Contents
Russian Journal of Non-Ferrous Metals

Vol. 55, No. 2, 2014

A simultaneous English language translation of this journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Journal of Non-Ferrous Metals ISSN 1067-8212.

Mineral Processing of Nonferrous Metals

Development of a New Flowchart and the Method for Flotation of Ores
of the Olimpiadinskoe Deposit

S. I. Evdokimov, M. S. Datsiev, and I. Yu. Podkovyrov p. 105  abstract

Metallurgy of Nonferrous Metals

Processing Molybdenum Concentrates Using Low-Temperature Oxidizing–Chlorinating Roasting

P. V. Aleksandrov, A. S. Medvedev, A. A. Kadirov, and V. A. Imideev p. 114  abstract

Quality of Anode Mass in Aluminum Electrolysis Technology with the Soderberg Anode

E. M. Gil’debrandt, E. P. Vershinina, and V. K. Frizorger p. 120  abstract

Electrochemical Properties of a Lithium–Potassium Chloride Molten Eutectic Mixture Held
in Contact with Neodymium and Dysprosium

A. V. Kovalevskii and D. A. Kondrat’ev p. 125  abstract

Metallurgy of Rare and Noble Metals

Niobium and Tantalum: State of the World Market, Application Fields, and Sources
of Raw Materials. Part 2

E. E. Nikishina, D. V. Drobot, and E. N. Lebedeva p. 130  abstract

Technologies of Secondary Refractory Rare Metals (Review)

G. A. Kolobov, V. S. Panov, and N. N. Rakova p. 141  abstract

Pressure Treatment of Metals

Features of Drawing Axially Symmetric Composite Wares with a Filament Core Made
of Nonferrous Metals and Alloys

V. V. Bitkov p. 148  abstract

Optimization of Geometry of Process Tool for Pressing Trimetal Billet

G. L. Kolmogorov, N. A. Kosheleva, and T. V. Chernova p. 154  abstract

Physical Metallurgy and Heat Treatment

Influence of the Nonequilibrium Crystallization on the Phase Composition
of the Al–Mo–Ti Alloy

N. I. Sel’menskikh, V. M. Chumarev, S. V. Zhidovinova, A. A. Pankratov,
R. I. Gulyaeva, A. N. Rylov p. 157  abstract

Energy Saving and Environmental Protection

Computation of 3D Induction Heating Problems by Finite Volume Method-Application
to the Hot Deformation of Aluminum in Transient Regime

A. Tibouche p.163  abstract

Production Processes and Properties of Powders

Structure of Fullerene-Containing Deformed Powder Steels

V. N. Antsiferov, L. M. Grevnov, M. F. Torsunov, and V. A. Boyarshinov p. 167  abstract

Theory and Processes of Forming and Sintering of Powder Materials

Investigation into the Influence of Speed Characteristics of Compaction on the Quality
of Wares Made of Uranium Dioxide

A. V. Gorbushin, B. V. Syrnev, Yu. G. Rusin, and G. M. Shevchenko p. 172  abstract

Self-Propagating High-Temperature Synthesis

Self-Propagating High-Temperature Synthesis of Nanostructured Aluminum Nitride Powder
with the Use of Aluminum Fluoride and Sodium Azide

Yu. V. Titova, L. A. Shiganova, D. A. Maidan, and G. V. Bichurov p. 177  abstract

Refractory, Ceramic, and Composite Materials

Structure and Phase Composition of Composite Pellets Based on the ALTEK Heat-Resistance
Aluminum Alloy with Boron-Containing Filler

E. I. Kurbatkina, N. A. Belov, and M. V. Gorshenkov p. 182  abstract

The Features of Influence of ZrO₂ and WC Nanodispersed Additives on the Properties
of Metal Matrix Composite

L. V. Tokova, A. A. Zaitsev, V. V. Kurbatkina, E. A. Levashov, D. A. Sidorenko, and V. A. Andreev p. 186  abstract

Porous Materials and Biomaterials

Computational and Theoretical Evaluation of the Penetration Depth of Reactions
by the Infiltration of Pyrolytic Matrices in Porous Skeletons

A. N. Timofeev p. 191  abstract

Modification of the Surface, Particularly by Beams of Charged Particles
and Photon and Plasma Fluxes

Features of Structure Formation of the Surface Layer in the Course
of Electroexplosive Alloying Tungsten Carbide Hard Alloy

T. N. Oskolkova, E. A. Budovskikh, and V. F. Goryushkin p. 196  abstract

Nanostructured Materials and Functional Coatings

Theoretical Evaluation of the Friction Coefficient of a Hip Joint Prosthesis Made
of Carbon Nanocomposite

V. F. Tatarinov and P. I. Zolkin p. 201  abstract

Formation of Protective Coatings on Steel Kh12MF by the Force
of the Sequential Electric Spark Treatment by Boride and Carbon-Containing Electrodes

E. I. Zamulaeva, E. A. Levashov, Yu. S. Pogozhev, T. A. Sviridova,
M. I. Petrzhik, and A. E. Kudryashov p. 205  abstract

Application of Powder Materials and Functional Coatings

Tribotechnical Properties of Powder Hard Alloys of Chromium Carbide
with Titanium Fabricated by Explosive Pressing

A. V. Krokhalev, V. O. Kharlamov, S. V. Kuz’min, and V. I. Lysak p.212  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.