Vol. 60, No. 5, 2019

Russian Journal of Non-Ferrous Metals

Mineral Processing of Nonferrous Metals

Effect of Slime and Impurity Removal as a Pre-Treatment Stage Using a Low-Grade Zinc-Oxide Sample

Aisan Ramadi, Mohammad Noaparast, Seyed Ziaedin Shafaie and Armin Salsani p. 463 abstract

Metallurgy of Nonferrous Metals

Numerical Simulation Study on the Preparation of Micro-Nanometer MgO Magnesium Oxide by Direct Pyrolysis of Molten MgCl₂ Magnesium Chloride

Chao Lv, Tiyuan Xia, Liping Niu, Qiuyue Zhao and Wenbo Wang p. 473 abstract

Fabrication of Silumins Using Silicon Production Waste

M. P. Kuz’min, L. M. Larionov, V. V. Kondratiev, M. Yu. Kuz’mina, V. G. Grigoriev, A. V. Knizhnik and A. S. Kuz’mina p. 483 abstract

Metallurgy of Rare and Noble Metals

La–Ni Based Alloy Modification by Ce and Fe for the Next Hydrogen Storage in Low-Temperature Metal Hydrides

A. Chesalkin, A. Martaus, J. M. Averina and V. V. Men’shikov p. 492 abstract

Pressure Treatment of Metals

Study of Compaction of the Titanium Powder by the Experimental-Analytical Method

A. G. Zalazinskii, A. V. Nesterenko and I. M. Berezin p. 499 abstract

Foundry

Structure and Properties of the ML5 Alloy for Various Modification Methods

B. L. Bobryshev, V. S. Moiseev, I. A. Kipin and I. A. Petrov p. 504 abstract

Physical Metallurgy and Heat Treatment

High-Temperature Ion Nitriding Carbide Disposable Inserts of T15K6 Brand

S. I. Bogoduhov, E. S. Kozik and E. V. Shvidenko p. 509 abstract

Investigation into the Microstructure and Mechanical Properties in Submicrovolumes of LS591-A Brass

G. A. Tkachuk, V. A. Maltsev and O. A. Chikova p. 517 abstract

Thermal Stability of the Structure and Microhardness of the Al–0.05 vol % Al₂O₃ Nanocomposite Fabricated by Accumulative Roll Bonding

K. V. Ivanov, E. A. Glazkova, S. V. Fortuna and T. A. Kalashnikova p. 524 abstract

Aluminum-Matrix Natural Composite Material Based on the Al–Ca–Ni–La–Fe System

T. K. Akopyan, N. V. Letyagin and M. E. Samoshina p. 531 abstract

Structure and Properties of Coarse-Grained WC–Co Alloys with an Especially Homogeneous Microstructure

E. N. Avdeenko, E. I. Zamulaeva, A. A. Zaitsev, I. Yu. Konyashin and E. A. Levashov p. 542 abstract

Theory and Processes of Forming and Sintering of Powder Materials

Revisiting the Applicability Question of G.V. Samsonov’s Activated Sintering Concept in Studying Deformation Processes of Powder Materials

V. Yu. Dorofeyev, A. N. Sviridova and Kh. S. Kochkarova p. 549 abstract

Self-Propagating High-Temperature Synthesis

Applying SHS for the Fabrication of the Ti₃SiC₂–Ni Composite

A. P. Amosov, E. I. Latukhin and A. M. Ryabov p. 555 abstract

Refractory, Ceramic, and Composite Materials

Micromechanical Investigation of the Fatigue Crack Propagation and Damage Development in Al/Al₂O₃/SiC Hybrid Metal Matrix Composite

AKM Asif Iqbal and Yoshio Arai p. 566 abstract

Studies on Copper-Coated Boron Carbide Particle-Reinforced Copper-Matrix/Graphite Self-Lubricating Composite Materials

Yu-nan Tian, Zhi-he Dou, Liping Niu and Ting-an Zhang p. 575 abstract

Prospects of Nanotechnology and Design of Materials Based on Refractory Compounds

I. L. Shabalin p. 583 abstract

Modification of the Surface, Particularly by Beams of Charged Particles and Photon and Plasma Fluxes

Effect of High-Power Ion Beams on the Surface Topography and Structure of the Subsurface Layer of Submicrocrystalline Titanium Alloys

M. V. Zhidkov, A. E. Ligachev, Yu. R. Kolobov, G. V. Potemkin and G. E. Remnev p. 590 abstract

Nanostructured Materials and Functional Coatings

Hybrid Technology Combining Vacuum Electrospark Alloying, Cathodic Arc Evaporation, and Magnetron Sputtering for the Deposition of Hard Wear-Resistant Coatings

A. N. Sheveyko, K. A. Kuptsov, Ph. V. Kiryukhantsev-Korneev, E. A. Levashov and D. V. Shtansky p. 598 abstract

Contents