Contents
Russian Journal of Non-Ferrous Metals

Vol. 52, No. 1, 2011

A simultaneous English language translation of this journal is available from Allerton Press, Inc.
Distributed worldwide by Springer. Russian Journal of Non-Ferrous Metals ISSN 1067-8212.

Mineral Processing of Nonferrous Metals

Selection of Selective Collectors for Flotation of Minerals with Similar Flotation Properties

V. A. Ignatkina p. 1  abstract

Metallurgy of Nonferrous Metals

Kinetics of Dissolution of Sulfur in Tetrachloroethylene

Yu. T. Mel’nikov, D. O. Krinitsyn, and N. N. Zhukova p. 8  abstract

Oxidation of Liquid Alloys of the Bi–Pb System

N. V. Belousova, E. O. Arkhipova, and V. A. Parfenov p. 12  abstract

A Method for Determining the Productivity of Electrolyzers for Aluminum Production

S. I. Nozhko p. 16  abstract

Metallurgy of Rare and Noble Metals

The Recovery of Vanadium from Ash Obtained during the Combustion of Fuel Oil
at Thermal Power Stations

M. V. Tsygankova, V. I. Bukin, E. I. Lysakova, A. G. Smirnova, and A. M. Reznik p. 19  abstract

Foundry

Obtaining Casts of Aluminum Alloys by Foundry in Loose Molds Fabricated
on Installations of Three-Dimensional Printing

V. V. Drokina, V. D. Belov, and S. N. Chekhonin p. 24  abstract

Pressure Treatment of Metals

Research into an Additional Mechanism of Lowering the Pressure and Increasing
the Compressions during the Asymmetric Rolling of Strips of Aluminum Alloys

E. A. Maksimov p. 29  abstract

Analysis of the Structure Formation and Properties of the VT6 Alloy
during Upsetting of the Symmetrically Truncated Conical Billets

N. V. Lopatin, O. N. Maradudina, and G. S. Dyakonov p. 33  abstract

Taking into Account Grain Growth during the Finite-Element Modeling
of the Superplastic Formation of Promising Construction Materials

T. M. Zagirov, Yu. V. Zherebtsov, E. M. Kadirov, and F. U. Enikeev p. 39  abstract

Physical Metallurgy and Heat Treatment

Modeling for the Structure Evolution of Alloys of the Al–Cu–Mg System during Natural Ageing

A. N. Solonin, A. Yu. Churyumov, A. V. Mikhailovskaya, and M. A. Ryazantseva p. 44  abstract

Thermodynamic Calculations of the Effective Solidification Range and Its Relation
to Hot Cracking of Aluminum-Based Ternary Alloys

V. S. Zolotorevskiy, A. V. Pozdniakov, and A. V. Khvan p. 50  abstract

Powder Materials and Coatings

Formation of Electrospark Coatings of the VK8 Hard Alloy with the Al₂O₃Additive

S. V. Nikolenko, S. A. Pyachin, and A. A. Burkov p. 56  abstract

Energy Saving and Environmental Protection

Structure of a Torch Formed during Melting of Copper Charge in a Furnace Outokumpu

D. Choshnova and B. Stefanov p.62  abstract

Automation of Production Processes

Automated Identification and Elimination of Cleavages of the Lining Plaster
of a Rotating Furnace without Stopping

Z. G. Salikhov, R. T. Gazimov, M. V. Shubin, and A. A. Bekarevich p. 69  abstract

Theory and Processes of Forming and Sintering of Powder Materials

Formation of Structure and Properties during the Thermal Treatment of Powder Steels
with Different Carbon-Containing Components

V. I. Kostikov, Zh. V. Eremeeva, V. Yu. Dorofeev, and N. N. Zherditskaya p. 75  abstract

Liquid-Phase Sintering of Powder Bodies of the Al–Si System

G. N. Romanov p. 82  abstract

Investigation into the Influence of Microstructural Parameters of Fuel Pellets
on Their Stability under the Effect of Thermal Shocks

V. V. Basov, I. V. Petrov, and V. S. Panov p. 86  abstract

Self-Propagating High-Temperature Synthesis

The Self-Propagating High-Temperature Synthesis of a Nanostructured Titanium Nitride Powder
with the Use of Sodium Azide and Haloid Titanium-Containing Salt

L. A. Shiganova, G. V. Bichurov, A. P. Amosov, Yu. V. Titova, A. A. Ermoshkin, and P. G. Bichurova p. 91  abstract

Refractory, Ceramic, and Composite Materials

Obtaining and Investigating Wear Resistance of a Composite Material Based on Titanium Carbosilicide

M. N. Kachenyuk p. 96  abstract

Porous Materials and Biomaterials

The Influence of Production Modes of the Electrocontact Compaction on the Porosity
of the Powder Steel

T. A. Litvinova and S. N. Egorov p. 101  abstract

Modification of the Surface, Particularly by Beams of Charged Particles
and Photon and Plasma Flows

An Implanter with a Mixed Ion Beam for Modifying the Properties of the Surface of Construction Materials

G. V. Potemkin p. 103  abstract

Acquisition and Properties of Wear-Resistant PVD/CVD Coatings on a Hard-Alloy Tool

I. V. Blinkov, V. N. Anikin, R. V. Kratokhvil, A. N. Ivanov^†, M. I. Petrzhik,
Yu. Mikhal’ski, and A. Nakonechny p. 109  abstract

An Installation for the Investigation of Radiation and Thermal Gas Liberation from Inorganic Materials

N. N. Nikitenkov, A. M. Khashkhash, I. A. Shulepov, V. D. Khoruzhii, Yu. I. Tyurin,
I. P. Chernov, and E. N. Kudryavtseva p. 115  abstract

Nanostructured Materials and Functional Coatings

Nanomaterials and Potential Environmental Risks

I. V. Antsiferova p. 120  abstract

Application of Powdered Materials and Functional Coatings

Kinetics of Hydrogen Absorption by Yttrium Dihydride Powder

Yu. V. Levinsky, Yu. B. Patrikeev, and Yu. M. Filyand p.125  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.