Vol. 61, No. 3, 2020
Simulation of the Creep Strain of Carbon-Based Cathode Material in the Aluminum Electrolysis
p. 241 abstract
Alumina Extraction from Kaolinite via Calcification-Carbonation Process
p. 248 abstract
Technology of Gold Extraction from Mature Dumps by Thiourea Leaching
p. 257 abstract
Hereditary Effect of the Structure of the Charge on Density, Gas Content, and Processes of Solidification of an Al–Si–Cu Alloy System
p. 265 abstract
Influence of the Combined Radial Shear Rolling and Rotary Forging on the Deformation Mode of the Small-Diameter Rod Billet Made of Titanium Alloys
p. 271 abstract
Microhardness and Texture Evolution of Ultralight Mg–Li Alloy Processed by Cold Rolling
p. 280 abstract
Diffusion of Tin in a Solid Solution of the Copper–Tin System
p. 291 abstract
Aluminum Alloy Matrix Composite Reinforced with Metallic Glasses Particles Using Hot-Roll Bonding
p. 297 abstract
Composition and Crystalline Structure of Ternary Phases in the Ta–Ni–Al System
p. 303 abstract
Nanostructured Gradient Material Based on the Cu–Cr–W Pseudoalloy Fabricated by High-Energy Ball Milling and Spark Plasma Sintering
p. 309 abstract
Effect of Temperature on the Formation of Stable and Metastable Aluminide Phases in Al‒Zr‒Nb Alloys
p. 319 abstract
Tribological Characteristics and Corrosion Resistance of Coatings Obtained by Electrospark Alloying, Pulsed Cathodic Arc Evaporation, and Hybrid Technology Using TiCNiCr and TiCNiCr–Dy2O3 Electrodes
p. 325 abstract
The Production of AZ31 Alloys by Gas Atomization Method and Its Characteristics
p. 332 abstract
Characterization of Tantalum–Titanium Powders with Universal Powder Bed (UPB) System for Electron Beam Melting Process
p. 346 abstract
Influence of Sodium Microalloying on Rolling Contact Endurance and Mechanical Properties of Hot-Deformed Powder Steels
p. 354 abstract
Production of Cast Materials Based on the Cr2AlC MAX Phase by SHS Metallurgy Using Coupled Chemical Reactions
p. 362 abstract
Hard Alloy Production by SHS Compaction in Open Matrix
p. 368 abstract
Preparation and Study of Ni–Al–O System Cermet Composites with a Small Addition of MgAl2O4 Nanoparticles
p. 375 abstract
Investigating the Possibility of Fabricating Pr2Fe14B/α-Fe Composite Materials by Oxidation of the Pr–Fe–B Alloy in a Fluidized-Bed Jet Mill
p. 382 abstract
Effects of Titanium Nitride Particles on Copper Matrix-Graphite Composite Properties
p. 387 abstract