Contents
Russian Journal of Non-Ferrous Metals

Vol. 53, No. 2, 2012

A simultaneous English language translation of this journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Journal of Non-Ferrous Metals ISSN 1067-8212.

Mineral Processing of Nonferrous Metals

Developing the Technology of Complex Adoption of Phosphate Rare-Earth Metal Ores
from the Tatarskoe Deposit

V. I. Bragina and Yu. V. Sushkina p. 111  abstract

Control over the Reagent Mode of Flotation of Copper–Nickel Ores

A. M. Kokorin and A. M. Kurchukov p. 116  abstract

Flotation Concentration of the Sulfide Antimony–Arsenic Gold-Bearing Ore

A. V. Kanarskii, E. V. Adamov, and L. N. Krylova p. 120  abstract

Combined Processing Technology of the Udokan Sulfide Copper Concentrate

A. S. Medvedev, Tu So, and A. M. Ptitsyn p. 125  abstract

Metallurgy of Rare and Noble Metals

The Possibility of Using Acid–Alkali Solutions to Precipitate Rubidium in the Form
of Its Hexachlorotelluride

V. M. Sizyakov, Yu. A. Zaitsev, and S. I. Lyakh p. 129  abstract

Physical Metallurgy and Heat Treatment

Analysis of the Relation between the Characteristics of the Two-Phase Matrix Structure
for the Random Distribution of Nonequiaxial Inclusions in the Body Bulk

A. Yu. Churyumov and V. V. Teleshov p. 132  abstract

The Behavior of Magnesium Alloys during Explosion Welding and Ways to Prevent Their Failure

Yu. P. Trykov, V. G. Shmorgun, V. N. Arisova, and I. A. Ponomareva p. 139  abstract

Pressure Treatment of Metals

The Development of Technology for Making SvAK12 Welding Wire from Shaving Billet

N. N. Zagirov, I. L. Konstantinov, and E. V. Ivanov p. 145  abstract

Foundry

Low-Frequency Pulsations of the Melt during the Lost Foam Casting Process: Part 2

N. V. Nesterov and A. G. Ermilov p. 150  abstract

Structural Macrokinetics. Self-Propagating High-Temperature Synthesis

The Use of Self-Propagating High-Temperature Synthesis and Argon-Arc Overlaying
when Strengthening the Surface of Products Made of Titanium Alloys

V. L. Kvanin, N. T. Balikhina, A. G. Merzhanov, and V. G. Karabakhin p. 155  abstract

Powder Materials and Coatings

The Effect of Deposition Parameters of Multilayered Nanostructure Ti–Al–N/Zr–Nb–N/Cr–N
Coatings Obtained by the Arc-PVD Method on Their Structure and Composition

I. V. Blinkov and A. O. Volkhonskii p.163  abstract

Fabrication of Porous NiTi Alloy via Powder Metallurgy and Its Mechanical Characterization
by Shear Punch Method

Sorush Parvizi, Vahid Hasannaeimi, Ehsan Saebnoori,
Taghi Shahrabi, and Sayed Khatiboleslam Sadrnezhaad p. 169  abstract

On Conversion Coating Treatments to Replace Chromating for Al Alloys:
Recent Developments and Possible Future Directions

S. A. Kulinich and A. S. Akhtar p. 176  abstract

Automation of Production Processes

Experimental Investigations and Mathematical Modeling of the Dynamics
of Thermal Decomposition of Carbon Composites

G. S. Soshkin, A. L. Rutkovskii, L. Sh. Tsemekhman, S. I. Sineva, and S. V. Soshkin p.204  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.