Contents
Russian Journal of Non-Ferrous Metals

Vol. 54, No. 4, 2013

A simultaneous English language translation of this journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Journal of Non-Ferrous Metals ISSN 1067-8212.

Mineral Processing of Nonferrous Metals

Influence of Capillary Pressure in Bubbles on Their Attachment to Particles
during Froth Flotation: Part Two

V. I. Melik-Gaikazyan, N. P. Emel’yanova, and T. I. Yushina p. 281  abstract

Metallurgy of Nonferrous Metals

Simulation of the Solidification of the Melt in the Vanyukov Furnace
in the Case of Emergency Stoppage

V. G. Lisienko, G. K. Malikov, M. V. Morozov, V. V. Belyaev, and V. A. Kirsanov p. 287  abstract

Metallurgy of Rare and Precious Metals

Quantum-Chemical Investigation into the Effects of Hydration of Dicyanoaurates in Alkali Media

V. V. Elshin, V. A. Shagun, and A. E. Ovsyukov p. 292  abstract

Pressure Treatment of Metals

Energy-Power Conditions for Drawing Bimetal Blanks

G. L. Kolmogorov, T. V. Chernova, Yu. A. Vlasova, and M. V. Snegiryova p. 297  abstract

Foundry

Quantitative Analysis of the Primary Crystallization of Iron-Containing Phases
as Applied to Aluminum Alloys of Various Doping Systems

N. A. Belov p. 300  abstract

Calculation of Phase Diagrams of Systems Al–Cu–Zn–Mg and Al–Cu–Zn–Mg–Fe–Si

T. K. Akopyan, V. S. Zolotorevskii, and A. V. Khvan p. 307  abstract

Influence of the Structure of the AlSi20 Foundry Alloy on the Microstructure and Viscosity
of the Al–6% Si Model Silumin in Solid and Liquid States

K. V. Nikitin, A. B. Finkel’shtein, O. A. Chikova, and I. Yu. Timoshkin p. 314  abstract

The Fabrication and Characterization of Al/SiC-MMC Castings Produced
by Vacuum Assisted Solidmould Investment Casting Process

KeremAltug Guler, Alptekin Kisasoz, and Ahmet Karaaslan p. 320  abstract

Obtaining Processes and Properties of Powders

Steel–Aluminum Layered Composite with a Nanostructured Intermediate Layer

Yu. V. Kontsevoi, E. V. Ignat’eva, I. E. Ignat’ev, E. A. Pastukhov,
I. G. Brodova, S. A. Petrova, I. G. Shirinkina, and R. G. Zakharov p.325 abstract

Self-Propagating High-Temperature Synthesis

Wear-Resistant Ti–Al–Si–C–N Coatings Produced by Magnetron Sputtering
of SHS Targets

F. V. Kiryukhantsev-Korneev, K. A. Kuptsov, A. N. Sheveiko,
E. A. Levashov, and D. V. Shtansky p. 330  abstract

Interaction of Ferrosilicon with Nitrogen in the Presence of Zircon and Ilmenite Concentrates
in the Process of Self-Propagating High-Temperature Synthesis

L. N. Chukhlomina, O. G. Vitushkina, and A. N. Avramchik p. 336  abstract

Modification of a Surface, Particularly by Beams
of Charged Particles and Photon and Plasma Fluxes

Microarc Oxidation of Light Constructional Alloys: Part 1. Main Notions
on the Microarc Oxidation of Light Constructional Alloys

A. G. Rakoch, I. V. Bardin, V. L. Kovalev, and T. G. Avanesyan p. 341  abstract

Microarc Oxidation of Light Constructional Alloys: Part 2. Influence of the Current Waveform
on the Growth Kinetics of Microarc Coatings on the Surface of Light Construction Alloys
in Alkali (pH 12.5) Electrolytes

A. G. Rakoch, I. V. Bardin, V. L. Kovalev, T. G. Avanesyan, and A. G. Seferyan p. 345  abstract

Modification of the T15K6 Hard Alloy with High-Power Pulsed Ion Beams
and Compression Plasma Fluxes

V. V. Uglov, G. E. Remnev, A. K. Kuleshov, V. M. Astashinskii, and M. S. Saltymakov p.349 abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.