Contents
Russian Journal of Non-Ferrous Metals

Vol. 52, No. 3, 2011

A simultaneous English language translation of this journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Journal of Non-Ferrous Metals ISSN 1067-8212.

Metallurgy of Nonferrous Metals

Thermodynamic Characteristics of the Pb–Bi Alloys in the KCl–PbCl₂Melt

Yu. R. Khalimullina, Yu. P. Zaikov, P. A. Arkhipov, V. V. Ashikhin, G. V. Skopov,
A. S. Kholkina, and N. G. Molchanova p. 197  abstract

Plastic Properties of Homogenized Coke–Pitch Compositions

E. P. Vershinina, E. M. Gil’debrandt, and V. K. Frizorger p. 205  abstract

Kinetics of Hydrochloric Acid Leaching of Smithsonite

Nikhil Dhawan, M. Sadegh Safarzadeh, and Mustafa Birinci p. 209  abstract

Metallurgy of Rare and Noble Metals

Investigation into the Influence of Hydroxyl Ions on the Mechanism of Interaction
between Cyanic Compounds of Gold and an Active Surface of Carbon Sorbents

V. V. Elshin, V. A. Shagun, A. A. Kolodin, and A. E. Ovsyukov p. 217  abstract

Foundry

Features of Interaction between Copper Melt and Air Oxygen after Deoxidization

A. N. Konovalov and S. M. Urumbaev p. 221  abstract

Improvement of Configuration of a Metal Reservoir for Casting with Centrifugation of the Melt

V. N. Sharshin, V. A. Kechin, E. V. Sukhorukova, and D. V. Sukhorukov p. 223  abstract

Pressure Treatment of Metals

Temperature Conditions and Modes of Formation of Residual Stresses in Wiredrawing

G. L. Kolmogorov, N. A. Kosheleva, E. V. Kusnetsova, and T. V. Chernova p. 227  abstract

Region for Extrolling Feasibility and Effective Deformation Modes

A. R. Fastykovskii p. 230  abstract

Physical Metallurgy and Heat Treatment

Investigation of Zirconium-Containing Aluminum Alloys

V. M. Grigor’ev p. 234  abstract

Influence of Iron and Silicon on the Phase Composition and Structure
of Heat-Resistant Casting Nikalines Strengthened by Nanoparticles

N. A. Belov, A. N. Alabin, and S. S. Mishurov p. 244  abstract

Purification of an Industrial Aluminum Alloy by Melt Stirring
during Ohno Continuous Casting Process

Simbarashe Fashu, Li Jianguo, and Hu Qiao Dan p. 254  abstract

Powder Materials and Coatings

High-Temperature Electrometallurgical Synthesis of Tungsten and Molybdenum Carbides

V. V. Malyshev and A. I. Gab p. 262  abstract

Economics and Management

Features of Decision Making While Managing Enterprises in Nonferrous Metallurgy
Using the Example of a Gold-Mining Company

I. Ya. Gol’fand, N. V. Krapukhina, and E. M. Fokina p.266  abstract

Self-Propagating High-Temperature Synthesis

Current-Conducting Coatings Based on Heat-Resistant Titanium Compounds Obtained
by Self-Propagating High-Temperature Synthesis

A. M. Shul’pekov, G. V. Lyamina, T. V. Kal’yanova, O. K. Lepakova, and Yu. M. Maksimov p. 275  abstract

Refractory, Ceramic, and Composite Materials

Phase Transformations during Annealing of WC–Co Powders

M. N. Putintseva and Yu. P. Bashurov p. 280  abstract

Activated Sintering of W–HfC Composite Materials

S. V. Vikhman, O. G. Klimova, S. S. Ordan’yan, O. V. Tolochko, and D.-I. Cheong p. 285  abstract

Effect of Electric Field on the Destruction of the Friction Surface of Sintered Metal Composites

M. I. Aleutdinova and V. V. Fadin p. 290  abstract

High-Temperature Strength and Refractoriness of Doped WC–Co–Ni–Re(Mn) Hard Alloys

I. B. Panteleev, T. V. Lukashova, and S. S. Ordan’yan p. 295  abstract

Modification of the Surface, Particularly By Beams of Charged Particles
and Photon and Plasma Flows

Installation for Vacuum-Arc Treatment of the Surface of Construction Materials

V. V. Demidenko, G. V. Potemkin, G. T. Starostin, Yu. V. Os’kin, and P. E. Revin p. 298  abstract

Changes in Microstructure of Cold-Worked Aluminum–Lithium Alloy 1441
Initiated by Powerful Pulsed Ion Beams

V. V. Ovchinnikov, G. E. Remnev, N. V. Gushchina, V. I. Gusel’nikov, S. M. Mozharovskii,
A. V. Filippov, and L. I. Kaigorodova p. 304  abstract

Nanostructured Materials and Functional Coatings

Nanostructured Ti–Cr–B–N and Ti–Cr–Si–C–N Coatings for Hard-Alloy Cutting Tools

F. V. Kiryukhantsev-Korneev, A. N. Sheveiko, V. A. Komarov, M. S. Blanter,
E. A. Skryleva, N. A. Shirmanov, E. A. Levashov, and D. V. Shtansky p. 311  abstract

Investigation into Processes of Mechanical Alloying when Obtaining Composite Materials
with Nanodimensional Strengthening Particles

V. A. Popov, V. A. Zaitsev, A. S. Prosviryakov, M. E. Samoshina, T. B. Sagalova,
I. I. Khodos, and M. N. Koval’chuk p. 319  abstract

Control over Quality of Processes and Materials

Development of Environmentally Oriented Processes for Obtaining the Articles
from Aluminum Powders by Powder Metallurgy: Report 1. Functional Simulation
of Processes of Powder Metallurgy of Aluminum

A. Yu. Kem p.324  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.