Contents
Russian Journal of Non-Ferrous Metals

Vol. 50, No. 4, 2009

Simultaneous English language translation of the journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Journal of Non-Ferrous Metals ISSN 1067-8212.

Mineral Processing of Non-Ferrous Metals

Developing the Technology for the Effective Final Concentration of Gold-Containing
Gravity Concentrates

S. I. Evdokimov and A. M. Pan’shin p. 321  abstract

Investigation of the Formation of Precipitates of Copper Cations with Sulfhydryl Collectors

V. A. Ignatkina p. 327  abstract

Metallurgy of Non-Ferrous Metals

A Multifactor Simulation of the Process of Leaching Oxidized Molybdenum
Products in Sulfuric Acid Solutions

P. N. Naguman, L. M. Karimova, Z. M. Tokaeva, and U. B. Shinbaev p. 330  abstract

A Qualitative and Quantitative Evaluation of the Technological Processes
in the Metallurgy of Nonferrous Metals

V. P. Malyshev, S. Sh. Kazhikenova, and A. M. Turdukozhaeva p. 335  abstract

The Solubility and Dissolution Rate of Alumina in Acidic Cryolite Aluminous Melts

N. V. Vasyunina, I. P. Vasyunina, Yu. G. Mikhalev, and A. M. Vinogradov p. 338  abstract

An Investigation of the Electrolytes of Aluminum Production with the Help
of Physicochemical Simulation

A. V. Mukhetdinova, V. A. Bychinskii, A. A. Tupitsyn, and A. L. Finkel’shtein p. 343  abstract

Metallurgy of Rare and Noble Metals

Investigations into Extracting Gold from Gold-Containing Magnesium Fraction
by Chlorination

L. S. Strizhko, R. I. Normurotov, and D. B. Kholikulov p. 348  abstract

Investigations on Processing Low-Grade Molybdenum Concentrate
by the Nitric-Acid Method

A. S. Medvedev and P. V. Aleksandrov p. 353  abstract

Physical Metallurgy and Heat Treatment

The Influence that a Zirconium Additive has on the Strength and Electrical
Resistance of Cold-Rolled Aluminum Sheets

N. A. Belov, A. N. Alabin, and A. Yu. Prokhorov p. 357  abstract

Melting of -TiAl in the Alumina Crucible

D. Eatesami, M. M. Hadavi, and A. Habibollahzade p. 363  abstract

Powdered Materials and Coatings

The Composition and Parameters of Tungsten-Containing Nanocrystalline
Structures Made of Metalorganics

A. G. Ermilov, E. V. Bogatyreva, and T. A. Sviridova p. 368  abstract

Surface Engineering. Multifunctional Films.
Corrosion and Protection of Metals

The Corrosion–Electrochemical Behavior of the PT-7M Titanium Alloy after Oxynitriding

I. N. Pohrelyuk, O. V. Tkachuk, and R. V. Proskurnyak p. 373  abstract

Automation of Production Processes

A Dynamic Model of the Process of Biosorption of Silver

L. S. Strizhko, S. I. Loleit, and A. O. Novakovskaya p. 377  abstract

Processes of Obtaining and Properties of Powders

Experimental Determination of the Dependence of Starch Looseness
on the Concentration of the Silicon Dioxide Nanopowder (Tarcosil) in It

S. P. Bardakhanov, S. A. Kravets, V. I. Lysenko, V. A. Naumenkov, A. V. Nomoev,
V. V. Obanin, D. Yu. Trufanov, and A. A. Shibaev p. 383  abstract

Obtaining Anodic Material from Vegetable Raw Materials for Lithium-Ion (Polymer)
Storage Batteries

D. V. Onishchenko and A. A. Popovich p. 386  abstract

Vibroaeratic Mixing of the Powders in a Gas Medium: Report 1. Developing a Method
and Theoretical Foundations for Vibroaeratic Powder Mixing and Destroying Conglomerates

Yu. V. Kontsevoi, E. A. Pastukhov, I. E. Ignat’ev, V. Ya. Bulanov, and E. V. Ignat’eva p. 390  abstract

Specific Features of the Use of Nontraditional Carbon-Containing Components
in the Technology of Powder Steels: Report 3. The Effect of Technological Factors
on the Structure Formation and Properties of Hot-Deformed Powder Steels

V. I. Kostikov, Yu. G. Dorofeev, Zh. V. Eremeeva, N. N. Zherditskaya,
A. P. Ul’anovskii, and G. Kh. Sharipzyanova p. 395  abstract

Magnetovibrational Technology in Separating Slimes of Abrasive Production

Yu. M. Vernigorov, S. I. Egorova, I. N. Egorov, and D. M. Plotnikov p. 400  abstract

Theory and Processes of Formation
and Sintering of Powdered Materials

Developing a Procedure for the Repeated Heat Treatment (Resintering) of UO₂ Fuel Pellets

V. V. Basov p. 404  abstract

Refractory, Ceramic, and Composite Materials

The Structure and Properties of Forged Composite High-Speed Steel: Titanium Carbide

L. I. Svistun, D. V. Dmitrenko, R. L. Plomod’yalo, and G. G. Serdyuk p. 408  abstract

Porous Materials and Biomaterials

Manufacturing Porous Materials from Metalorganic Mixtures: Report 1

V. Yu. Lopatin, V. S. Levchenko, A. G. Ermilov, E. V. Bogatyreva, and I. A. Mailyants p. 412  abstract

Nanostructured Materials and Functional Coatings

The Mechanical Properties of a Composite Coating with a Polymer Matrix Based
on Sodium Carboxymethylcellulose and Aluminum Powder

N. M. Antonova p. 419  abstract

Application of Powdered Materials
and Functional Coatings

Ion-plasma Ti–Al–N Coatings on a Cutting Hard-Alloy Tool Operating
under Conditions of Constant and Alternating-Sign Loads

V. N. Anikin, I. V. Blinkov, A. O. Volkhonskii, N. A. Sobolev, S. G. Tsareva,
R. V. Kratokhvil, and A. E. Frolov p. 424  abstract

Chronicle

Stages of Powder Metallurgy at OAO AVTOVAZ

V. T. Koftelev p. 432

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.