Contents

Russian Journal of Non-Ferrous Metals


Vol. 63, No. 2, 2022


Metallurgy of Nonferrous Metals

Investigation of Pobeda Furnace Bubbling Zone Physics Using Cold Modeling Method. Part 2. Hydro-Gas Dynamics of Liquid Blowing by Gas Using Bottom Gas-Protected Lance

K. V. Bulatov, V. P. Zhukov, E. V. Bratygin, N. A. Tomilov and V. A. Menshikov p. 113  abstract

Extraction of Lithium from Petalite Ore by Chloride Sublimation Roasting

I. M. Komelin p. 121  abstract

Carbide Slag as a Calcium Source for Bauxite Residue Utilization via Calcification–Carbonization Processing

Yang Chen, Guozhi Lv, Ting-an Zhang, York R. Smith and Xi Chao p. 132  abstract

Optimal Factor Evaluation for the Extraction of Alumina from Clays by Sulfuric Acid Leaching Process Using Box–Behnken Design Methodology

Volkan Arslan p. 146  abstract


Metallurgy of Rare and Noble Metals

Production and Quality Control of High-Purity Rare-Earth Metal Oxides for Scintillator Crystals of Detecting Medical Systems

O. V. Yurasova, D. A. Samieva, E. S. Koshel and Yu. A. Karpov p. 157  abstract


Pressure Treatment of Metals

The Influence of Multipass Friction Stir Processing on Formation of Microstructure and Mechanical Properties of Ti6Al4V Alloy

A. P. Zykova, A. V. Vorontsov, A. V. Chumaevskii, D. A. Gurianov, A. V. Gusarova, N. L. Savchenko and E. A. Kolubaev p. 167  abstract


Foundry

Vapor–Liquid Equilibria in the Tin–Lead System in a Primary Vacuum

S. A. Trebukhov, V. N. Volodin, O. V. Ulanova, A. V. Nitsenko and N. M. Burabayeva p. 177  abstract


Physical Metallurgy and Heat Treatment

Influence of the Composition of a Boron-Containing Active Medium in the Form of a Coating on the Structure and Properties of the Diffusion Layer of Titanium Parts

A. M. Guryev, S. G. Ivanov, M. A. Guryev, V. B. Deev and M. V. Loginova p. 184  abstract

Effect of Copper Concentration and Annealing Temperature on the Structure and Mechanical Properties of Ingots and Cold-Rolled Sheets of Al–2% Mn Alloy

N. O. Korotkova, P. K. Shurkin, S. O. Cherkasov and A. A. Aksenov p. 190  abstract

Microstructural and Mechanical Properties of A356/Ni Alloys Produced by the Mechanochemical Method

Tansel Tunçay p. 201  abstract

Analysis of Parametric Influences and Tribological Behaviour of Al 6063–SiC–Al2O3

P. Rajasekaran p. 212  abstract

Effect of Rare Earth Elements on the Microstructural and Mechanical Properties of ZK60 Alloy after T5 Treatment

N. Hemati, Y. Palizdar, A. Kolahi, M. Shariat Razavi, A. Kheradmand and H. Torkamani p. 223  abstract


Nanostructured Materials and Functional Coatings

In-situ Manufacturing of Al7075/TiO2, Al7075/SiC and Al7075/TiO2/SiC Based Composite Layers by Friction Surfacing on Commercially Pure Aluminum

S. R. Alavi Zaree, M. Khorasanian and O. Gholam Mashak p. 237  abstract