Contents
Russian Journal of Non-Ferrous Metals

Vol. 51, No. 2, 2010

A simultaneous English language translation of this journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Journal of Non-Ferrous Metals ISSN 1067-8212.

Metallurgy of Nonferrous Metals

Investigation of Regularities of Ion Flotation of Copper with the Use
of Sodium Diethyldithiocarbamate

K. A. Strel’tsov and D. V. Abryutin p. 85  abstract

Mineral Processing of Nonferrous Metals

Development of Investigation Techniques of Froth Flotation from the Beginning
of Its Wide Industrial Use. Part Two. Methods of Evaluation of the Adsorption
and Orientation of Heteropolar Molecules of Reagents in the Adsorption Layer
on the Surface of Particles

V. I. Melik-Gaikazyan, N. P. Emel’yanova, and P. S. Kozlov p. 89  abstract

Metallurgy of Nonferrous Metals

Investigation of the Selective Leaching of Cadmium from the Active Mass
of Alkali Accumulators

S. V. Karelov, A. R. Barashev, O. S. Anisimova, and S. V. Mamyachenkov p. 94  abstract

Investigation of the Kinetics of Cobalt Decarburization in a Direct-Current Arc Furnace

V. P. Zhukov, V. A. Kniss, S. V. Kniss, and A. S. Avdeev p. 97  abstract

Electrochemical Oxidation of Nickel Sulfide Metallic Alloys

E. N. Selivanov, O. V. Nechvoglod, S. V. Mamyachenkov, and V. A. Sergeev p. 101  abstract

Viscosity and Conductivity of Melts of the GeO₂–PbO System

V. M. Denisov, S. A. Istomin, L. T. Denisova, and V. V. Ryabov p. 109  abstract

Integrated Processing of Kaolin Concentrates using Fluoride Metallurgy

V. S. Rimkevich, A. A. Pushkin, Yu. N. Malovitskii,
T. Yu. Eranskaya, and I. V. Girenko p. 113  abstract

Results of a Performance Test of Making a Colloidal Anode Mass for a Soderberg Anode

V. K. Frizorger, E. M. Gil’debrandt, and E. P. Vershinina p. 119  abstract

Foundry

A Low-Cost Vacuum Casting Equipment for Aluminium Alloys

B. Aremo and M. O. Adeoye p. 124  abstract

Physical Metallurgy and Heat Treatment

Influence of the Precrystallization Flow of Copper and Aluminum Melts
on the Mechanical Properties of Ingots

R. A. Apakashev p. 131  abstract

Pressure Treatment of Metals

Minimization of Breaks during Drawing Thin Wire of Nonferrous Metals

V. V. Bitkov p.134  abstract

Powdered Materials and Coatings

Determination of Optimal Conditions for Obtaining a Mixture of Associated Dioxides
of Zirconium and Silicon by Sintering of ZrSiO₄ with MgO

Yu. A. Simonov, A. A. Kritskii, V. N. Rychkov, and V. A. Tomashov p. 140  abstract

Energy Saving and Environmental Protection

Parameters of the Distribution of Fluorine, Sulfur, and Sodium in the Baikal Region
with the Production of Primary Aluminum

N. I. Yanchenko and A. N. Baranov p. 144  abstract

Production Processes and Properties of Powders

Phase and Structural Transformations in Production of Powders of Intermetallic Compounds

A. V. Kasimtsev and V. V. Zhigunov p. 150  abstract

Investigation of the Morphology and Particle Size of Silicon Carbide Nanopowders
Using Electron Microscopy

V. V. Rudneva, G. V. Galevskii, and E. K. Yurkova p. 158  abstract

Granulation of Copper-Based Compositions by Reaction Milling in an Attritor

V. A. Dovydenkov and M. V. Yarmolyk p. 165  abstract

Carbon–Silicon Anode Composites for Lithium-Ion (Polymer) Rechargeable Batteries

D. V. Onishchenko, A. A. Popovich, and Yu. N. Boiko p. 169  abstract

Theory and Processes of Formation and Sintering of Powdered Materials

Comparative Investigations of Aftersintering of UO₂ Fuel Pellets

V. V. Basov p. 173  abstract

Self-Propagating High-Temperature Synthesis

The Effect of Mechanical Activation of a Reaction Mixture on the Velocity
of the Wave Propagation of SHS Reactions and Microstructure of the TiC–Ni Hard Alloy

N. A. Kochetov, A. S. Rogachev, and Yu. S. Pogozhev p. 177  abstract

Refractory, Ceramic, and Composite Materials

Application of Mechanochemical Activation in Production of Zircon Ceramics

V. N. Antsiferov, V. B. Kul’met’eva, S. E. Porozova, B. L. Krasnyi,
V. P. Tarasovskii, and A. B. Krasnyi p. 182  abstract

Constructional Carbide Steels: A Review of Their Fabrication, Properties, and Application

L. I. Svistun p. 188  abstract

Modifying the Surface Including the Beams of Charged Particles
and Photons and Plasma Fluxes

Production of Nanopowders of Metal Oxides by Evaporation in the Pulsed Electron Beam

V. G. Il’ves, A. S. Kamenetskikh, Yu. A. Kotov, A. I. Medvedev, and S. Yu. Sokovnin p.197  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.