Contents

Russian Journal of Non-Ferrous Metals

Vol. 67, No. 3, 2026

Synthesis of WC-Added Copper-Titanium Based Composites by Powder Metallurgy: Mechanical Properties, Tribological, and Electrical Behavior

P. C. Tokat-Bırgın p. 247  abstract

Continuous Leaching Approach for Gold Recovery from Printed Circuit Boards using Hexaamminecobalt(III)–Thiosulfate Generated from Spent Lithium Cobalt Oxide

Longwei Zhao, Chao Han, Jiaqi Shi, Quan Zhou, Qiankun Jing, and Wei Liu p. 260  abstract

Effect of Boron Alloying on the Structure and Mechanical Properties of Multicomponent Fe–Co–Ni–Cr–V Alloys

A. I. Bazlov, M. S. Parkhomenko, E. O. V’yushin, A. V. Pozdnyakov, R. M. Bikbaev, O. A. Yakovtseva, E. N. Zanaeva, and A. S. Prosviryakov p. 281  abstract

Effect of Mo Doping Amount on the Mechanical Properties of Ni–Fe Alloy

Guoling Zhang and Wei Wang p. 291  abstract

Fabrication of Porous Ti25TaxB Alloy by Powder Metallurgy

E. Mihalcea, F. Alvarado-Hernández, O. Jimenez, L. Olmos, and H. J. Vergara-Hernández p. 300  abstract

A Review on the Stir-Cast Aluminium Metal Matrix Composites: Properties, Challenges, and Research Opportunities

M. Manoj, G. R. Jinu, A. Riyaz Ahmed, R. Leo Bright Singh, and S. Vijayakumar p. 307  abstract

Investigation of the Porosity and Surface Properties of AlSi10Mg Alloy Produced by Selective Laser Melting

S. V. Konovalov, V. K. Drobyshev, I. A. Panchenko, I. A. Kan, and M. O. Gilvitinov p. 336  abstract

Hybrid TiC–Graphite–Bronze Composites Obtained by the SHS Method: Structure, Strength, Tribology

E. R. Umerov, A. P. Amosov, E. I. Latukhin, I. A. Rastegaev, and M. A. Afanasiev p. 343  abstract

Statistical Evaluation and Wear Parameters Optimization of Rare-Earth Oxide Nanoparticles Reinforced AZ31 alloy Composites Fabricated by Squeeze casting

Ennamuri Subbarao, Samuthira Pandi V, Ismail Kakaravada, Vivek Marotrao Korde, Baluguri Suresh Babu, and Dr. Chandrabhanu Malla p. 355  abstract

Influence of the Heterogeneous Structure Formed During the Cellular Reaction on the Mechanical Behavior and Structural Evolution of the TNM–B1 Alloy During Hot Deformation

V. S. Sokolovskii, M. S. Ozerov, and G. A. Salishchev p. 375  abstract

Erratum

Erratum to: The Influence of Heat Treatment Conditions of Multicomponent Brasses of the CuZnMnAlSiFePb System on Their Wear Resistance under Dry Friction Conditions

A. V. Svyatkin, M. A. Vyboyshchik, L. P. Kondratyeva, and I. A. Rastegaev p. 381  abstract