Vol. 61, No. 1, 2020

Russian Journal of Non-Ferrous Metals

Metallurgy of Nonferrous Metals

Oxidation of Fayalite in Molten Nickel Slag

Yongbo Ma and Xueyan Du p. 1 abstract

Preparation of High-Purity Tin by Zone Melting

Huan Zhang, Jinyang Zhao, Junjie Xu, Yifu Li, Zhenghao Pu, Baoqiang Xu and Bin Yang p. 9 abstract

Optimization of Jet Pyrolysis Preparation of Micro-Nano MgO Magnesium Oxide

Chao Lv, Tiyuan Xia, Liping Niu and Qiuyue Zhao p. 21 abstract

Sulfation Kinetics of Low-Grade Nickel–Copper Sulfide Ore in the Sulfuric Acid Roasting Process

Fuhui Cui, Wenning Mu, Yuchun Zhai and Xueyi Guo p. 27 abstract

Leaching Ni and Co from Saprolitic Laterite Ore by Employing Atmospheric Acid Leaching Solution with High Concentration of FeCl₃ at Mild Conditions

Zhang Peiyu, Guo Qiang, Qu Jingkui and Qi Tao p. 42 abstract

Intensification of Sulfuric Acid Leaching of Copper from Sulfide Concentrates Using Ozone and Iron Ions

L. N. Krylova p. 49 abstract

Mechanism for the Reduction of Oxides in Copper-Smelting Slag under Blowing with CO–CO₂ Gas Mixtures

A. A. Komkov and R. I. Kamkin p. 57 abstract

Mathematical Model of Magnetic Hydrodynamics and Heat Transfer in an Aluminum Reduction Cell

A. A. Pianykh, G. V. Arkhipov and Ya. A. Tretyakov p. 65 abstract

Foundry

Increasing the Properties of Copper Alloys by Refining–Modifying Treatment with Melt Carbonates of Alkaline Earth Metals

V. A. Korovin, T. D. Kurilina, S. V. Plokhov and V. B. Deev p. 74 abstract

Pressure Treatment of Metals

Developing, Simulating, and Researching a Production Process of Long Deformed Semi-Fabricated Aluminum–Magnesium Products with a Varying Scandium Content

S. B. Sidelnikov, O. V. Yakivyuk, V. N. Baranov, E. Yu. Zenkin and I. N. Dovzhenko p. 81 abstract

Physical Metallurgy and Heat Treatment

Effect of Aging Temperature on the Microstructure and Shear Strength of SAC0307-0.1Ni Lead-Free Solders in Copper Joints

Phairote Sungkhaphaitoon and Suchart Chantaramanee p. 89 abstract

Studies on Structural Changes in the Surface Layers of Aluminum Alloys Based on the Al–Si–Cu System under Frictional Deformation

O. O. Shcherbakova, T. I. Muravyeva, D. L. Zagorskiy and I. V. Shkalei p. 99 abstract

Corrosion and Protection of Metals

Corrosion of an Aluminum Matrix Composite in situ Based on Al–7Si–1Fe Alloy

A. B. Finkelstein, A. V. Shak and A. A. Schaefer p. 108 abstract

Production Processes and Properties of Powders

Preparation of Activated Carbon from Cashew Nut Shells for Water Purification

Kouassi Brou Guillaume, N. S. Serpokrylov, A. S. Smolyanichenko, E. G. Cheblakova and V. A. Gorina p. 112 abstract

Self-Propagating High-Temperature Synthesis

Production of the 70% Cu–30% Fe Alloy by SHS Metallurgy and Electrometallurgy: Comparative Analysis of Microstructures

V. V. Sanin, M. R. Filonov, V. I. Yukhvid, Yu. A. Anikin and D. M. Ikornikov p. 119 abstract

Synthesis of Nb₂AlC MAX Phase by SHS Metallurgy

I. D. Kovalev, P. A. Miloserdov, V. A. Gorshkov and D. Yu. Kovalev p. 126 abstract

Nanostructured Materials and Functional Coatings

Deposition of Amorphous Hardening Coatings by Electrospark Treatment in a Mixture of Crystalline Granules

A. A. Burkov and V. O. Krutikova p. 132 abstract

Contents