. G. Osipenko
p. 550  abstract


Foundry

Electrodialysis Processing of a Solution in the Alumina Boron Phosphate Concentrate
in the Ultrasonic Field for Investment Casting

L. G. Znamenskii, A. S. Varlamov, and S. S. Vertsyukh p.554  abstract


Pressure Treatment of Metals

Optimization of Geometry of the Process Tool in Production
of Low-Temperature Superconductors for the International Thermonuclear Experimental Reactor

G. L. Kolmogorov, Yu. A. Burdina, T. V. Chernova, and E. K. Kobeleva p. 559  abstract

Analysis of the Behavior of a Three-Sheet Corrugated Structure
under the Linear Pressure-Supply Law

A. A. Kruglov, R. Sh. Musina, and F. U. Enikeev p. 564  abstract

Modeling and Optimization of Hydromechanical Extrusion of Tough-to-Machine Metals

O. Yu. Agapitova and A. G. Zalazinskii p. 571  abstract


Powder Materials and Coatings

Fabrication and Investigation of Carbide Billets from Powders Prepared
by Electroerosive Dispersion of Tungsten-Containing Wastes

E. V. Ageev and R. A. Latypov p. 577  abstract


Production Processes and Properties of Powders

Investigation into the Oxidation of Cobalt and Nickel Nanopowders

D. V. Lysov, E. L. Dzidziguri, Zh. E. Yakhiyaeva, and D. V. Kuznetsov p. 581  abstract

Preparation of Nanopowders of Carbides and Hard-Alloy Mixtures
Applying Low-Temperature Plasma

N. V. Isaeva, Yu. V. Blagoveshchenskii, N. V. Blagoveshchenskaya, Yu. I. Mel’nik,
A. V. Samokhin, N. V. Alekseev, and A. G. Astashov
p. 585  abstract


Theory and Processes of Forming and Sintering of Powder Materials

High-Speed Electropulse Plasma Sintering of Nanostructured Tungsten Carbide:
Part 1. Experiment

V. N. Chuvil’deev, Yu. V. Blagoveshchenskii, M. S. Boldin, A. V. Moskvicheva,
N. V. Sakharov, A. V. Nokhrin, N. V. Isaeva, S. V. Shotin, Yu. G. Lopatin,
A. V. Pisklov, and D. N. Kotkov
p. 592  abstract

Influence of Production Parameters of Sintering on the Structure and Properties
of VK5 Hard Alloy Made of Tungsten Carbide SHS Powder

A. A. Zaitsev, V. I. Vershinnikov, V. S. Panov, E. A. Levashov, I. P. Borovinskaya,
I. Yu. Konyashin, S. I. Rupasov, E. I. Patsera, V. N. Shumenko, and E. I. Zamulaeva
p. 599  abstract


Self-Propagating High-Temperature Synthesis

Self-Propagating High-Temperature Synthesis of Highly Dispersed Titanium-Carbide Phase
from Powder Mixtures in the Aluminum Melt

A. R. Luts, A. P. Amosov, And. A. Ermoshkin, Ant. A. Ermoshkin,
K. V. Nikitin, and I. Yu. Timoshkin
p. 606  abstract

Centrifugal SHS Metallurgy of Nickel Aluminide-Based Eutectic Alloys

V. N. Sanin, D. M. Ikornikov, D. E. Andreev, and V. I. Yukhvid p. 613  abstract

Preparation of Silicon-Carbide Nanopowder and Compositions Based
on It Using SHS Azide Technology

Yu. V. Titova, A. P. Amosov, A. A. Ermoshkin, Yu. M. Markov,
T. N. Khusainova, and A. V. Popova
p.620  abstract


Refractory, Ceramic, and Composite Materials

Influence of the Temperature of Hot Isostatic Pressing of -TiAl-Based Cast Alloys
on the Phase Structure and Composition

N. A. Belov and V. D. Belov p. 627  abstract

Synthesis of High-Temperature Mo5SiB2-Based Ceramics in the Combustion Mode

Yu. S. Pogozhev, A. Yu. Potanin, E. A. Levashov, A. V. Novikov,
T. A. Sviridova, and N. A. Kochetov
p. 632  abstract

Modification of the Fe–Cu–Co–Sn–P Metal Matrix with Various Forms of Carbon Nanomaterials

D. A. Sidorenko, A. A. Zaitsev, A. N. Kirichenko, V. V. Kurbatkina, E. A. Levashov,
P. I. Sevast’yanov, and S. I. Rupasov
p. 639  abstract


Nanostructured Materials and Functional Coatings

The Influence of Si Concentrations on the Oxidation Resistance of Mo–Si–B–(N) Coatings

Ph. V. Kiryukhantsev-Korneev, S. O. Andreev, N. V. Shvyndina, E. A. Levashov,
A. N. Timofeev, and D. V. Shtansky
p. 645  abstract

Features of the Influence of Nanomodification and Macrostructurization
on the Properties of the Fe–Mo Binder for a Diamond Tool

V. A. Andreev, A. I. Gureev, P. I. Sevast’yanov, V. I. Loginov, E. A. Levashov,
P. A. Loginov, S. I. Rupasov, and V. V. Kurbatkina
p. 652  abstract


Application of Powder Materials and Functional Coatings

Dependence of Abrasive Ability of Truing Diamond Tools on Mechanical Properties
of Metallic Matrices

N. I. Polushin, A. I. Laptev, M. N. Sorokin, A. B. Tleuzhev,
A. S. Kushkhabiev, and R. V. Taov
p.657  abstract


Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.