Contents

Russian Journal of Non-Ferrous Metals


Vol. 63, No. 3, 2022


Metallurgy of Nonferrous Metals

Efficiency of Ozone Application for Extraction of Metals from Mineral Raw Materials

L. N. Krylova p. 247  abstract

The Use of Liquid Extraction for the Purification of Solutions from the Nickel Production of JSC Kola MMC from Impurities

L. V. Dyakova, A. G. Kasikov and M. V. Jeleznova p. 256  abstract

Consumption of Anode Paste for Aluminum Production

A. A. Drizhenko, S. V. Datsyura and A. S. Yasinsky p. 263  abstract

Arsenic Reduction Kinetics during Vacuum Carbothermal Reduction of Dust with High Content of Arsenic and Copper

Cong Li, Rong Liang Zhang, Jia Zeng, Chao Fan Tang, Wei Zhang, Jin Tao Cao, Yu Qian Tao, Jia Jun Li, Cheng Wang and Yi Fu He p. 269  abstract

The Viscosity of Molten Salts Based on the LiF–BeF2 System

O. Yu. Tkacheva, A. V. Rudenko, A. A. Kataev, P. N. Mushnikov, A. S. Kholkina and Yu. P. Zaikov p. 276  abstract


Metallurgy of Rare and Noble Metals

Distillation Recovery of Tellurium from Copper Telluride in Oxide Forms

A. V. Nitsenko, V. N. Volodin, X. A. Linnik, F. Kh. Tuleutay and N. M. Burabaeva p. 284  abstract


Foundry

Physical Methods of Processing the Melts of Metal Matrix Composites: Current State and Prospects

V. B. Deev, E. S. Prusov and E. H. Ri p. 292  abstract


Physical Metallurgy and Heat Treatment

The Influence of Direct Laser Deposition on the Structure and Properties of Ni–Cr–W–Mo Heat-Resistant Nickel Alloy

A. M. Khakimov, S. S. Zhatkin, K. V. Nikitin, V. I. Nikitin and V. B. Deev p. 305  abstract

Effect of Addition of Scandium in Filler Rod on Tungsten Inert Gas Welding of AA5052-H32 Alloy

L. Nafeez Ahmed, Dhinakaran Veeman and S. M. Muthu p. 315  abstract


Pressure Treatment of Metals

Development and Experimental Testing of the Technology for Producing Deformed Bars of Alloy D16T from Continuously Casting Billets of Small Diameter with Low Elongation Ratios

S. P. Galkin, A. S. Aleshchenko and Yu. V. Gamin p. 328  abstract


Production Processes and Properties of Powders

Effects of Mechanical Alloying on Ni-Rich NiTi Shape Memory Alloys Produced by Hot Isostatic Pressing

Ümit Zeybek and Serdar Karaoğlu p. 336  abstract


Refractory, Ceramic, and Composite Materials

The Analysis of Microstructure and Mechanical Properties in B4C Reinforced Al–Zn Alloy Matrix Composites Manufactured Using a New Sintering Approach

Uğur Avci p. 344  abstract