Contents
Russian Journal of Non-Ferrous Metals

Vol. 50, No. 3, 2009

Simultaneous English language translation of the journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Journal of Non-Ferrous Metals ISSN 1067-8212.

Mineral Processing of Non-Ferrous Metals

Surface Forces in the Processes of Aggregation and Flotation of Particles

S. I. Evdokimov and A. M. Pan’shin p. 193  abstract

Concentration of Gold–Antimony Ores in the Sakha Republic (Yakutia)

G. I. Baltukhaev and P. M. Solozhenkin p. 199  abstract

Metallurgy of Non-Ferrous Metals

Method of Burning the Molybdenite Concentrates

D. V. Ovtsyn, V. V. Kostyunin, V. N. Potapov, and G. N. Kozhevnikov p. 206  abstract

The Current Efficiency of Barium during the Electrolysis of Chloride and Oxide–Chloride Melts
with Liquid Cadmium and Zinc Cathodes

A. V. Volkovich, V. I. Zhuravlev, I. S. Trofimov, and A. E. Gorbachev p. 209  abstract

Foundry

The Effect of Inclusions of Aluminum Oxide on the Processes of Hydrogen Dissolution
and Evolution in Aluminum and Copper Melts

M. V. Pikunov, S. P. Gerasimov, and V. A. Yudin p. 214  abstract

“Boiling” the Melt during Copper Remelting

A. N. Konovalov, M. V. Pikunov, and S. P. Gerasimov p. 218  abstract

Pressure Treatment of Metals

Power Parameters of the Drawing Process in a Roller Die

I. V. Dobrov p. 221  abstract

The Computational Procedure of the Power and Kinematic Parameters
of the Deformation Center upon Rolling the Multilayer Systems with a Dispersed Layer

Yu. V. Kontsevoi, I. E. Ignat’ev, E. V. Ignat’eva, and E. A. Pastukhov p. 228  abstract

Physical Metallurgy and Heat Treatment

Calculation of the Yield Point of Silumins by the Characteristics of Their Structure

A. N. Solonin, A. Yu. Churyumov, S. A. Sharkova, and V. S. Zolotorevskii p. 234  abstract

Prediction of the Structural State and Properties of Pressed Aluminum Semifinished Products
with the Use of a QFORM CAD System

A. E. Gabidullin, A. V. Ovchinnikov, V. P. Alpatov, and T. A. Chernoglazova p. 242  abstract

Powdered Materials and Coatings

Effect of Ball Milling on Reaction between TiO₂ and Al

A. R. Kamali, I. Babaei Nejad, M. R. Aboutalebi, and H. Razavizadeh p. 246  abstract

The Compaction of Silicon Carbide and Compositions Based on It:
An Analysis of Domestic and Foreign Experience

V. V. Rudneva, G. V. Galevskii, and E. K. Yurkova p. 250  abstract

Automation of Technological Processes

A System Simulation of a Production Complex for Fabrication of Composites for Electrotechnology

A. G. Zalazinskii, A. P. Polyakov, and P. A. Polyakov p. 255  abstract

An Investigation of the Dependence of Roasting Characteristics of Sulfide Nickel Concentrates
in Fluidized Bed Furnaces on Various Factors by the Method of Design Imitation Experiment

M. I. Alkatsev and V. M. Alkatseva p. 262  abstract

Processes of Obtaining and Properties of Powders

Specific Features of the Use of Unconventional Carbon-Containing Components
in the Technology of Powdered Steels: Report 2. The Influence of Unconventional
Carbon-Containing Components on the Sintering Processes in the Technology of Powdered Steel

V. I. Kostikov, Yu. G. Dorofeev, Zh. V. Eremeeva, N. N. Zherditskaya,
A. P. Ul’yanovskii, and G. Kh. Sharipzyanova p. 266  abstract

Obtaining the Ni–TiC Composite Powder by the Carbidization of Titanium Nickelide

A. V. Kasimtsev, Yu. V. Levinskii, and V. V. Zhigunov p. 270  abstract

The Composition, Structure, and Properties of Calcium-Hydride Powder of Titanium Carbide

A. V. Kasimtsev, V. V. Zhigunov, and N. Yu. Tabachkova p. 276  abstract

Some Results Uranium Dioxide Powder Structure Investigation

E. I. Andreev, K. V. Glavin, A. V. Ivanov, V. V. Malovik, V. V. Martynov, and V. S. Panov p. 281  abstract

Theory and Processes of Formation and Sintering the Powdered Materials

The Kinetics of Diffusion Processes in the Nickel–Aluminum Composition

V. G. Shmorgun, Yu. P. Trykov, O. V. Slautin, V. V. Metelkin, and A. I. Bogdanov p. 286  abstract

The Rheological Behavior of Powdered Charge Materials during Cold Uniaxial Pressing

A. M. Stolin, P. M. Bazhin, and D. V. Pugachev p. 290  abstract

The Packing Density of the Particles in Powder Mixtures of Different Dispersities

V. D. Khramtsov p. 294  abstract

The Behavior of Closed Pores at the Final Stage of Sintering

Yu. V. Levinsky p. 298  abstract

Refractory, Ceramic, and Composite Materials

The Possibility of Utilization of Ni₃Al as the Binding Material for Hard Alloys

V. S. Panov, V. A. Shugaev, and M. A. Gol’dberg p. 317  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.