Vol. 60, No. 3, 2019

Russian Journal of Non-Ferrous Metals

Metallurgy of Nonferrous Metals

Interaction of Salt Melts of Magnesium Production with Atmospheric Air

I. M. Komelin and A. P. Lysenko p. 215 abstract

Foundry

Numerical Investigation into the Influence of Overheating of Aluminum Melt on the Heat Exchange in the Continuous Combined Casting and Pressing

A. P. Skuratov, A. S. Potapenko, Yu. V. Gorokhov and N. P. Popiyakova p. 225 abstract

Pressure Treatment of Metals

Methods of Compaction of the Al–B–W Powder Composition in a Metal Shell

V. A. Glushenkov, I. A. Belyaeva, F. V. Grechnikov, V. A. Mironov, Yu. S. Usherenko and V. I. Pesotsky p. 232 abstract

Physical Metallurgy and Heat Treatment

Effect of Bismuth and Lead on the Phase Composition and Structure of the Al–5% Si–4% Cu–4% Sn Alloy

K. Yu. Chervyakova, A. O. Yakovleva, N. A. Belov and I. V. Shkalei p. 239 abstract

Influence of a Magnetic Field on Structure Formation during the Crystallization and Physicomechanical Properties of Aluminum Alloys

K. N. Vdovin, G. A. Dubsky, V. B. Deev, L. G. Egorova, A. A. Nefediev and E. S. Prusov p. 247 abstract

Influence of Ultrafine-Grained Structure on the Kinetics and Fatigue Failure Mechanism of VT6 Titanium Alloy

G. V. Klevtsov, R. Z. Valiev, I. P. Semenova, N. A. Klevtsova, V. A. Danilov, M. L. Linderov and S. V. Zasypkin p. 253 abstract

Energy and Resource Saving

Investigation into the Possibility of Reducing Carbon Dioxide Emissions during the Waelz Process of the Oxidized Zinc-Containing Material

V. A. Shumskiy, N. A. Kulenova, Zh. S. Onalbayeva, Z. M. Akhmetvaliyeva and S. V. Mamyachenkov p. 259 abstract

Theory and Processes of Forming and Sintering of Powder Materials

Mechanical Alloying with the Partial Amorphization of the Fe–Cr–Co–Ni–Mn Multicomponent Powder Mixture and Its Spark Plasma Sintering to Produce a Compact High-Entropy Material

N. A. Kochetov, A. S. Rogachev, A. S. Shchukin, S. G. Vadchenko and I. D. Kovalev p. 268 abstract

Mechanical and Tribological Behavior of Powder Metallurgy Processed Aluminum–Graphite Composite

Norul Amierah Binti Nor Zamani, AKM Asif Iqbal and Dewan Muhammad Nuruzzaman p. 274 abstract

Self-Propagating High-Temperature Synthesis

Synthesis of TiC–NiCrBSi Binder Alloy Composite Powders for Cladding and Deposition of Wear-Resistant Coatings

G. A. Pribytkov, I. A. Firsina, V. V. Korzhova, M. G. Krinitcyn and A. A. Polyanskaya p. 282 abstract

Ignition of a Mixture of Tungsten with Teflon and Aluminum Additives

M. I. Alymov, S. G. Vadchenko and I. S. Gordopolova p. 290 abstract

Refractory, Ceramic, and Composite Materials

Macrostructure and Strength of the Al–Zn–Sn Composite Produced by Liquid-Phase Sintering of the Al–Zn Alloy and Pure Tin Powder Mixture

N. M. Rusin and A. L. Skorentsev p. 295 abstract

Synthesis of Ni(Cr)–hBN Nanocomposite by Mechanical Alloying and Its Thermodynamical Evaluation

S. E. Aghili, M. Shamanian and R. Amini Najafabadi p. 301 abstract

Fabrication, Microstructure and Properties of the Mid-Fraction SiC Particles/6061Al Composites Using an Optimized Powder Metallurgy Technique

Yinqiu Huang, Guohong Chen, Binhao Wang, Jianhua Zhang and Wenming Tang p. 312 abstract

Research on the Properties of Boron Carbide Particle-Reinforced Copper-Matrix/Graphite Self-Lubricating Composite Materials

Tian Yu-nan, Dou Zhi-he, Niu Li-ping and Zhang Ting-an p. 319 abstract

Modification of the Surface, Particularly by Beams of Charged Particles and Photon and Plasma Fluxes

Research into the Effect of Temperature Fields of Heating during Continuous Laser Treatment on the Performance of the T15K6 Carbide Insert Plates

S. I. Bogodukhov, E. S. Kozik and E. V. Svidenko p. 328 abstract

Contents