Vol. 2020, No. 9, 2020
Kinetic Laws of the Dissolution of Alunite from Alunite Ores with an Alkali Solution
p. 933 abstract
Involvement of the Domestic Manganese Ores in Production
p. 938 abstract
Substantiation of a Combined Technology for the Hydrometallurgical Beneficiation of a Pyrrhotine-Containing Charge Based on Pressure Oxidation Leaching Using Ferric Sulfate as a Pyrrhotine Oxidizer
p. 942 abstract
Combined Flotation Hydrometallurgical Technology for the Beneficiation and Processing of Disseminated Copper–Nickel Ores
p. 955 abstract
Viscosity of the Slags of the Autogenous Smelting of Copper–Zinc Concentrates
p. 959 abstract
Decomposition of an Eudialyte Concentrate with Nitric Acid by Sorption Conversion
p. 964 abstract
Electrical Conductivity of Tungsten-Containing Ammonium Hydroxide Solutions
p. 971 abstract
Joint Effect of Samarium and Holmium on the Strength Properties of Mg–Y–Gd–Zr Alloys
p. 976 abstract
Effect of Rare-Earth Elements and Heat Treatment on the Structure and Properties of a Heat-Resistant Cast Mg–REM–Zr Magnesium Alloy
p. 982 abstract
Thermal Stability of the Structure and Mechanical Properties of Fine-Grained Aluminum Conductor Alloys Al–Mg–Zr–Sc(Yb)
p. 987 abstract
Phase and Structural Transformations in a VTI-4 (Ti–22Al–25Nb) Alloy during High-Rate Hot Compression
p. 999 abstract
Effect of Preliminary Erosive Cutting on the Thermochemical Treatment of a VT6 Alloy and the Structure of Diffusion Layers
p. 1008 abstract
X-ray Diffraction and Differential Scanning Calorimetry of the Crystallization of Amorphous Soft Magnetic Alloys Made of Naturally Doped Ferrophosphorus with One (P), Two (P, Si), and Three (P, Si, C) Amorphizers
p. 1013 abstract
Effect of the Process of Production of Functional Gradient Layered Steel–Aluminum Compositions on Their Structure and Properties
p. 1020 abstract
SHS Introduction of Nitrogen in the Composition of Alloy Steel under Gas Pressure
p. 1027 abstract
Viscosity of the Oxide Solutions Based on Silicon Dioxide and Formed upon Melting of Heat-Insulating and Slag-Forming Izoterm-1600 Materials in Metallurgical Units
p. 1032 abstract
Erratum to: Strength of Aluminum Alloys for Bridge Building
p. 1038 abstract