Vol. 59, No. 5, 2018
A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Russian Journal of Non-Ferrous Metals ISSN 1067-8212.
Sorption of Fluoride Ions by Iron Oxyhydrate Fixed on the Carriers Part I. Organic Carriers
p. 465 abstract
Influence of Electrolyte Overheating and Composition on the Sideledge of an Aluminum Bath
p. 471 abstract
Ammoniacal Dissolution of Polymetallic Alloy Produced from Waste Electroscrap
p. 476 abstract
Research on the Electrochemical Behavior of Si(IV) on the Tungsten Electrode in CaCl2–CaF2–CaO Molten Melt
p. 486 abstract
Roasting Pre-Treatment of High-Sulfur Bauxite for Sulfide Removal and Digestion Performance of Roasted Ore
p. 493 abstract
Certain Tendencies in the Rare-Earth-Element World Market and Prospects of Russia
p. 502 abstract
Influence of Methods of Producing the AlTi Master Alloy on Its Structure and Efficiency in the Grain Refinement of Aluminum Alloy
p. 512 abstract
Influence of Annealing at Various Temperatures on the Structure and Hardness of Amorphous Ribbons of the Al85Y8Ni5Co2 Alloy
p. 520 abstract
Development of Composite Bronzes Reinforced by Steel Dendrites
p. 527 abstract
Removal of Hexavalent Chromium from Mine Effluents by Ion Exchange Resins-Comparative Study of Amberlite IRA 400 and IRA 900
p. 533 abstract
Formation of Amorphous Structures and Their Crystallization in the Cu–Ti System by High-Energy Ball Milling
p. 543 abstract
Revisiting the Possibility of Formation of Hard Alloys from Powder Mixtures of Carbides with Metals by Explosive Compacting without Sintering
p. 550 abstract
Reducing the Metal Content in PCD Polycrystalline Diamond Layer by Chemical and Electrochemical Etching
p. 557 abstract
Variation in Strength, Hardness, and Fracture Toughness in Transition from Medium-Grained to Ultrafine Hard Alloy
p. 563 abstract
SHS Metallurgy of Cr2AlC MAX Phase-Based Cast Materials
p. 570 abstract
Research into the Possibility of Producing Single-Phase Tantalum–Hafnium Carbide by SHS
p. 576 abstract
Features of Microstructure Formation in the Ni–Al–W System during SHS
p. 583 abstract